6 SIGMA 6S-80 Assembly Documentation Instructions
- June 29, 2024
- 6 SIGMA
Table of Contents
6 SIGMA 6S-80 Assembly Documentation
Product Specifications
- Model: 6S-80
- Dimensions: Various sizes ranging from 40mm to 1200mm in length
- Material: Aluminum extrusions
- Includes: Various brackets, angles, nuts, screws, and T-nuts
Product Usage Instructions:
Assembly
- Ensure you have all the necessary parts as listed in the manual.
- Follow the step-by-step assembly instructions provided in the manual.
- Pay attention to safety guidelines such as wearing goggles when handling sharp edges.
- Protect the product from scratches by using a towel or blanket when assembling on hard surfaces.
Step-by-Step Assembly
- Step 1: Install 4-40×40 angle with M8 T-Nuts and screws.
- Step 2: Attach 6-80×80 bracket and 3-40x80x500 angle as instructed.
- Step 3: Use 2-40x80x1200 extrusions with 6-foot pad and M8 T-Nuts.
- Step 4: Follow the instructions for the specific component provided (320 [122] in this case).
- Step 5: Install 2-40x80x400 extrusions according to the manual.
- Step 6: Secure parts using M8 nuts, T-Nuts, and screws as specified.
- Step 7-12: Follow the remaining steps in the assembly process.
Frequently Asked Questions (FAQ):
Q: What should I do if I encounter difficulties during assembly?
A: If you face any challenges during assembly, refer to the detailed
instructions provided in the manual or contact our customer support for
assistance.
Assembly Documentation
(Shown with optional 6 SIGMA label plate.)
(Shown with optional shifter mount and mouse pad kit.)
Need help? Email: info@6sigmasimracing.com
Toll-free: 1-888-608-6161
PARTS
NOTES
Safety First
Be mindful of any sharp edges. Use safety goggles whenever removing tabs from angle brackets.
Protect From Scratches
Hard surfaces can damage the surfaces of the aluminum extrusions.
Use a towel or blanket when assembing on hard surfaces to protect the
finishes.
How to measure screws
Flat head screws are measured based on their overall length.
Socket head cap screws are measured based on the length under the head of the
screw.
Metric Conversions
- 25.4 mm = 1″
- 16 mm = 5/8″
- 20 mm = 25/32″
- 320 mm = 12 9/16″
- 400 mm = 15 3/4″
- 500 mm = 19 11/16″
- 580 mm = 22 13/16″
- 700 mm = 27 9/16″
- 1200 mm = 47 1/4″
T-Nut Installation
Be mindful of the order of installation
and plan out the insertion of T-nuts.
Alignment Tab Removal
Tabs on brackets may need to be removed if they interfere with the
installation of an extrusion as shown to the right.
2 – tabs need to be removed from 4 brackets
SHIFTER MOUNT AND MOUSE PAD KIT (OPTIONAL)
Need help? Email: info@6sigmasimracing.com Toll-free: 1-888-608-6161