SEALEY TP6806 Adblue Lift Action Pump Instructions

SEALEY TP6806 Adblue Lift Action Pump

IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

• WARNING! Ensure health & safety, local authority, and general workshop practice regulations are strictly adhered to when using this equipment.
• Familiarise yourself with product application and limitations, as well as the specific potential hazards peculiar to this product.
• Maintain the pump in good condition (use an authorised service agent).
• Replace or repair damaged parts. Use genuine parts only. Non authorised parts will invalidate the warranty.
• Pump is specifically designed to pump AdBlue (diesel engine fuel additive). May be used to pump other NON-Corrosive fluids such anti-freeze, degreasants, agricultural and industrial chemicals, and the like.
• Ensure safety eye protection and protective clothing are worn when using this product.
• Keep the work area clean, uncluttered and ensure there is adequate lighting.
• Maintain correct balance and footing.
• Keep children and unauthorised persons away from the working area.
• Dispose of waste liquids in accordance with local authority regulations.
• DO NOT use to extract corrosive fluids.
• DO NOT dismantle, tamper with or adapt the pump for any purpose other than for which it is designed.
• DO NOT use the unit if it has been dropped or mishandled, check the unit to ensure there is no damage.
• DO NOT use the pump as a handle to move the fluid drum.
•  Keep the pump clean and store in a safe dry, childproof location.
• WARNING! DO NOT allow uncontrolled discharge of fluids thus polluting the environment.

INTRODUCTION

Heavy-duty polypropylene construction lift pump. Manufactured with polyethylene parts suitable for transferring AdBlue®. Fitted with 2”Mauser and 2”BSP adaptor for use with 205L drums. Supplied with 1.36m discharge hose. Delivers approximately 250ml per stroke. Refer to instruction manual

© Jack Sealey Limited Original Language Version TP6806 Issue:2 (H,F) 25/06/21
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note : It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important : No Liability is accepted for incorrect use of this product.
Warranty : Guarantee is 12 months from purchase date, proof of which is required for any claim.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>