JOOM I7S TWS True Wireless Earbuds V5.0+ EDR User Manual

9446-NCL-Christmas Gift Earbuds-Manual
Artwork 1:1

TWS TRUE WIRELESS EARBUDS
V5.0+ EAR

User Manual

Specifications:

Waterproof

Functions & instructions:

Press the charging bin key to charge and boost the voltage, and start the machine automatically

• Press the charging bin key to start the boost, take out the headset and start it automatically. The automatic pairing of left and right ears.
• Headphones are not in the charging compartment (left and right headphones can be turned on / off)
• Turn on the Bluetooth connection of the mobile phone and the headset;
• When Bluetooth is not connected, press the start button to switch between Chinese and English voice

Siri
Press and hold the answer key for 2 seconds to start up

Pairing
Open the Bluetooth of the mobile phone, search the TWS” device name, and click the pairing connection

Bluetooth disconnect
The mobile phone actively disconnects Bluetooth

Play/ Pause music
In the connected state, briefly press the answer button (the mobile phone player is turned on) (left and right, and headphones), and the blue light flashes once in 5 seconds

Next song
When connected, double-click the on/off button, and the blue light flashes once in 5 seconds

Answering the phone
In the incoming state, briefly press the answer button once (left or right headphones), and the blue light flashes once in 5 seconds

Hang up
In the call state, briefly press the answer button once (left or right headphones), and the blue light flashes once in 5 seconds

Refuse to answer the phone
Long press for 2 seconds (left and right, and headset), and the blue light flashes once in 5 seconds

Low power prompt
When the voltage is lower than 3.3V (voice prompt once every 1 minute), the red light flashes once every 5 seconds

Shutdown voltage
If the voltage is lower than 3.2V, earbuds shut down immediately and the red light flashes three times

Charging
The voltage is below 4.0V, the red light is on for a long time

Charging complete
In the fully charged state, the voltage is 4.1V (the headset is fully charged, the red light turns to the blue light for 10 seconds, the current is output, and the blue light is off)

Shutdown status
In sleep, standby, and charging state, the headset is automatically turned off

iPhone power display
Bluetooth connection, Apple phone has power display

iPhone volume synchronization
When the Bluetooth connection is successful, and the machine volume is synchronized with the mobile phone volume. (playback status) the blue light flashes once in 5 seconds

Important note:

1.  Do not treat this product with viler objects, so keep away from the high temperature
2.  While using the wireless earbuds please be away from WIFI and routers and other high-frequency transmitter equipment, this will affect the local signal reception resulting in sound card breaking and disconnection
3. Please use this product in a valid environment(10 meters), and do not have entity blocks(such as walls, etc )between Bluetooth devices and headphones
4. This product can be connected to any Bluetooth enabled device & Compatible with IOS and Android devices

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>