FERRIDA 3MG380 Electric Grass Lawn Mower User Manual

: June 9, 2024
: FERRIDA

FERRIDA 3MG380 Electric Grass Lawn Mower

3MG380 Electric Grass Lawn Mower

SAFETY INSTRUCTIONS

IMPORTANT SAFETY SYMBOLS AND ACTIONS:

In this manual and/or on the machine, the following symbols appear, and it is necessary to take the following safety measures:

| Warning: Electrical hazard. Keep the movable power cord out of contact with the mower.
---|---
| Attention: Read this user manual carefully.
| Avoid contact with the sharp blades. The blades rotate even after the motor is shut off. Pull the plug from the power socket before performing maintenance or if the movable power cord is damaged.
| Injury hazard from flying foreign objects. Stay a safe distance away from bystanders.
| Before handling the garden equipment, wait until all rotating parts have stopped, especially the blades. The garden equipment’s blades rotate even after the motor is shut off and they can cause severe injury
| Wear safety glasses.
| Do not use the product in or expose the product to rain.
| Equipment protection class II.

IMPORTANT READ CAREFULLY BEFORE USE. SAVE FOR LATER REFERENCE.

Safe operation instructions for electric lawnmower

This mower is intended for home use. It is designed for cutting grass.
Before starting the mower, make sure that you have removed the protective covers from the
mower blades, the labels or other advertising material.
Power the mower only from a circuit protected by a circuit breaker with maximum tripping current of 30 mA.
Before inserting the power plug into the extension cord socket, make sure that your electrical socket’s voltage corresponds to that indicated on the mower’s type plate.
Never use an extension cord that is damaged or worn. This poses a risk of electric shock.
When operating the mower, always check the location of the extension cord. Always attach the extension cord using the included holder.
Never use the mower in rain or high humidity.

Operator

Read the instructions carefully. Familiarize yourself with the controls and proper use of the machine. Store the instructions in a safe place for future reference. If you give or sell the mower to another person, always hand over this user manual with the mower.
Never allow children or people who don’t know these instructions to use the mower. Local regulations may limit the age of the operator.
Never allow the mower to be used by people with limited physical, sensory or mental capacities, or a lack of knowledge and experience, unless they are supervised or trained to use the product in a safe manner and understand the hazards. Local regulations may limit the age of the operator.
Children must not play with the mower.
Never work with the mower when people, especially children, or pets are nearby.
Remember that the operator or user is responsible for accidents or hazards that occur to other people or their property.

Preparation

When working with the mower, always wear work shoes and long trousers. Never work with the mower barefoot or in open sandals. Never wear clothing that freely flaps or has hanging cords, and never wear a necktie.
Carefully look over the area where the mower will be used and remove all objects the machine may throw off.
Before use, always visually check that the blades, blade screws and the set of knife parts are not worn or damaged. Replace the whole set of worn or damaged parts to maintain balance. Replace damaged or illegible labels.
Before use, check the power supply and extension cord for signs of damage or ageing. If the cord gets damaged during use, immediately unplug it from the power supply. NEVER TOUCH THE CORD BEFORE UNPLUGGING IT FROM THE POWER SOURCE. Never use the mower if the cord is damaged or worn.

Operation

Work with the mower only in daylight or under good artificial light.
Do not use the mower on wet grass.
Always make sure you’ve got good footing on slopes.
Walk — don’t run.
Mow across a slope, not up and down.
Move extremely carefully if you are changing direction on a slope.
Don’t mow on slopes that are too steep.
Take extra care when turning around or pulling the mower toward you.
Stop the blade(s) if the mower has to tilt when crossing a surface other than grass, and if you are moving the mower to or from the mowing location.
Never use a mower that has damaged safety covers or does not have the safety equipment installed, such as the deflectors and/or collection bag.
Turn the motor on carefully in keeping with the user manual, and stand far enough from the blade(s).
Do not tilt the mower when starting the motor, except if the mower must tilt when starting. In this case, do not tilt it more than necessary and lift only the part that is away from the operator.
Do not start the mower if you are standing in front of the ejection port. · Never put hands or feet near or below rotating parts. Never stand in front of the ejection port.
Do not carry the mower if the motor is running.
Stop the mower and pull the plug from the socket. Make sure that all moving parts have completely stopped whenever you walk away from the mower, before cleaning a clogged channel, before inspection, cleaning or work with the mower, and after running over a foreign object. Check whether the mower has become damaged, and repair it before operating it again.
Stop the mower and pull the plug from the socket. Make sure that all moving parts have completely stopped if the mower starts vibrating too much (check immediately): Look for damage, replace or repair all damaged parts, and check tightness of all loosened parts.

Maintenance and storage

Always make sure all nuts and screws have been firmly tightened, and make sure the mower is in good operating condition.
Regularly check the collection bag for wear or damage.
When adjusting the mower, be careful not to get fingers caught between the moving blades and the fixed parts of the mower.
Before storing, always let the mower cool down.
If you repair the blades, remember that, even when the electricity source is turned off, the blades can still move. Therefore, always wait for the blades to come to a full stop.
For safety reasons, replace worn or damaged parts. Use only original replacement parts and accessories.

TECHNICAL PARAMETERS

Nominal voltage and frequency	220–240 V ~ 50 Hz
Input power	1,600 W
No-load RPM	2,800 rpm
Weight	17.2 kg
Dimensions	length 105 cm, width 47 cm, height 110 cm
Adjusting the cutting height	28–68 mm
Cutting width	380 mm
Collection bag capacity	50 l
Sound pressure level L pA	81.2 dB (A)
Sound power level L wA	93 dB (A)
Vibration level (Aw)	Max. 1.155 m/s2

OVERVIEW

Overview

Switch block contains the mower on/off switch; switch lever and power cord plug
Upper handle
Cable clamps
Lower handle
Motor cover
Extension cord holder
Handle mounting nuts
Collection bag cover
Collection bag
Screw
Wheel covers
Mower body
Wheels
Front wheel axle
Cutting height adjustment lever
Cutting blade
Fastening screw for cutting blades
Rear wheel axle
Switch lever

Overview

USE

Assembling the mower

Remove the mower and all accessories from the packaging. The mower comes from the factory disassembled. Check whether you have all accessories needed to assemble the mower:

Lower and upper part of handle
2 fastening screws for lower part of handle
2 fastening nuts 2 screws and
2 washers for fastening the upper part of the handle
2 cable clips Holder for extension cord (already mounted on the upper part of the handle)

Handle

Insert the lower handle into the hole in the upper part of the mower (Fig. 1) and secure it with the screws.
Attach the upper handle to the lower handle and use the handle screws, washers and fastening nuts to tighten (Fig. 2).
Attach the power cable between the switch block and the motor to the handle using the clips. It is important that the power cable be safely clipped to the handle to prevent dangerous situations from occurring.

Collection bag

The collection bag is made up of two parts: an upper and a lower one.
Place the lower part on a firm pad or floor.
From above, attach the upper part such that the protrusions in the lower part are flush with the holes in the upper part. Gently press the upper part so that the protrusions go through the holes. Clicking means they are properly secured (Fig. 3).
Before use, make sure that all protrusions of the lower part are firmly inserted into the holes in the upper part.

Preparing the mower before turning it on

Before each time the mower is turned on, it is important to attach the collection bag and set the cutting height.

Warning: Before attaching the collection bag and setting the cutting height, always make sure that the mower is turned off and disconnected from the power source, and that the blade has completely stopped!

Attaching the collection bag

With one hand, lift the collection bag cover.
Use the other hand to grab the collection bag by the handle and attach the bag to the hitches in the mower body (Fig. 4).
Carefully place the cover on the collection bag.
Make sure the collection bag is properly placed against the mower body and does not move or tilt.

Adjusting the cutting height

You can set the cutting height to any of five levels.
Grab the lever and move it up or down to set the desired cutting height.
Secure the lever in the groove.

Note: If you need to change the height while mowing, first always turn off the mower, unplug it from the power source and wait for the cutting blade to completely stop.

