MICHAEL HILL Chronograph Watch Owner’s Manual

: July 2, 2024
: MICHAEL HILL

Table of Contents

MICHAEL HILL Chronograph Watch
Product Information
Product Usage Instructions
DISPLAY AND BUTTONS
SETTING THE TIME
USING THE CHRONOGRAPH
CHRONOGRAPH RESET
WARNING
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MICHAEL HILL Chronograph Watch

Product Information

Specifications:

Chronograph functionality
Display with hour, minute, and second hands
24-hour hand
Small second hand
Calendar feature

Product Usage Instructions

Display and Buttons:
Chronograph second hand, hour hand, chronograph minute hand, zero position minute hand, 24-hour hand (1st and 2nd position), normal crown position, button A, button B, small second hand, and calendar features may vary based on the watch model.

Setting the Time:

Pull the crown out to the 2nd position.
Turn the crown to set the hour and minute hands.
Push the crown back to the normal position.

Setting the Date:

Pull the crown out to the 1st position.
Turn the crown counterclockwise to set the date.
If setting the date between 9:00 PM and 3:00 AM, note that the date may not change until the following day.
Push the crown back to the normal position after setting the date.

Using the Chronograph:
The chronograph can measure and display time in 1/1 second units up to a maximum of 59 minutes and 59 seconds. The chronograph second-hand runs continuously for up to 59 minutes and 59 seconds once started.

To measure time with the chronograph:

Press button A to start and stop the chronograph.
Pressing button B resets the chronograph, returning both the chronograph second hand and minute hand to zero position.

Chronograph Reset (Including After Replacing Battery):

Pull the crown out to the 2nd position.
Press button A to set the chronograph second hand to zero position. Continuous pressing of button A advances the hand rapidly.
Return the crown to the normal position after zeroing the hands. Note not to push the crown while the chronograph hand is returning to the zero position.

Warning:

Button Battery Safety:
If swallowed or inserted into the body, button batteries can cause severe injuries. Keep them away from children and dispose of used batteries immediately. If you suspect ingestion, contact your local Poison Information Centre immediately for assistance.

FAQ:

Q: What should I do if my second chronograph second-hand does not reset to zero?
A: Follow the Chronograph Reset procedure outlined in section E of the manual.
Q: Can I wear my watch while swimming or diving?
A: Refer to your watch’s water resistance specifications. Avoid using chronograph functions underwater unless specified as water-resistant.

DISPLAY AND BUTTONS

SETTING THE TIME & DATE

SETTING THE TIME

Pull the crown out to the 2nd position.
Turn the crown to set hour and minute hands.
Push the crown back to the normal position.

SETTING THE DATE

Pull the crown out to the 1st position.
Turn the crown counterclockwise to set the date.
- If the date is set between the hours of around 9:00 PM and 3:00 AM, the date may not change the following day.
After the date has been set, push the crown back to its normal position.

USING THE CHRONOGRAPH

This chronograph can measure and display time in 1/1 second united up to a maximum of 59 minutes and 59 seconds. The chronograph second-hand keeps continuously for 59 minutes 59 seconds after starting.

Measuring time with the chronograph:

The chronograph can be started and stopped each time button “A” is pressed.
Pressing button “B” resets the chronograph and the chronograph second hand and chronograph minute hand return to zero position.

CHRONOGRAPH RESET

CHRONOGRAPH RESET (INCLUDING AFTER REPLACING BATTERY)
This procedure should be performed when the chronograph second hand does not return to zero position after the chronograph has been reset, and including after the battery has been replaced.

Pull the crown out to the 2nd position.
Press button “A” to set the chronograph second hand to the zero position. The chronograph hand can be advanced rapidly by continuously pressing the button “A”.
Once the hand have been zeroed, return the crown to the normal position.

Do not push the crown to normal position while the chronograph second-hand returns to zero position. It stops on the way when the crown is returned to its normal position and its position is recognized as zero position.

WARNING

THIS PRODUCT CONTAINS A BUTTON BATTERY
If swallowed or placed inside any part of the body, the battery can cause serious injuries. It can cause severe or fatal injuries within two hours or less. Button batteries are hazardous. Keep batteries out of reach of children. If you think the battery may have been swallowed or placed inside any part of the body, you should contact your local Poisons Information Centre immediately for 24/7 fast, expert advice.