WOEHLER SI 400 Smart Inspection Camera Instruction Manual
- July 3, 2024
- woehler
Table of Contents
WOEHLER SI 400 Smart Inspection Camera
Product Information
Specifications
- Model: P_200
- Manual Languages: EN, FR, NL, IT, DE
- Operating Conditions: Residential installation
- Compliance: FCC Part 15
Using the Smart Inspection App
- Download and install the Smart Inspection App from the respective app store.
- Pair the device with the app following the provided instructions.
- Access features such as live camera feed, recording, and settings through the app.
FAQ
Q: What should I do if there is interference during operation?
A: If interference occurs, try reorienting the device, increasing distance
from other equipment, or consulting a professional for assistance.
Complete Manual woehler international.com/P_200.dl
Operating manual
Wöhler SI 400 lower part ( unscrewed)
| 1 | Charge battery |
|---|---|
| 2 | Insert memory card |
| 3 | Switch on |
| Screw the upper part of the camera onto the lower part | |
| Screw camera onto bar |
Start screen Smart Inspection App
| Open Smart Inspection app on mobile device
---|---
4| Connect mobile device to Wöhler SI 400
| Inspect
Wöhler Technik GmbH Wöhler-Platz 1
33181 Bad Wünnenberg
Tel.: +49 2953 73-100 E-Mail: info@woehler.de
FCC
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.