YAMAN YJEC1 Electric Shaver Instruction Manual
- July 2, 2024
- YAMAN
Table of Contents
YAMAN YJEC1 Electric Shaver
Specifications
- Product: Electric Shaver HOT SHAVE Skin Pro YJEC1
- Main Unit Components:
- Head (consumables)
- RF Electrode
- Triple Rotary Blades
- Ring
- Head Connector
- Open Button
- Outer Blade Inner Blade
- Mode Button
- Power Button
- Charging Indicator
- Accessories:
- Trimmer
- Head Cover
- Cleaning Brush
- AC Adapter
- User’s Manual
Product Usage Instructions
Modes
- RF Shaver Mode (recommended): For shaving while your beard is being directly warmed by RF.
- Shaver Mode: For regular shaving.
- RF Mode: For treating your skin with RF (Radio Frequency).
How to Use RF Shaver Mode (recommended)
- Apply shaving foam or shaving gel evenly to your face.
- Shave while moving the device over the skin.
- Press and hold down the power button to turn off the device.
- Clean the head after use.
Shaving Guide for Different Parts of the Face
- Cheeks: Move device in small circles.
- Under the chin: Move device against the direction of beard growth.
- Under the nose: Snap your wrist to rotate the head in small circular movements.
Important Notes
- Avoid applying the shaver too hard against the skin.
- Do not use on throat or Adam’s apple in RF Shaver Mode or RF Mode.
- Ensure there is enough shaving foam or gel for optimal performance.
- Keep charging terminal dry to prevent electric shock or malfunctions.
- Charge the device in a dry area, not in the bathroom.
- Remove makeup before using the device.
Names and Functions of Components
Accessories
- Trimmer
- Head Cover
- AC Adapter
- Cleaning Brush User’s Manual
For sideburns and under the chin.
The design and specifications of the device and attached accessories are
subject to change for improvement purposes without notice.
Modes
How to Use
RF Shaver Mode (recommended)
- Apply shaving foam or shaving gel evenly to your face
- Turn on the device
- Press and hold down the power button.
- RF Shaver Mode will be selected automatically
- Shave
- When finished, press and hold down the power button to turn off the power.
- Rinse your face Clean the head
How to shave proficiently (RF Shaver Mode/Shaver Mode)
Lightly apply the blade to your skin and move the device in a circular
motion.(Example) Cheeks: stretch your skin so that the facial hairs stand up,
then shave while moving the device in small circles.
- If you are a first-time user, it may take 2 to 3 weeks to become used to shave appropriately.
- If you use the device over makeup, the foundation may cause dark staining of the skin. ・The feeling of warmth generated by RF(Radio Frequency)depends on the type of shaving agent and skin condition at the time of use.
- Do not appy the device too hard against the skin.
- Be sure to use the product while moving it over the skin, as continually applying it to a single spot may cause burns.
- If it feels hot, move the head a little quicker.
- If you have a long beard, please trim it short using a Trimmer head before shaving with a shaving head.
Shaving guide for the different parts of the face
Stretch your skin with your free hand, so that the facial hairs stand up. Then shave while moving the device in small circles.
Move device to an upward direction as if you are lightly pushing up your chin with the head. A tip is to move the device against the direction of beard growth.
- Switch to Shaver Mode when you are shaving around an Adam’s apple.
Stretch skin under the nose. Shave with one or two rotary blades using an edge of the head. Snap your wrist to rotate the head in small circular movements
ATTENTION
- Make sure there is no water on the charging terminal before connecting the device. Failure to comply may cause an electric shock, short circuit, fire, or a malfunction of the device.
- Never charge the device in the bathroom.
- Be sure to remove makeup before using the device.
- Do not apply the shaver on the throat or Adam’s apple when using RF Shaver Mode or RF Mode.
- Always ensure there is an adequate amount of shaving foam or shaving gel between the electrodes and your skin, and add it as needed while shaving. If there is not enough shaving foam or shaving gel, warm sensation may be reduced.
- The feeling of warmth generated by RF Radio Frequency depends on the type of shaving agent and skin condition at the time of use.
- Be sure to use the product while moving it over the skin, as continually applying it to a single spot may cause burns.
- If it feels hot, move the head a little quicker.
Frequently Asked Questions (FAQ)
Q: Can I use the device without shaving foam or gel?
A: It is recommended to use shaving foam or gel for a smoother and more
comfortable shave. Without it, you may experience discomfort or reduced
performance.
Q: How often should I clean the device?
A: It is advisable to clean the device after each use to maintain optimal
hygiene and performance. Use the provided cleaning brush for thorough
cleaning.
Q: Can I use the shaver on wet skin?
A: The product is designed for dry use. Avoid using it on wet skin or in
wet conditions to prevent damage to the device or potential hazards.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>