FITCARE HW851 ANT Plus and BLE Heart Rate Armband User Manual
- July 3, 2024
- FITCARE
Table of Contents
FITCARE HW851 ANT Plus and BLE Heart Rate Armband
Specifications
- Product: ANT+ & BLE Heart Rate Armband
- Version: English v1.2
- Dimensions: 41.2×38.8×14.1mm
Product Introduction
Thank you for purchasing our ANT+ & BLE heart rate armband. This product
transmits real-time heart rate data through Bluetooth or ANT+ to heart rate
receiving devices and sports/health apps, aiding in scientific exercise
intensity management. Please refer to this user manual for proper usage.
Product Accessories
- Heart Rate Sensor & Armband
- Charging Cable
- User Manual
Function and Operation
Turn-on: Press the start-up button, LED light flashes blue until heart
rate is found.
Turn-off: Hold the start-up button, LED flashes red and vibrates before
shutting down.
Heart Rate Zones
| Zone | Color | Range (Default) |
|---|---|---|
| Zone 1 | Blue | Below 60% MHR |
| Zone 2 | Green | 61%~70% MHR |
| Zone 3 | Yellow | 71%~80% MHR |
| Zone 4 | Orange | 81%~90% MHR |
| Zone 5 | Red | Above 91% MHR |
FAQ
Q: How do I charge the device?
A: Use a suitable adapter with the rated voltage to charge the devie, avoiding
damage; LED indicators show charging status.
USER MANUAL
ANT+ & BLE Heart Rate Armband
Product Introduction
Thank you for purchasing our ANT+ & BLE heart rate armband, this product is one of the heart rate monitors of our company, which transmits real-time heart rate data through Bluetooth or ANT+ to heart rate receiving device, sports and health App, helping you to manage your exercise intensity scientifically. This user manual will help you to use the product better, please keep it for reference. ※(This product is for sport purposes only and it is not meant to replace any medical advice).
Product Accessories
Basic Parameters
Function and Operation
Turn-on: Press the start-up button, the LED light will flash blue quickly
until the heart rate was found.
Turn-off: Hold the start-up button, The LED will flash red light and vibrates，
then enters the shutdown state.
Heart Rate Indicating：
*Max Heart Rate (MHR) = 180 (default)
| Zone | Color | Range (Default) |
|---|---|---|
| Zone 1 | Blue | Below 60% MHR |
| Zone 2 | Green | 61%~70% MHR |
| Zone 3 | Yellow | 71%~80% MHR |
| Zone 4 | Orange | 81% ~ 90% MHR |
| Zone 5 | Red | above 91% MHR |
Power
- When charging, LED will flash green and red alternately. Green light stay on means fully charged.
- When you press the power button, if there is a red light on, the device is in a low power state and needs to be charged.
The product has a built-in battery. Do not
throw the product into a fire.Please select an adapter that meets the rated
voltage of the device to charge the device to avoid damage to the device.
Wear the Heart Rate Sensor
Wear armband on the upper portion of the forearm. sensor should be on the inside or top of forearm. It should be worn snug enough not to move on your arm, but not so tight that it restricts arm circulation.
Connection
- Compatible with most third party fitness Apps (Heartool / CoospoRide / Wahoo / Polar Beat / Wahoo RunFit)
- ANT+ connection to fitness equipment (Treadmill/ sports watch / bike computer, etc.), detailed method reference to the corresponding equipment setting instructions;
- This product Bluetooth and ANT+ transmission could work simultaneously.
Applicable models
iOS 9.0 version and above, iphone 5s and above.
Any Bluetooth 4.0 enabled Android device with Android 4.3 and above.
FCC
- The information contained in this manual just for reference. The product described above may be subject to alteration owing to the manufacturer’s continuing research and development plans, without making an announcement in advance.
- We shall not bare any legal responsibility for anydirect or indirect, accidental or special damages, losses and expenses arising from or in connection with this manual or the contained product.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, 8 may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>