rizoma PT233 Kit Porta Targa Fox User Manual

July 3, 2024
rizoma

rizoma PT233 Kit Porta Targa Fox

Product Information

Specifications

  • Product Name: Rizoma License Plate Holder
  • Model Number: PT233
  • Difficulty Level: Simple
  • Time of Assemblage: 20-25 Minutes

Product Usage Instructions

Installation Process
Follow the steps below to correctly install your Rizoma License Plate Holder:

  1. Disassemble original components by following Part Number PT233 instructions.
  2. Install the plate for medium/large license plates by following the provided instructions.
  3. Install the plate for small license plates using the provided Part Number instructions.
  4. Proceed to install the universal license plate holder according to Part Number PT233 instructions.
  5. Finally, install the positioning pin as per the provided instructions.

Maintenance and Checks
After installation, ensure that all components of the motorbike function properly, including brakes, throttle, clutch, lights, and steering. It is recommended to periodically check these components, especially after long trips or extended periods of non-use.

Regularly inspect and maintain your Rizoma products. If you notice any leakage, bending, deformation, cracks, chips, or wear, have a Rizoma dealer inspect the products before using your bike again. Do not attempt to repair or modify the products; always replace with Rizoma original components.

Compatibility
Rizoma products may not be compatible with all motorcycles or other aftermarket accessories previously installed. For safety reasons, always consult your Rizoma dealer before installation.

Frequently Asked Questions (FAQ)

  • Q: What should I do if I encounter difficulties during installation?
    A: If you face any challenges during the installation process, please contact your authorized Rizoma dealer for assistance.

  • Q: How often should I inspect my Rizoma products?
    A: The more you ride, the more frequently you should inspect your Rizoma products. Regular checks are recommended, especially after long rides or extended periods of non-use.

Welcome to Rizoma

Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country.

Attention: This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.

  1. Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
  2. For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
  3. After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest repeating these checks periodically, especially after long trips or prolonged periods of not using the bike.

Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case, never try to repair or modify the Rizoma products or their components, always replace with Rizoma original components.
Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety Rizoma suggests to always contact your RIZOMA dealer.
O.E.M.: original equipment manufacturer.

To comply with the TÜV and European Norm in force, the installation of the license plate must be carried out as the enclosed instructions. Consult the website www.rizoma.com, in the license plate support section click “MEDIA” to download the PDF document approval ABE.

Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components.
Warning: Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others, also make sure that the temperature of the exhausts and the engine are similar to the ambient temperature.
WARNING: TO CLEAN YOUR LICENSE PLATE DON’T USE DETERGENT, AGGRESSIVE PRODUCTS OR ABRASIVE SPONGES THAT CAN DAMAGE OR SCRATCH YOUR LICENSE PLATE, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.

Improper installation could damage the electrical system of the motorcycle and cause a fire, resulting in personal injury or death. Electrical shock hazard. Disconnect the battery before starting to install turn license plate bracket or rear light or the turn signals. The pins must always be isolated and respect the polarity in the connections. The warranty is not valid for any electric wires cutting or any product modify or tampering.

INSTALATION

DISASSEMBLE ORIGINAL COMPONENTS

INSTALL PLATE FOR MEDIUM/LARGE LICENSE PLATE

INSTALL PLATE FOR SMALL LICENSE PLATE

INSTALL UNIVERAL LICENSE PLATE

INSTALL PIN OF POSITIONING

INSTALL LICENSE PLATE

INSTALL TURN SIGNALS

INSERT WIRING

INSTALL LICENSE PLATE ON CHASSIS

INSTALL COVER

ADJUSTMENT REFLECTOR MEDIUM/LARGE LICENSE PLATE

ADJUSTMENT REFLECTOR SMALL LICENSE PLATE

ELECTRIC CONNECTIONS

SAFETY WARNINGS

  • RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogues and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.
  • The action depicted is performed by professionals under strictly controlled riding conditions.
  • Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.
  • All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full-face helmet), that has been approved by ANSI , SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full-finger gloves, boots, and body armour.
  • Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle.
  • Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.

Legal notes
Some of our products may not be approved for road circulation in the countries where homologation is required. Thus RIZOMA® srl declines any responsibility for a different use of its products.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals