CYP AU-A220 Per Channel Amplifier Owner’s Manual

CYP AU-A220 Per Channel Amplifier

Specifications

• Power Output: 20W per channel (8 Ohms)

• Interfaces:

  • Input Ports: 1 S/PDIF, 1 Analog Stereo (3.5mm), 1 Balanced
    Analog Stereo (2 2-pin Terminal Block)

  • Output Port: Speaker Level

• Audio: LPCM 2 Channels, 95dB (1kHz at Full Load)

• Power Supply: 24V/2.7A DC

• Power Consumption: 42W

• Enclosure:

  • Chassis Material: Metal (Steel)
  • Chassis Color: Black
  • Weight: 380g

• Field Firmware Update: RS-232

Product Usage Instructions

Connection Setup

1. Connect the input source to the appropriate input port (S/PDIF, Analog Stereo, Balanced Analog Stereo).
2. Connect the output to the Speaker Level port.
3. Ensure the power supply is connected and turned on.

FAQ
Q: How do I troubleshoot if there is no audio output?
A: Check the input connections, ensure the power supply is functioning, and verify that the audio source is sending a signal. Adjust volume levels and consult the user manual for further troubleshooting steps.

AU-A220 Stereo 20W (8 Ohms) per channel Amplifier

The AU-A220 is a compact 2 channel Digital Amplifier perfect for providing high-quality audio distribution into various AV zones within any multi-room installation. This advanced solution can integrate digital and analogue audio signals from AV sources within the rack enclosure, or receive an audio input from a compatible matrix to distribute the audio to a variety of zones. The small form factor of the amplifier makes it the ideal solution to be placed within a rack enclosure or behind a display in a local zone if required.

The AU-A220 is also compatible with the RAX-300 series, offering installers increased flexibility when mounting multiple units in a rack enclosure. Up to 4 amplifiers can also be powered by a RAX-PSU-24V. Input selection and volume control is possible via the front panel buttons or RS-232 control.

DIAGRAM

Features

• 20w per channel digital stereo amplifier
• Push button volume controls and input selection
• Single zone amplifier
• Digital volume indicator
• Compact design
• D Class digital amplifier
• RS-232 control
• Compatible with the RAX-300 series

SPECIFICATIONS

www.cypeurope.com | sales@cypeurope.com | support@cypeurope.com

References

• Home - CYP

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>