Turning the mower on/off

Fully unwind the extension cord and insert the plug into the extension cord socket. Connect the extension cord plug to a properly earthed power outlet.

Attention: Power the mower only from a circuit protected by a circuit breaker with maximum tripping current of 30 mA.

· With one hand, press the on/off switch. · With the other hand, pull the switch lever toward the handle, and the mower will start. · Let up on the on/off switch. · It is important to hold the switch lever to the handle during the mowing process. · As soon as you let up on the switch lever, the mower automatically shuts off.

Mowing

Warning: Do not overload the mower. Let the mower run at an easy speed.

During mowing, we recommend following these instructions:
Lay the extension cord as close as possible to the place where you start mowing.
Turn on the mower and wait for the cutting blade to start turning.
Gently push the mower ahead of you and go in rows from the starting point.

Warning: Constantly pay attention to where the extension cord is. Never guide the mower toward the extension cord.

As soon as the collection bag is full, turn off the mower, and disconnect the power cable plug from the extension cord. Wait for the cutting blade to completely stop.
With one hand, grab the collection bag by the handle, and with the other, lift the collection bag cover.
Lift the collection bag to release it from the hitches in the mower body.
Empty the collection bag and put it back on. Follow the instructions above in the section “Atta- ching the collection bag”.
Plug the power cord plug into the socket of the extension cord, turn on the mower and continue cutting.

Warning: Always turn off the mower, remove the power cable plug from the extension cord socket, and wait for the cutting blade to completely stop if you are going to empty the collection bag, remove an object from the mowing location, transfer the mower or move it to a different mowing location, or leave the mower without supervision or in a similar situation where you won’t have full control of the mower.

Recommendation: For optimum results, mow dry grass.If the grass is taller than 10 cm, we recommend mowing twice, first at the highest cutting height, and then at a medium or low cutting height.

As soon as you finish mowing, release the switch lever, turn off the mower, remove the power cable plug from the extension cord socket, and wait for the cutting blade to completely stop Empty the collection bag and clean the mower according to the instructions in the “Service and maintenance” section.

SERVICE AND MAINTENANCE

Warning: Before performing any maintenance or service, always turn off the mower, remove the power cable plug from the extension cord socket, and wait for the cutting blade to completely stop. Wear safety gloves.

Regular maintenance

Clean the mower after every use. It is important to keep the mower clean to prevent hazards and extend its service life.
Empty the collection bag and remove remaining grass from the walls of the bag. If necessary, you can rinse out the collection bag with running water. Give it time to dry out.
Wipe the outer surface of the mower with a clean cloth previously moistened with warm water and a little detergent.

Warning: Prevent water from getting into the motor compartment.
For cleaning, never use aggressive cleaning products, petrol or solvents.

Lay the mower on its side and remove remaining grass from the blade and the inner walls of the mower.

Warning: When removing remaining grass from inside the mower, be careful not to hurt yourself on the blade.
The blades are very sharp and pose a severe injury risk if handled improperly.

Let the mower dry and then put it in a dry, well-ventilated place.

Warning: Never clean the mower (other than the collection bag) with flowing water or pressure cleaners.

Recommendation: To remove remaining grass, you can use a flow of air under low compression.

Maintaining the cutting blades

Regularly check the condition of the cutting blade. If the blade is damaged, absolutely do not use the mower, and have the blade replaced. We recommend that only a qualified person replace the blade. Always use only an original cutting blade specified by the manufacturer.

Warning: Always make sure the cutting blade has completely stopped and the power cable is unplugged from the extension cord socket. Be especially careful not to injure yourself when handling the blade. When handling the blade, it is necessary to wear work gloves.

WARNING: NEVER USE A MOWER WITH A DAMAGED CUTTING BLADE.

If the mowing results are not satisfactory, the grass is not smoothly cut, the blade is probably dull and needs to be sharpened.
Put on safety gloves and carefully lay the mower on its side.
With one hand, grab the blade, and with the other hand use a wrench to loosen the cutting bla-
de’s screw (Fig. 5).
Carefully remove the blade and clamp it in a vice. · Always sharpen the ends of the knife and proceed uniformly and evenly when honing (Fig. 6).
Check that the blade is balanced by inserting a screwdriver into the blade’s centre hole and waiting until the blade stops moving (Fig. 7). If the blade is even, it is properly balanced. If it leans to one side or the other, it will be necessary to hone the side that is heavier (below).

