WELLS F30 30lb Countertop Electric Fryer Owner’s Manual

June 30, 2024
WELLS

F30 30lb Countertop Electric Fryer

“`html

Product Specifications:

  • Brand: Wells
  • Model: F30
  • Type: Countertop Electric Fryer
  • Capacity: 30lb
  • Manufacturer: STAR HOLDINGS INTERNATIONAL INC.

Product Usage Instructions:

Installation:

  1. Place the countertop electric fryer on a stable, level surface
    near a power outlet.

  2. Refer to the provided wiring diagram for electrical
    connections.

  3. Ensure the fryer is properly grounded before use.

Operation:

  1. Fill the fryer with the recommended amount of oil for the
    desired food capacity.

  2. Set the temperature according to the food being fried using the
    thermostat controls.

  3. Place the food into the fryer basket and carefully lower it
    into the hot oil.

  4. Monitor the cooking process and adjust settings as needed.

Maintenance:

  1. Regularly clean the fryer basket, oil container, and exterior
    surfaces.

  2. Check and replace any worn-out parts or components as
    needed.

  3. Follow the provided care instructions for optimal performance
    and longevity.

Frequently Asked Questions (FAQ):

Q: What should I do if the fryer arrives damaged?

A: If the shipment arrives damaged, note any
visible loss or damage on the freight bill or express receipt. File
a claim for damage immediately, regardless of the extent of the
damage. For concealed damage, notify the transportation company
within fifteen (15) days from delivery and retain the container for
inspection.

“`

STAR H OLDI N GS I N T ERN AT I ON AL I N C. 10 Sunnen Dr., St. Louis, MO 63143 telephone: 314-678-6303
OWNERS MANUAL
30lb COUNTERTOP ELECTRIC FRYER
MODELS Wells
F30

Includes INSTALLATION
USE & CARE EXPLODED VIEW
PARTS LIST WIRING DIAGRAM

IL3111
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of this appliance. Additional manuals are available from your DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS APPLIANCE. Contact your dealer if you have any questions concerning installation, operation or maintenance of this equipment.

p/n 2M-Z21032 Rev. B

160718

LIMITED WARRANTY STATEMENT
Unless otherwise specified, all commercial cooking equipment manufactured by Wells Manufacturing is warranted against defects in materials and workmanship for a period of one year from the date of original installation or 18 months from the date of shipment from our factory, whichever comes first, and is for the benefit of the original purchaser only.
THIS WARRANTY IS THE COMPLETE AND ONLY WARRANTY, EXPRESSED OR IMPLIED IN LAW OR IN FACT, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, AND/OR FOR DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH WELLS MANUFACTURING PRODUCTS. This warranty is void if it is determined that, upon inspection by an authorized service agency, the equipment has been modified, misused, misapplied, improperly installed, or damaged in transit or by fire, flood or act of God. It also does not apply if the serial nameplate has been removed, or if service is performed by unauthorized

personnel. The prices charged by Wells Manufacturing for its products are based upon the limitations in this warranty. Seller’s obligation under this warranty is limited to the repair of defects without charge by a Wells Manufacturing factory authorized service agency or one of its sub-service agencies. This service will be provided on customer’s premises for non- portable models. Portable models (a device with a cord and plug) must be taken or shipped to the closest authorized service agency, transportation charges prepaid, for service. In addition to restrictions contained in this warranty, specific limitations are shown in the Service Policy and Procedure Guide. Wells Manufacturing authorized service agencies are located in principal cities. This warranty is valid in the United States and Canada and void elsewhere. Please consult your classified telephone directory, your foodservice equipment dealer or contact:
Wells Manufacturing 10 Sunnen Dr., St. Louis MO 63143 USA phone 314-678-6314 or fax 314-781-2714

SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS

1. Resetting of safety thermostats, circuit breakers, over load protectors, and/or fuse replacements are not
covered by this warranty unless warranted conditions
are the cause.
2. All problems due to operation at voltages or phase other than specified on equipment nameplates are not covered by this warranty.
Conversion to correct voltage and/or phase must be
the customer’s responsibility. 3. All problems due to electrical connections not made
in accordance with electrical code requirements and wiring diagrams supplied with the equipment are not covered by this warranty. 4. Replacement of items subject to normal wear, to include such items as knobs, light bulbs; and, normal maintenance functions including adjustments of
thermostats, adjustment of micro switches and
replacement of fuses and indicating lights are not
covered by warranty. 5. Damage to electrical cords and/or plug due to exposure
to excessive heat are not covered by this warranty.
6. Full use, care, and maintenance instructions supplied
with each machine. Noted maintenance and
preventative maintenance items, such as servicing and

cleaning schedules, are customer responsibility. Those miscellaneous adjustments noted are customer responsibility. Proper attention to preventative maintenance and scheduled maintenance procedures will prolong the life of the appliance. 7. Travel mileage is limited to sixty (60) miles from an Authorized Service Agency or one of its sub-service agencies. 8. All labor shall be performed during regular working hours. Overtime premium will be charged to the buyer. 9. All genuine Wells replacement parts are warranted for ninety (90) days from date of purchase on nonwarranty equipment. This parts warranty is limited only to replacement of the defective part(s). Any use of non-genuine Wells parts completely voids any warranty. 10. Installation, labor, and job check-outs are not considered warranty and are thus not covered by this warranty. 11. Charges incurred by delays, waiting time or operating restrictions that hinder the service technician’s ability to perform service are not covered by warranty. This includes institutional and correctional facilities.

SHIPPING DAMAGE CLAIM PROCEDURE

NOTE: For your protection, please note that equipment in this shipment was carefully inspected and packaged by skilled personnel before leaving the factory. Upon acceptance of this shipment, the transportation company assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED: 1. VISIBLE LOSS OR DAMAGE: Be certain that any
visible loss or damage is noted on the freight bill or express receipt, and that the note of loss or damage is signed by the delivery person. 2. FILE CLAIM FOR DAMAGE IMMEDIATELY: Regardless of the extent of the damage.

3. CONCEALED LOSS OR DAMAGE: if damage is unnoticed until the merchandise is unpacked, notify the transportation company or carrier immediately, and file “CONCEALED DAMAGE” claim with them. This should be done within fifteen (15) days from the date the delivery was made to you. Be sure to retain the container for inspection.
Wells Manufacturing cannot assume liability for damage or loss incurred in transit. We will, however, at your request, supply you with the necessary documents to support your claim.

xi

TABLE OF CONTENTS
WARRANTY SPECIFICATIONS FEATURES & OPERATING CONTROLS PRECAUTIONS & GENERAL INFORMATION INSTALLATION OPERATION CAUTIONS FOR ALL DEEP FAT FRYERS CARE OF FAT HANDY FRYING CHART EXPLODED VIEW & PARTS LIST WIRING DIAGRAM

xi 1 2 3 4 5, 6 7 8 9 10 – 12 13

INTRODUCTION
Proper installation, professional operation and consistent maintenance of this appliance will ensure that it gives you the very best performance and a long, economical service life. This manual contains the information needed to properly install this appliance, and to use and care for the appliance in a manner which will ensure its optimum performance.
SPECIFICATIONS

CENTERLINE OF CONDUIT CONNECTION
12″ (30.4 CM)

ELEMENT HANDEL SWINGS DOWN FOR EXTRA CLEARANCE

36 11/32″ (97.3 CM) ref.

2M-Z21032 Owners Manual for Countertop 30LB Electronic Fryer

24″ (60.9 CM)

16 3/4″ (42.5 CM)
6″ (15.2 CM)

24″ (60.9 CM)

Model Voltage

kW

F30 2402V08V 11.58.6

21 7/16″ (54.4 CM)

4″ (10.1 CM)

16″ (40.6 CM)
CENTERLINE OF CONDUIT CONNECTION

1 1/4″ (3.1 CM) 5″ (12.7 CM)
IL3112

Amps 47.451.5

Dimensions

Weight

Width Depth Height Installed Shipping

24″

24″

16.75″

69 lbs (31.3 kg)

81 lbs (36.7 kg)

1

FEATURES & OPERATING CONTROLS

(not shown, on back) Hi- Limit
Temperature Adjustment
Power & Heating Indicators
Fryer Head Latch
Basket Hanging Brackets

Fryer Head Lifting Handle
Element
Fryer Head Locking Pin

2M-Z21032 Owners Manual for Countertop 30LB Electronic Fryer

On / Off Switch

Twin 15lb Kettles

Nameplate

4″ Adjustable Feet

IL3101

Fig. 1 Countertop Electric Fryer (shown with the fryer head in the up position) 2

PRECAUTIONS AND GENERAL INFORMATION
DANGER: BURN HAZARD
Contact with cooking grid surface will cause severe burns. Use the handle to lift the grid. Avoid contact with grid surfaces.

WARNING: ELECTRIC SHOCK HAZARD
All servicing requiring access to non-insulated components must be performed by qualified service personnel. DO NOT open any access panel that requires the use of tools. Failure to heed this warning may result in severe electric shock.

This equipment is designed and sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations.

CAUTION: RISK OF DAMAGE

Before using your new equipment, read and understand all the instructions & labels associated with the unit prior to putting it into operation. Make sure all people associated with its use understand the units operation & safety before they use the unit.
All shipping containers should be checked for freight damage both visible and concealed. This unit has been tested and carefully packaged to insure delivery of your unit in perfect condition. If equipment is received in

DO NOT connect or energize this appliance until all installation instructions are read and followed. Damage to the appliance will result if these instructions are not followed.

damaged condition, either apparent or concealed, a claim must be made

with the delivering carrier.

CAUTION:

Concealed damage or loss – if damage or loss is not apparent until after

HOT SURFACE

equipment is unpacked, a request for inspection of concealed damage

Exposed surfaces can be hot

must be made with carrier within 15 days. Be certain to retain all contents to the touch and may cause

plus external and internal packaging materials for inspection. The carrier burns.

will make an inspection and will supply necessary claim forms.

Cleanliness of this appliance is essential to good sanitation. Read and follow all included cleaning instructions and schedules to ensure the safety of the food product.

Disconnect this appliance from electrical power before performing any maintenance or servicing.

DO NOT submerge this appliance in water. This appliance is not jet stream approved. DO NOT direct water jet or steam jet at this appliance, or at any control panel or wiring. DO NOT splash or pour water on, in or over any controls, control panel or wiring.

Exposed surfaces of this appliance can be hot to the touch and may cause burns.

The technical content of this manual, including any wiring diagrams,
schematics, parts breakdown illustrations and/or adjustment procedures, is intended for use by qualified technical personnel. Any procedure which requires the use of tools must be performed by a qualified technician.

This manual is considered to be a permanent part of the appliance. This manual and all supplied instructions, diagrams, schematics, parts breakdown illustrations, notices and labels must remain with the appliance if it is sold or moved to another location.

This appliance is made in the USA. Unless otherwise noted, this appliance has American sizes on all hardware.

2M-Z21032 Owners Manual for Countertop 30LB Electronic Fryer

3

INSTALLATION

NOTE: DO NOT discard the carton or other packing materials until you have inspected the appliance for hidden damage and tested it for proper operation. Refer to SHIPPING DAMAGE CLAIM PROCEDURE on the inside front cover of this manual.
CAUTION: RISK OF DAMAGE
DO NOT connect or energize this appliance until all installation instructions are read and followed. Damage to the appliance will result if these instructions are not followed.
WARNING:
Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing the equipment.
IMPORTANT:
Damage due to being connected to the wrong voltage or phase is NOT covered by warranty.

