OVLENG FF93 Bluetooth Headset User Manual
- August 23, 2024
- OVLENG
Table of Contents
OVLENG FF93 Bluetooth Headset
Product Information
Specifications
- Compliance: Part 15 of FCC Rules
- Radiation Exposure Limits: FCC Approved
- Operating Distance: Minimum 0cm between radiator and body
Product Usage Instructions
Installation
- Place the device on a stable surface.
- Ensure there is a minimum distance of 0cm between the device’s radiator and your body.
- Connect the necessary power source as per the provided guidelines.
Operation
- Power on the device using the designated switch or button.
- Follow the user manual for specific instructions on operating the device.
- Monitor the device during operation to ensure proper functioning.
Maintenance
- Regularly clean the device with a soft, dry cloth to prevent dust accumulation.
- Avoid exposing the device to extreme temperatures or humidity.
- Refer to the user manual for any specific maintenance requirements.
FAQ
- Q: Can I modify the device for better performance?
- A: No, any changes or modifications not approved by the manufacturer could void your warranty and authority to operate the equipment.
- Q: Is it safe to use the device close to my body?
- A: The device should be operated with a minimum distance of 0cm between the radiator and your body to comply with FCC radiation exposure limits and safety regulations.
Packaging Articles
- Quick start guide (this guide)
- Wireless headset
- USB-C Charging Cable
Product Specification
- Distance: 10M
- Battery volume: 300mAh
- Speaker size: 40mm
- Charging voltage: DC5V
- Speaker impedance: 32
- Working time: 28-32h
- Version: V5.3
- Microphone: Built-in
- Working voltage: DC3.7V
- Frequency response: 20-20KHz
Function Picture
- ANC on/off
- Volume Up/ Next Track
- Power Answer/ Hang up/ Reject/ Siri
- Volume Down/Previous Track
- Type-C charging port
- 3.5mm Aux jack
- Mic
- Indicator
Pairing Steps
- After pressing” ” to power on, it will automatically enter pairing mode. (The indicator light will alternate between red and blue ).
- Go to the Bluetooth settings on your device and locate the Bluetooth pairing name ” FF93″. Pair your device, and once successfully connected, only the blue light will flash.
Product Usage
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses, and can radiateradio frequency energy and, if not installed and used by the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>