Warning: Always check that the blade is balanced. A poorly balanced cutting blade can cause excessive vibration and damage the mower.

Attach the sharpened cutting blade to the central shaft and fasten the blade with the screw. Make sure it is properly tightened.

Note: Before each use, check that the cutting blade is tight.

ENTRUST MAINTENANCE NOT DESCRIBED ABOVE ONLY TO AN AUTHORIZED SERVICE. THIS MOWER CONTAINS NO COMPONENTS THAT REQUIRE MORE MAINTENANCE THAN THE USER CAN PERFORM HIMSELF.

Storing the mower

Make sure the mower is clean. Put it in a dry, well-ventilated place secure from children or other people who are not authorized to use the mower.

SOLUTION

Before repairing any problem, first turn the mower off and unplug the power cable from the extension cord.

Problem	Solution
Mower doesn’t turn on.	Check the connection of the extension cord and socket.

Check the circuit breaker in the house.
Mower suddenly stops.| Check the connection of the extension cord and socket.
Check the electrical connection.
Check the extension cord or replace the socket.
Check the main circuit breaker in the house.
Increase the cutting height.
Make sure the grass discharge isn’t clogged.
The collection bag doesn’t fill with grass.| Adjust the cutting height.
Make sure the grass isn’t too dense and heavy.
Make sure the grass isn’t wet.
Unsatisfactory mowing results.| Adjust the cutting height.
The cutting blade needs to be sharpened.

If the problem could not be solved and persists, or your problem is not listed in the chart above, contact an authorized service centre.

EU DECLARATION OF CONFORMITY

Identification data on the manufacturer/importer’s authorized representative: Manufacturer: Alza.cz, a. s.
Registered headquarters: Jankovcova 1522/53, Holesovice, 170 00 Prague 7, Czech Republic Org. ID: 27082440

Subject of declaration:
Name: Electric mower Model/type:
LM 3816/M1G-ZP3-380

The product indicated above has been tested and conforms to the standard(s) used for demonstrating compliance with the basic requirements specified in the directives:
2006/42/EC
2000/14/EC as amended by 2005/88/EC
2014/30/EU
2011/65/EU as amended by 2015/863/EU

Reference to harmonized standards:
EN 60335-1:2021+A11+A13+A1+A14+A2
EN 60335-2-77:2010
EN 55014-1:2017+A11
EN 55014-2:2015
EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1

EC type examination was conducted at:
No. 0197; Test facility: TÜV Rheinland LGA Products GmbH, Tillystraße 2 – 90431 Nuremberg, Germany
Certificate No.: S 50511496

Technical documentation is stored at:
Alza.cz, a. s.
Jankovcova 1522/53, Holešovice, 170 00 Prague 7, Czech Republic
The production year and serial number are shown on the machine.

Ing. Jan Melena
Business Development Manager
Sales and Purchasing; Private Labels

In Prague, this day of 1. 3. 2022

WARRANTY & SUPPORT

Your new product is protected by our 24-month warranty, or extended warranty (if stated), which you can apply at any of our points of sale. For inquiries, you can use the contact form or one of our international call centres.

This product meets all of the related basic EU regulation requirements. The EU declaration of conformity is available on www.alzashop.com/DoC.
This product sold in the European Union meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS). The use of the WEEE Symbol indicates that this product should not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment.
For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider, or the shop where you purchased the item.

www.alzapower.com

Co. Reg. No. 27082440
Alza.cz a.s., Jankovcova 1522/53, 170 00 Prague 7, Czech Republic
© 2021 Alza.cz a.s. All Rights Reserved

Documents / Resources

| FERRIDA 3MG380 Electric Grass Lawn Mower [pdf] User Manual
3MG380 Electric Grass Lawn Mower, 3MG380, Electric Grass Lawn Mower, Grass Lawn Mower, Lawn Mower
---|---