Allflex APR450 Reader User Guide
- October 30, 2023
- Allflex
Table of Contents
Allflex APR450 Reader
The Allflex APR450 Reader is made to read livestock electronic identification Tags (EID) that offer simple-to-use essential reading and management capabilities and delivers outstanding value even for small farms.
Getting Started
Battery Charge
The device should be fully charged before the first use.
To charge, use the provided Magnetic-USB power source.
Connecting the USB cable:
The magnetized connectors “find” the proper orientation almost automatically
by attracting each other in the appropriate order.
Note: DO NOT FORCE a connection to the reader. If it does not insert
smoothly, verify that it is correctly oriented.
Charging is complete if no bars are flashing anymore
To disconnect, pull the connector away from the device
When fully charged, the battery info will show ‘100%,’ and you can see a rough
estimation for operating time in Standby Mode and continuous Read Mode.
Initial Configuration
Set Language :
The default display language will be English at first start-up. You can change
the language by accessing the menu, going to “setup,” and choosing “set
language.” Navigating the options using the direction keys, you can then
select your language preference by pressing ENTER.
Set Read mode :
By default, the reader is set to ‘Single Read’- one scan click per animal.
Choosing the ‘Continuous mode’ enables batch reading.
Device Properties
Multi-Color Status Led
The color changes according to the charging status when the display is
switched of
Blue Status Led
Used to indicate the connection status when the display is switched of
Display
Keypad
NOTE : Press the down button key for >2 seconds to switch off the device
Quick Reading Steps
Reading EID Tags:
-
Press ENTER to Read
-
Scan the EID tag near the field lines of the reader
-
The device’s RGB LED signal will turn on, as well as the signalization motors (sound and vibration)
-
The tag will be shown on the display screen when successfully read
-
A ‘No Tag’ message will appear on the screen if the reading fails
Assigning Tags
-
At the home display, press the New Group button
-
Insert Group Name using the direction keys to navigate the letters, numbers, or symbols
-
When finished, press ‘Close’ to exit the keyboard, and confirm the name by pressing ENTER.
-
To assign tags to the group created, enter the group and start reading.
NOTE : After 10.000 records within one group, the device will force the user to create a new group
What is in the Box
ATB400 – Transport box
