6 SIGMA SIM RACING 6S-SLIM Optional Shifter Mount and Mouse Pad Kit Instruction Manual
- June 29, 2024
- 6 SIGMA SIM RACING
Table of Contents
6S-SLIM Optional Shifter Mount and Mouse Pad Kit
“`html
Specifications:
- Material: Aluminum extrusions
- Dimensions: Various sizes as per assembly instructions
Product Usage Instructions:
Notes on Safety and Protection:
-
Safety First: Be cautious of sharp edges.
Always wear safety goggles when working with angle brackets. -
Protect From Scratches: To prevent damage,
assemble on soft surfaces or use a towel or blanket under the
parts. -
Measurement Guide: Flat head screws are
measured by total length, while socket head cap screws are measured
by length under the head. -
Metric Conversions: Helpful conversions
provided for common measurements.
Assembly Steps:
Step 1:
Assemble the 16-40×40 angle with 32 M8 T-Nuts and 32 M8x16
screws. Ensure screws are loose to insert T-Nuts into aluminum
profiles.
Step 2:
Follow the instructions to assemble components with tabs removed
as per the provided diagram.
Step 3:
Continue assembling with the 2-40x40x1200 unit, 6-foot pad, and
6 M8 T-Nuts as indicated.
Step 4:
Proceed with the assembly of the 320 [1258] unit.
Step 5:
Assemble the 2-40x40x400 unit according to the instructions.
Step 6:
Use the provided components to complete the assembly as
detailed.
Step 7 – Step 12:
Follow the remaining steps to complete the assembly process.
Frequently Asked Questions (FAQ):
Q: What do I do if I encounter sharp edges during
assembly?
A: Always wear safety goggles and handle parts carefully to
avoid injuries from sharp edges.
Q: How should I protect the aluminum extrusions from
scratches?
A: Use a soft cloth, towel, or blanket when assembling on hard
surfaces to prevent scratches on the extrusions.
Q: How do I measure screws correctly for assembly?
A: Flat head screws are measured by their total length, while
socket head cap screws are measured by the length under the head of
the screw.
“`
6S-SLIM Assembly Documentation
(Shown with optional shifter mount and mouse pad kit.)
Need help? Email: info@6sigmasimracing.com Toll-free: 1-888-608-6161
1
PARTS
7
3
5
6
12
8.1 9 8.2
11
4 10
1 13
3-M8 NUT 4-M8x12 4-M8x20 44-M8x16 62-M8 T-NUT
14
2
M10
M14
M13
M6 M5 M4
6-FOOT PAD 10-TIE DOWN
16-40×40 ANGLE 8-40×40 CAP
2-40×80 CAP
11
12
10
16-ANGLE CAP
10-CABLE TIE 14
4-8×30 16-8×20
8-M8x20
8-M6x16 6-M6x20
13
Need help? Email: info@6sigmasimracing.com Toll-free: 1-888-608-6161
2
2 x 40-40-1200 mm
1
2 x 40-80-630 mm
2
6
7
8.1
8.2
9
2 x 40-40-400 mm
3
4 3 x 40-40-500 mm
5 1 x 40-80-480 mm
Need help? Email: info@6sigmasimracing.com Toll-free: 1-888-608-6161
3
NOTES
Safety First
Be mindful of any sharp edges. Use safety goggles whenever removing tabs from
angle brackets.
Protect From Scratches
Hard surfaces can damage the surfaces of the aluminum extrusions.
Use a towel or blanket when assembing on hard surfaces to protect the
finishes.
How to measure screws
Flat head screws are measured based on their overall length.
Socket head cap screws are measured based on the length under the head of the
screw.
Metric Conversions
25.4 mm = 1″
16 mm = 5/8″ 20 mm = 25/32″ 320 mm = 12 5/8″ 400 mm = 15 3/4″ 480 mm = 18 7/8″
500 mm = 19 11/16″ 660 mm = 26″ 1200 mm = 47 1/4″
20 20
Flat Head Screw
Socket Head Cap Screw
Need help? Email: info@6sigmasimracing.com Toll-free: 1-888-608-6161
4
T-Nut Installation
Be mindful of the order of installation
and plan out the insertion of T-nuts.
Alignment Tab Removal
Tabs on brackets may need to be removed if they interfere with the
installation of an extrusion as shown to the right. 2 – tabs need to be
removed from 4 brackets
1
2
REMOVE 2 TABS
3
Need help? Email: info@6sigmasimracing.com Toll-free: 1-888-608-6161
5
STEP 1
16-40×40 ANGLE 32-M8 T-NUT 32-M8x16
NOTE:
Leave screws loose enough to slide the T-Nuts into the aluminum extrusion
profiles.
x 12 x 16
x 4 – TABS REMOVED
Need help? Email: info@6sigmasimracing.com Toll-free: 1-888-608-6161
6
STEP 2
3-40x40x500
x 4 – TABS REMOVED
x 6
A
x 2
x 1
Need help? Email: info@6sigmasimracing.com Toll-free: 1-888-608-6161
7
STEP 3
2-40x40x1200
6-FOOT PAD 6-M8 T-NUT
M14
M13
x 2
Need help? Email: info@6sigmasimracing.com Toll-free: 1-888-608-6161
8
STEP 4
320 [1258]
Need help? Email: info@6sigmasimracing.com Toll-free: 1-888-608-6161
9
STEP 5 2-40x40x400
Need help? Email: info@6sigmasimracing.com Toll-free: 1-888-608-6161
10
STEP 6
2-M8 NUT 8-M8 T-NUT 8-M8x16 4-8×20
Need help? Email: info@6sigmasimracing.com Toll-free: 1-888-608-6161
11
STEP 7
Need help? Email: info@6sigmasimracing.com Toll-free: 1-888-608-6161
12
STEP 8
2-40x80x630
x 4
x 2
Need help? Email: info@6sigmasimracing.com Toll-free: 1-888-608-6161
13
STEP 9
Need help? Email: info@6sigmasimracing.com Toll-free: 1-888-608-6161
14
STEP 10
1-40x80x480 12-M8 T-NUT 4-M8x20 4-8×20 4-M8x16 8-M8x20
Need help? Email: info@6sigmasimracing.com Toll-free: 1-888-608-6161
15
STEP 11
Need help? Email: info@6sigmasimracing.com Toll-free: 1-888-608-6161
16
STEP 12 4-ANGLE CAP
12-40×80 CAP
8-40×40 CAP
Need help? Email: info@6sigmasimracing.com Toll-free: 1-888-608-6161
17
SHIFTER MOUNT AND MOUSE PAD KIT (OPTIONAL)
1-40x40x320
1-40x80x580
9-M8 T-NUT
3-M8x20
x 4
6-M6 NUT
6-M6x20
MOUSE PAD
2-M8x16 SHIFTER MOUNT BRACKET
SHIFTER MOUNT
Need help? Email: info@6sigmasimracing.com Toll-free: 1-888-608-6161
18
x 2
4-ANGLE CAP
2-40×40 CAP
Need help? Email: info@6sigmasimracing.com Toll-free: 1-888-608-6161
19