Shenzhen Fitcare Electronics HW401 ANT+ BLE Heart Rate Armband User Manual
- June 4, 2024
- Shenzhen Fitcare Electronics
Table of Contents
USER MANUAL
ANT+ BLE Heart Rate Armband Version
Product Introduction
Thank you for purchasing our ANT+ & BLE heart rate armband, this product is one of the heart rate monitors of our company, which transmits the real-time heart rate data through Bluetooth or ANT+ to heart rate receiving device, sports, and health App, helping you to manage your exercise intensity scientifically. This user manual will help you to use the product better, please keep it for reference. (This product is for sports purposes only and it is not meant to replace any medical advice).
Product Accessories
Function and Operation
Turn on: Press the start-up button, and the LED light will flash blue
quickly, indicating the heart rate searching. As the heart rate has been
detected, the light will flash slowly; If the red light is on, it indicates
that the device is in a low battery state and needs to be charged.
Turn-off: Press the start-up button when not in use, the LED light will
flash red quickly, then enter the shutdown state.
Charging
4.1. Please charge the device before first time use;
4.2. Please use DC 5V power adaptor for charging;
4.3. The red and green lights flash alternately when charging, and the green
light will stay on when fully charged, and the charging can be stopped at this
time.
Connect USB DC 5V power adapter or computer USB
The product has a built-in battery. Do not throw the product into a fire. Please select an adapter that meets the rated voltage of the device to charge the device to avoid damage to the device.
Wear the Heart Rate Sensor
Wear an armband on the upper portion of the forearm. the sensor should be on
the inside or top of the forearm. It should be worn snug enough not to move on
your arm, but not so tight that it restricts arm circulation.
Heart Rate Sensor Disassembly
6.1. Press the front of the sensor to take out the sensor (Figure 1);
6.2. The sensor is aligned with the raised position and stuck into the groove
position (Figure 2).
The heart rate armband sensor could be disassembled and working alone with other accessories.It can be used in a variety of sports scenes for you to choose freely.
Initial Setup with BLE Smart Fitness Apps
Set BLE on the device to ON. Find the Sensor Settings menu in the BLE
SmartFitness App. Connect this device armband by turning it on.
7.1. Initial Setup with BLE Smart devices
(Sports Watches, Fitness Equipment & GYM Team Training System)
From the device settings menu select “Add HR sensor” Connect this device
armband by turning it on.
7.2. Compatible Apps
Heartool / CoospoRide / Wahoo / Zwift/Runtastic PRO
Applicable models
iOS 9.0 version and above, iPhone 5s and above.
Any Bluetooth 4.0 enabled Android device with Android 4.3 and above.
Basic Parameters
Product size: 35.2 x 34 x 10.9mm
Transmission: BLE & ANT+
Host weight: 7.7g
Power: Rechargeable lithium battery
Battery life: 20 hours for continuous heart rate monitoring
Water resistance: IP67
Working temperature: 0~45
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.