Silkland S1401 USB C to Display Port 1.2 Cable User Manual

: June 30, 2024
: Silkland

Table of Contents

Silkland S1401 USB C to Display Port 1.2 Cable User Manual
Product Information
Product Usage Instructions
Federal Communications Commission (FCC) Statement
IC Statement
Declaration of Conformity
Declaration of Conformity
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Silkland S1401 USB C to Display Port 1.2 Cable User Manual

Product Information

Specifications

Name: USB C to DisplayPort 1.2 Cable
Input: USB C
Output: DisplayPort
Resolution: 4K@60Hz, 2K@165Hz
Attention: Not Compatible with HDMI/Lightning

Product Usage Instructions

Connecting the Cable

Locate the USB C port on your device.
Insert the USB C connector of the cable into the USB C port securely.
Connect the DisplayPort end of the cable to your display or monitor.

Setting Up Display Resolution

To achieve the desired resolution, follow these steps:

Access your device’s display settings.
Select the appropriate resolution (4K@60Hz or 2K@165Hz).
Confirm the changes to apply the new resolution.

Important Notes

Avoid bending or twisting the cable excessively to prevent damage.
Ensure both ends of the cable are securely connected for optimal performance.
Do not use this cable with HDMI or Lightning ports as it is not compatible.

Federal Communications Commission (FCC) Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.
Notes: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

IC Statement

This digital apparatus complies with CAN ICES-003(B)/NMB-003(B

The Waste Electrical and Electronic Equipment (WEEE) Directive Statement

This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Declaration of Conformity

Hereby, Silkland (Shenzhen Guanhai Technology Co., Ltd.) declares that this equipment is in compliance with the following Directives: 2014/30/EU & 2011/65/EU. The full text of the EU Declaration of conformity is available at the following internet address
https://www.silklandtech.com
Shenzhen Guanhai Technology Co., Ltd.
Room 1010, Jingxing Haishang Building, No. 91 Guiwan 3rd Rd., Nanshan St., Shenzhen 518000, China
The following importer is the responsible party (for EU matters only):
WSJ Product Ltd.
Eschborner Landstraße 42-50, 60489 Frankfurt am Main, Germany
E-Mail: info@wsj-product.com

Declaration of Conformity

Hereby, Silkland (Shenzhen Guanhai Technology Co., Ltd.) declares that this equipment is in compliance with the following Directives: The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment Regulations 2012 & Electromagnetic Compatibility Regulations 2016.
The full text of the GB declaration of conformity is available at the following internet address:
https://www.silklandtech.com
The following importer is the responsible party
(for UK matters only): WSJ Product Ltd.
Unit 1 Alsopo Arcade, Brownlow Hill, Liverpool,
L3 5TX, UK
E-Mail: info@wsj-product.com

For user manual, FAQS and more information, please visit： https://silklandtech.com/pages/support
Or scan the QR code below: