Silkland S1301 Display Port 2.1 Cable User Manual

: June 30, 2024
: Silkland

Table of Contents

Silkland S1301 Display Port 2.1 Cable User Manual
Specifications
Product Usage Instructions
Federal Communications Commission (FCC) Statement
IC Statement
Declaration of Conformity
GB Declaration of Conformity
Customer Service
2-Year Warranty
FAQ

Silkland S1301 Display Port 2.1 Cable User Manual

Specifications

Name: DisplayPort 2.1 Cable
Input: DisplayPort
Output: DisplayPort
Resolution: 16K/8K@60Hz, 4K@240Hz
Attention: Not Compatible with HDMI/USB C
VESA Certified Lengths: 0.5M, 1M, 2M

Associated Models

S1301, S1302, S1303, S1304, S1305, S1306, S1307, S1308, S1309, S1310, S1311, S1312, S1313, S1314, S1315, S1316, S1317, S1318, S1319

Product Usage Instructions

Step 1: Connection

Connect one end of the DisplayPort 2.1 Cable to the DisplayPort output on your device.

Step 2: Display Setup

Ensure your display supports the resolution you intend to use (16K/8K@60Hz or 4K@240Hz).

Step 3: Power On

Power on your device and the display to establish a connection.

Step 4: Configuration

Adjust the display settings on your device to optimize the viewing experience.

Federal Communications Commission (FCC) Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.
Notes: This equipment has been tested and found to comply with the limits for a Class B digital device. under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

IC Statement

This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).
The Waste Electrical and Electronic Equipment (WEEE) Directive Statement

This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Declaration of Conformity

Hereby, Silkland (Shenzhen Guanhai Technology Co., Ltd.) declares that this equipment is in compliance with the following Directives: 2014/30/EU & 2011/65/EU. The full text of the EU Declaration of conformity is available at the following internet address
https://www.silklandtech.com
Shenzhen Guanhai Technology Co., Ltd.
Room 1010, Jingxing Haishang Building, No. 91 Guiwan 3rd Rd., Nanshan St., Shenzhen 518000, China
The following importer is the responsible party (for EU matters only): WSJ Product Ltd.
Eschborner Landstraße 42-50, 60489 Frankfurt am Main, Germany
E-Mail: info@wsj-product.com

GB Declaration of Conformity

Hereby, Silkland (Shenzhen Guanhai Technology Co., Ltd.) declares that this equipment complies with the following Directives: The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment Regulations 2012 & Electromagnetic Compatibility Regulations 2016.
The full text of the GB declaration of conformity is available at the following internet address:
https://www.silklandtech.com

The following importer is the responsible party
(for UK matters only): WSJ Product Ltd.
Unit 1 Alsopo Arcade, Brownlow Hill, Liverpool, L3 5TX, UK
E-Mail: info@wsj-product.com