UNPACKING & INSPECTION
Carefully remove the appliance from the carton. Remove all protective plastic film, packing materials and accessories from the appliance before connecting performing any installation procedure.
Carefully read all instructions in this manual and the Installation Instruction Sheet packed with the appliance before starting any installation.
Read and understand all labels and diagrams attached to the appliance.
Carefully account for all components and accessories before discarding packing materials. Store all accessories in a convenient place for later use.
ELECTRICAL INSTALLATION
This fryer is equipped for the voltage and wattage indicated on the nameplate mounted on the bottom of the unit, just left of the power switch. It is designed for use on alternating current (AC) only. It is intended for use by properly trained personnel only.
DO NOT CONNECT TO DIRECT CURRENT (DC) The installation of the appliance should conform to the: NATIONAL ELECTRIC CODE AND ALL LOCAL ELECTRIC CODES AND ORDINANCES AND THE LOCAL ELECTRIC COMPANY RULES AND REGULATIONS
For your protection we recommend that a qualified electrician install this appliance. He should be familiar with electrical installations and all electrical codes. Proper connections and power supply are essential for efficient performance. The external wiring should be in conduit or an approved type of flexible cable suitable for operation at 194°F (90°C) and of a proper size to carry the load. The supply circuit should be properly fused and equipped with a means of disconnection, as required by local electrical code. THE BODY OF THE APPLIANCE SHOULD BE GROUNDED – DO NOT GROUND TO A GAS SUPPLY LINE. Four legs are provided and should be installed for ease of cleaning. DO NOT INSTALL WITHOUT FEET PROVIDED. Level unit by adjusting the (4) feet which have an adjustment of 1-3/8″ (34.92 mm) for accurate leveling and perfect line-up with other units.
POWER SUPPLY These models are wired at the factory for operation on a single phase power supply. For specific wiring, check the wiring diagram.

2M-Z21032 Owners Manual for Countertop 30LB Electronic Fryer

4

OPERATION

OPERATING INSTRUCTIONS
PLACE THE LAMINATED WARNING SIGN SUPPLIED WITH THE FRYER IN AN AREA VISIBLE TO THE FRYER OPERATOR.
CLEAN KETTLE BEFORE USING Take out baskets, push and hold element catch, lift up on element lift handle until elements lock in a vertical position, and remove kettles. The kettles can be cleaned in a sink like any other pot or container.
ADDING FAT Replace kettle and swing the element down, making fryer ready for use. Add fat. Each kettle has a 15 lb. fat capacity. A fat level line on the rear of the kettle will guide you in determining the minimum cold fat level. A higher fat level can be used when frying bulky foods, such as chicken or fish cakes. The fat level should be chosen carefully so that the foaming action of the fat does not spill out of the kettle. If solid shortening is used, pack carefully around the elements.
CONTROLS
1. ON/OFF TWO-POLE SWITCH – Located on the front panel is a twopole switch which turns power on or off. An indicator light (Power On) is located on the control housing.
2. THERMOSTAT CONTROL – Located on the Control Housing, this control allows you to select the desired frying temperature. A signal light “Heating” indicates when the element is on. When the light goes off, the desired temperature has been reached.
3. HI-LIMIT THERMOSTAT – Should fat temperatures reach 450° F (230° C), this control will shut off the power to the heating elements. The unit will still have power. The fat temperature must cool to 400° F (202.4° C) and the manual reset button located on the back panel of the control housing must be pressed to restore operation. Should the hi-limit control activate twice in succession, the primary thermostat should be checked for malfunction by a qualified service technician. Each pot is equipped with its own HI-LIMIT THERMOSTAT.

CAUTION: RISK OF DAMAGE
DO NOT connect or energize this appliance until all installation instructions are read and followed. Damage to the appliance will result if these instructions are not followed.
CAUTION: HOT SURFACE
Exposed surfaces can be hot to the touch and may cause burns.
CAUTION: HOT SURFACE
Exposed surfaces can be hot to the touch and may cause burns.

2M-Z21032 Owners Manual for Countertop 30LB Electronic Fryer

5

OPERATION continued

CAUTION: HOT SURFACE
DO NOT ATTEMPT TO REMOVE THE KETTLE FILLED WITH HOT OIL. CONTACTING HOT OIL CAN RESULT IN SEVERE INJURIES OR DEATH
CAUTION

FRYING After fat has been added, turn the switch on and set the thermostat at 200°F (92.4° C). After the fat has melted, turn the thermostat to the desired setting. Included in this instruction booklet is a frying chart and some helpful hints on fat use. After the selected fat temperature has been reached, slowly lower half filled baskets into the fat. Do not overload baskets as this causes foods to be improperly fried.
NOTE: Baskets should be allowed to drain after frying cycle. The kettle handles serve as basket hangers.
IDLING During idle periods turn thermostat control to approximately 200° F (92.4° C). The fast recovery fryers can be brought up to frying temperature in a matter of minutes. Lowering the temperature during idle periods saves energy costs and prolongs fat life.
DRAINING KETTLE Turn switch to “OFF”. Raise element to the first stop and allow to drain. Raise the element to the vertical position and siphon the oil out of the kettle. Once drained, the kettle can be washed out with warm water and wiped dry before returning it to the unit.. DO NOT use soap when cleaning the kettle, it will discolor the kettle.
If kettle needs further cleaning, contact your dealer for product specific to cleaning fryer kettles. Follow the directions provided with that specific cleaner.
DO NOT ATTEMPT TO REMOVE THE KETTLE FILLED WITH HOT OIL. CONTACTING HOT OIL CAN RESULT IN SEVERE INJURIES OR DEATH.
If you do not have a siphon, order one from your dealer or dip the oil out and strain into a container. After oil has been removed, remove the kettle and clean.
INAPPROPRIATE USE DUE TO A LACK OF COMMON SENSE MAY RESULT IN PRODUCT DAMAGE OR PERSONAL INJURY.

CLEANING THE EXTERIOR The exterior surfaces can be cleaned by regularly wiping with a soft cloth. Any discoloration can be removed with a non-abrasive cleaner.

2M-Z21032 Owners Manual for Countertop 30LB Electronic Fryer

6

CAU T I ON S FOR ALL DEEP FAT FRY ERS
NEVER LEAVE AN OPERATING FRYER UNATTENDED
REMEMBER HOT OIL IS DANGEROUS ­ RESPECT I T !

2M-Z21032 Owners Manual for Countertop 30LB Electronic Fryer

WARNING ­ INSTALLATION
· Locate your fryer in a protected place so that it cannot be tipped over or knocked off its support. A mechanical restraint should be installed to prohibit the fryer from tipping or moving. Consult your local codes for allowable methods of restraint.
· Install an automatic fire extinguisher over the fryer and in the exhaust duct.
· Be sure your power supply is installed properly and in accordance with the local and national codes.
· Install a shut-off switch or gas valve close to the fryer. It must turn off the fryer immediately.
· Failure to add a mechanical restraint can result in oil splashing out and contacting the skin, leading to serious injury or death!
WARNING ­ HOT OIL
· Hot oil is dangerous ­ Severe burns can result when hot oil contacts the skin.
· Hot oil is flammable ­ Keep open flames away from hot oil and its vapors.
· Never allow water or ice to get in hot oil. IT CAN EXPLODE!
WARNING – ENVIRONMENT
· Keep your floors clean and free of grease and all other substances so no one slips accidentally and contacts the hot fryer.
· Keep areas and filters clean above your fryers ­ Oil soiled lint or dust can ignite easily and flames will spread rapidly.

WARNING ­ MAINTENANCE
· Have your equipment checked regularly to insure its safe and properly functioning.
· If your fryer starts to smoke or boil abnormally, cut off the power supply immediately and determine the reason for the smoking or boiling before attempting to use it again.
WARNING ­ TRAINING
· Train all personnel to understand the hazards of hot oil. Instruct them on the proper action to take if something does not seem to be acting properly.
· Instruct your personnel on what to do if there is an oil fire. Do not use water on an oil fire! Use only fire extinguishers of the approved type and never direct such extinguishers so as to blow the oil out of the oil container.
· Inappropriate use due to a lack of common sense may result in product damage or personal injury.

7

CARE OF FAT
In three to six months you may spend as much for fat as you paid for your kettle. So fat is an item you want to know all about; how to select it; how to manage it. The more production you can get from each pound of fat, the more profitable your frying operation will be.

10 POINT PROGRAM TO PRESERVE FAT AND PRODUCE THE FINEST FRIED
FOODS
1. Choose a fat that does not break down quickly. Hydrogenated shortening, corn, and peanut oils are less likely to break down under high temperatures.

To get a high rate of production per pound of fat you have to avoid two things. One is early breakdown and spoilage of the compound so that you have to throw it away before it does enough work to “earn its keep.” The other is excessive sponging up of fat by the food being fried.

2. Do not fry foods at temperatures above those recommended. The higher the fat temperature, the more rapid the rate of fat deterioration. Above 400°F fats quickly deteriorate.

The main cause of fat breakdown is excessive heat. On the other hand abnormal absorption is caused by frying too long at too low temperatures. One answer to both problems is exact control of heat — so that fat neither smokes up nor soaks up.
Of course, no fat “keeps” forever. Not only heat, but air and moisture, salt particles and crumbs of food work to break it down. But you can slow up fat deterioration by maintaining proper temperatures and by draining your kettle, filtering or straining the fat once or twice a day and by keeping the kettle itself absolutely clean.
A number of commercial devices and materials are available to aid in eliminating fat impurities. There are several excellent models of pressure filters as well as strainer-type filters, which, if used regularly, will prolong life of fat.

3. During short intervals between frying, turn the heat down. Do not keep heat on for long periods between batches.
4. Keep fat clean. Strain or filter daily or at end of each shift. Add at least 15% fresh fat to your kettle daily.
5. At least once a day, cool a small amount of fat and taste it to see if it has picked up foreign flavors.
6. Discard fat that tends to bubble excessively before food is added.
7. Do not overload baskets-pieces should not touch when frying. Shake baskets to prevent food from sticking together. Fry similar sizes together.

However, no purification device will renew broken down or rancid fat or put new life into it. Once you
have allowed fat to break down it becomes unsuitable for frying — in fact browning is impossible.

8. Never salt foods directly over fat, salt in fat reduces its life.

In addition to filtration, you can prolong the usefulness of fat by sweetening it with fresh compound every day
– replacing about 15% of the bulk you started with. If you do enough frying so that normal absorption of fat
in food amounts to 15% to 20% of the capacity of your kettle every day – then you can call that your turn-over food. It means you can add the recommended 15% of fresh fat without discarding any of the old.

9. Raw, wet foods, such as potatoes and oysters, should be drained or wiped dry before frying to extend the life of the frying fat. Have foods to be fried at room temperature.
10. Keep fat temperatures below smoking point to minimize frying odors.

2M-Z21032 Owners Manual for Countertop 30LB Electronic Fryer

8

FOOD
Standard French Fries Blanch Only Brown Only Long Branch Julienne (shoe string) Chips
Large Pieces Small Pieces Pre-cooked
Fillets (Large) Fillets (Small)
Oysters
Clams Scallops Shrimp Smelts
Chicken Fried Steak Cutlets Chops Meat Balls Brains
Asparagus Cauliflower Egg Plant Onions
Fruit (bananas, pineapples, apricots, berries) Corn Vegetable (peas, green beans)
Croquettes Chinese Noodles French Toast
Cake Yeast, raised

COATING

HANDY FRYING CHART
PROCEDURE
POTATOES Cut in uniform pieces 1/2″ square the long way

Batter or Breading
Breading or Batter Breading or Batter Batter Breading Batter Breading
Breading Breading Breading Breading or rolled in flour Breading
Batter or crumbs Batter or crumbs Crumb Breading Light batter
Batter
Breading

Cut in uniform pieces 3/4″ square the long way Cut in uniform pieces 1/8″ to 1/4″ square the long way Soak in cold running water until water does not run milky
CHICKEN Some prefer rolling in seasoned flour, dipping in egg wash, and frying
FISH Select fillets of uniform size, skin out and dry. Use Oyster liquor in batter or breading
Some prefer soaking 1/2 hour in cold seasoned milk Cut spinal cord several
MEATS Sever all connecting membranes at one inch intervals to prevent curling
VEGETABLES Pre-cook in salted water Pre-cook and separate flowers Peel, cut cross-wise into 1/4″ slices Slice thin, soak in milk for two hours
FRITTERS Serve with fruit juice Serve with syrup or jelly Serve with tomato cheese sauce
MISCELLANEOUS

DOUGHNUTS

TEMP MINUTES

350°

5-7

350°

3-1/2

350°

3-1/2

350°

7-10

350°

3-6

350°

2-3

325°

9-1l

340°

7-10

350°

3-4

350°

4

350°

3

350°

5

350°

5

350°

1

350°

4

350°

3

350°

4

360°

3-4

350°

3-4

340°

3-4

340°

4-6

340°

3-5

350°

3

350°

3

350°

3

350°

3

350°

3-5

350°

3-5

350°

5-8

360°

3

375°

1-2

375°

1

375° 1-1/2 – 2

375°

1

2M-Z21032 Owners Manual for Countertop 30LB Electronic Fryer

9

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals