6 SIGMA 6S-SLIM Sim Racing Chassis Instruction Manual
- June 12, 2024
- 6 SIGMA
Table of Contents
6S-SLIM
Assembly Documentation
PARTS
NOTES
Safety First
Be mindful of any sharp edges. Use safety goggles whenever removing tabs from
angle brackets.
Protect From Scratches
Hard surfaces can damage the surfaces of the aluminum extrusions.
Use a towel or blanket when assembing on hard surfaces to protect the
finishes.
How to measure screws
Flat head screws are measured based on their overall length.
Socket head cap screws are measured based on the length under the head of the
screw.
Metric Conversions
25.4 mm = 1″
16 mm = 5/8″
20 mm = 25/32″
320 mm = 12 5/8″
400 mm = 15 3/4″
480 mm = 18 7/8“
500 mm = 19 11/16″
660 mm = 26“
1200 mm = 47 1/4″
T-Nut Installation
Be mindful of the order of installation and plan out the insertion of T-nuts.
Alignment Tab Removal
Tabs on brackets may need to be removed if they interfere with the
installation of an extrusion as shown to the right.
2 – tabs need to be removed from 4 brackets
|
---|---
|
|
|
|
|
Need help?
Email: info@6sigmasimracing.com
Toll-free: 1-888-608-6161