Pioneer BDP-320 Blu Ray Disc Players Instruction Manual

BDP-320 Blu Ray Disc Players

“`html

Product Information

Specifications:

• Product Name: Pioneer DMH-WT3800NEX In-Dash AV Receiver
• Country of Sale: United States and Canada

Product Usage Instructions

Checking the Firmware Version:

1. Swipe toward left on Home Screen to switch to Source list
   page.

2. Select Setting icon on source list page.

3. Scroll down the list and touch [System Information].

4. Touch [Firmware information].

5. Check the firmware version number and model name on the
   Firmware Information screen.

Downloading the Firmware Update Files:

1. Download the firmware update files from Pioneer’s website by
   visiting here.

2. Extract the downloaded zip file to get the update file named
   DMH-WT3800NEX.avh with version 1.56.

Updating the Firmware:

1. Connect a blank (formatted) USB storage device to your computer
   and copy the update file onto it.

2. Connect the USB storage device to the USB port of the
   unit.

3. Set the audio source to OFF on your unit.

4. Swipe toward left on Home Screen to switch to Source list
   page.

5. Select Setting icon on source list page.

6. Scroll down and touch [System Information].

7. Touch [Firmware Update], then select [USB].

8. Touch [Continue] to start the data transfer mode.

9. Read the warning and touch [Start] to initiate the update
   process.

10. Wait for the update progress to complete. Do not turn off the
    unit or eject the USB device during this time.

11. The display will show “It succeeded…” when the update is
    finished.

12. The product will reboot automatically. Do not interact until
    the menu screen appears.

Frequently Asked Questions (FAQ)

Q: Can I perform the firmware update while driving?

A: No, it is recommended to install updates only when the
vehicle is safely parked in an open, well-ventilated area.

Q: What should I do if I encounter an error during the update

process?

A: If an error occurs, try using another USB storage device for
the update.

“`

System Firmware Update Instructions for Pioneer DMH-WT3800NEX In-Dash AV Receivers
This firmware update applies only to the Pioneer DMH-WT3800NEX In-Dash AV Receivers sold in the United States and Canada.
IMPORTANT Please download and print these firmware update instructions before downloading and installing the firmware update. It is important that you complete all steps correctly and in the order described below.
Note: If you have any questions, please contact Pioneer Customer Service toll free at 1-800-421-1404, Monday through Friday, 7:30 AM – 11:30 AM and 12:30 PM – 4:00 PM (Pacific Time), excluding holidays, or by email through parts.pioneerelectronics.com/contact.
In order to perform this update, the following items are needed: · Pioneer In- Dash AV receiver listed above. · A USB storage device meeting the following requirements: – 512 MB or larger in capacity, formatted to FAT32 or NTFS – Blank (should not contain any files)
CAUTION · DO NOT turn your unit off or eject the USB storage device while the firmware is being updated. · You can only update the firmware when the vehicle is stopped and the parking brake is engaged.
WARNING: Install this update only when the vehicle is safely parked in an open, well-ventilated area, such as an outdoor parking lot, where you can safely keep the engine running to maintain power to the battery. NEVER RUN YOUR VEHICLE’S ENGINE IN AN ENCLOSED SPACE, WHICH CAN QUICKLY FILL UP WITH TOXIC CARBON MONOXIDE GAS, LEADING TO SERIOUS INJURY OR DEATH.

Checking the firmware version
Check whether the firmware of your unit needs to be updated by checking the version number of the firmware. Procedure:
1. Swipe toward left on Home Screen to switch to Source list page.
Swipe
2. Select “Setting” icon on source list page.
3. Scroll down the list and touch [System Information].

4. Touch [Firmware information].

5. After the “Firmware Information” screen appears, Check the firmware version number and model name.

Downloading the firmware update files from Pioneer’s website

1. Download the firmware update files by clicking on the following link and finding your product: https://www.pioneerelectronics.com/PUSA/Support/Downloads
2. Extract the download file. The downloaded zip file will produce the following file when decompressed: (See the table below)

Model Name

Update is necessary when

Current version is Lower than DMH-WT3800NEX
1.56

File Name DMH-WT3800NEX.avh

Version 1.56

Updating the firmware on your unit
IMPORTANT
· DO NOT perform this firmware update if the model number of your Pioneer product is anything other than DMH-WT3800NEX.
· Ensure that the update file is located within the root (top) folder of your USB storage device. There should be no other files within the USB storage device.
· While your unit is being updated, DO NOT turn off the system’s power and DO NOT touch the unit’s touchscreen as this may result in severe damage to your unit.
· DO NOT remove the USB storage device during the firmware update process. · Performing the firmware update will restore all settings to their default values. · Disconnect any external mobile devices that are currently connected to your unit.
Procedure: 1. Connect a blank (formatted) USB storage device to your computer, and then locate the correct update file and copy it onto the USB storage device. 2. Connect the USB storage device to the USB port. 3. Set the audio source to “OFF” on your unit. 4. Swipe toward left on Home Screen to switch to Source list page.
Swipe

5. Select “Setting” icon on source list page. 6. Scroll down the list and touch [System Information] 7. Touch [Firmware Update]. The “Firmware Update” screen appears.

8. Touch [USB]. 9. Touch [Continue] to display the data transfer mode.
It will take several minutes to load, so please wait.

10. Read the “WARNING,” then touch the [Start] button to start the update process. If it shows “ERROR” on the display, try another USB device.
Version up will start. 11. The progress is displayed during the updating.
DO NOT turn your unit off or eject the USB storage device while the firmware is being updated. 12. Display will show “It succeeded…” when the update is complete.
Please disconnect the USB storage device.

13. The product will reboot after the update is finished. Do not touch anything even when the screen is blacked out. After it has finished rebooting, the screen will return to the menu screen.
14. The firmware update is now complete.
Confirm that the firmware has been updated
Perform the same procedure for “Displaying the firmware version” to confirm that the firmware has been updated. Procedure:
1. Swipe toward left on Home Screen to switch to Source list page. Swipe

2. Select “Setting” icon on source list page. 3. Scroll down the list and touch [System Information]. 4. Touch [Firmware information].

5. After the “Firmware Information” screen appears, Check the firmware version number and model name.
If you have any difficulty performing these instructions, please contact Pioneer Customer Service toll free at 1-800-421-1404, Monday through Friday, 7:30 AM – 11:30 AM and 12:30 PM – 4:00 PM (Pacific Time), excluding holidays, or online through parts.pioneerelectronics.com/contact. ———————————————————–Copyright 2024 Pioneer Corporation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>