GRACE GR-SDL05XX-13 Smart Down Light UMNAK Multicolor and Tunable User Guide
- June 6, 2024
- GRACE
Table of Contents
- Features
- Parameters
- Technical Drawing
- Download App
- Log In / Register Account Number
- Device Pairing
- Enter the Password of Network
- Connecting
- Confirmation
- White Mode
- Scene Mode
- Sleep Mode
- Schedule Mode
- Installation
- App Function Introduction
- Third-Party Control
- FCC Statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Smart Down Light UMNAK
Multicolor & Tunable White
Features
| Wi-Fi & Bluetooth
Connection
---|---
Timer & Schedule
Grouping
Sync with Music
No Hub Required
| Voice Control
---|---
Dimmable
Circadian Rhythm
Remote Control
Parameters
Color | Input Voltage | Frequency | Power | luminous flux |
---|---|---|---|---|
2700-6500K+RO6 | AC110-130V | 60Hz | 13W | 11001m |
Technical Drawing
Download App
-
Search “Tuya Smart” from the App store or Google play.
-
Scan the QR code from the label or user manual.
https://smartapp.tuya.com/tuyasmart
The APP is compatible with Android 4.4 and IOS9.0 and higher versions.
Log In / Register Account Number
Open the Tuya Smart APP, sign up for a new account or log in with an existing account.
Device Pairing
Turn on the Smart Down Light and enter the home of the APP while ensuring Bluetooth is on. Smart Down Light will flash when turning on the power supply. Stay at the home page and found the push notification, then click ”Go to add”.
Enter the Password of Network
Select the Wi-Fi connected to the smart device, input the Wi-Fi password, and then click “Next” to wait for the matching to succeed. (Make sure smart devices share the same Wi-Fi) Note: Only 2.4GHz b/g/n network supported
Connecting
The interface of connecting will appear, when the device is found, the lamp will stop blinking, and then initializing device will be complete.
Confirmation
The Smart Down Light is added once they are communicating on the same Wi-Fi network. You can rename the smart device by clicking on the pencil icon. Press the “Done” button at the bottom of the screen to continue to the next step.
Control Device
After the device is connected successfully. The device name of the smart lamp shows in the list. Tap it to enter the control panel of the Smart Down Light.
White Mode
The White Mode screen will allow basic controls over the standard lighting model.
- Bright controls the brightness
- Color Temp allows the light to take different moods
Color Mode
Color Mode allows additional controls over the lighting.
- Saturation will give more brilliance to the lighting
- Bright will allow control over light intensity
Scene Mode
Choose from a variety of scenes or create your own.
You can create a scene for movie night, a party scene with colorful light, or
even a candlelit scene with warm, low lighting.
Sync with Music
Choose Music Sync to match color changes to the beat of the music playing on your speakers.
Sleep Mode
- Click “More”
- Click “Plan”
- You can select plan type “Sleep plan”
- First, configure the hours (left)
- Next, configure minutes (right)
- You can customize the repetition time
- Click “Save” to save the settings
Wake Mode
- Click “More”
- Click “Plan”
- You can select plan type “Wake up plan”
- First, configure the hours (left)
- Next, configure minutes (right)
- You can customize the repetition time
- Click “Save” to save the settings
Schedule Mode
Set schedules based on your preferences and daily needs.
Choose individual actions for each Flood Light, set the same schedule for more
than one day, and create a schedule for a group of Down Lights. Schedules are
a great way to have your lights work around your life.
Circadian Rhythm
- Change the color temperature of the lights adjusts naturally to keep your body in its natural rhythm.
- Light has a big effect on our circadian rhythm and our regular lighting interferes with our circadian rhythm causing health problems.
- Our Smart Down Light can be programmed to give you the correct amount of light at the correct color temperature to work in harmony with our circadian rhythm instead of against it.
Group Control
If you got two or more lights, please tap ” ” at the upper right corner of the
control panel and create a group. The smart lamp group will realize
synchronous switch, color changes, scene mode selection, timer, etc.
Installation
- Make sure the power is turned off at the source to the recessed can.
- Screw the E26 socket adapter into the recessed can socket by turning clockwise. (This retrofit downlight was set for 5-6 inch fixture housing)
- Plug E26 adapter’s male connector into the downlight’s female connector.
- Push two ends of the Flip Clip toward each other till it can fit into the recessed can.
- Install the downlight up into the recessed can firmly until the rim ring is flush with the ceiling.
- Turn on the power supply and connect with our App to control the light.
App Function Introduction
Click the interface to control it according to the specific model of the specific Smart Down Light. The following is a public function introduction.
| Remote Control: The Smart Down Light can be controlled anywhere after
the smart device is successfully connected.
---|---
Timer Function : Set the timer to turn ON and turn OFF the Smart Down
Light.
Intelligent Scene : The system sets a variety of intelligent scenes, and
different scenes correspond to different lighting atmospheres.
Grouping: Group control is available (only for the same type of product).
Family room management.
Device Sharing: The device is shared with other user control devices in
the home.
Third-Party Control
In the Tuya Smart APP: Find more services in the “Me” menu, click to enter
“voice service” (Alexa/ Google Assistant) and other services, click on the
service you need.
Connect to the third-party service device according to the operation guide.
For any product and APP updating, please contact customer service.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20cm between the radiator
and your body.