Comfee CXC05APGY Wet and Dry Vacuum Cleaner Instruction Manual
- June 28, 2024
- comfee
Table of Contents
- CXC05APGY Wet and Dry Vacuum Cleaner
- Wet & Dry Vacuum Cleaner
- Specifications:
- Product Overview:
- Product Installation:
- Handle Installation and Removal:
- Charging Battery:
- Filling Clean Water Tank:
- Q: How long does it take to fully charge the vacuum
- Q: Can I use any cleaning solution in the clean water
CXC05APGY Wet and Dry Vacuum Cleaner
Wet & Dry Vacuum Cleaner
Specifications:
- Product Model: CXC05APGY
- Charging rated input: 100-240V, 50/60Hz
- Charging output: 27V, 0.8A
- Power: 200W
- Voltage: 22.2V
- Net Weight: 3.5kg
- Product Size (WxDxH): 270x282x1120mm
- Clean water tank volume: 800mL
- Dirty water tank MAX line volume: 400mL
Product Overview:
- Switch power mode
- Power on/off
- Handle
- Voice navigation
- Self-clean button
- Clean water tank
- Wastewater tank release button
- Dirty water tank
- Brush-roll
- Waste water lifting Brush-roll cover
Product Installation:
Handle Installation and Removal:
Installation: Insert the end of the handle into
the port of the main unit along the vertical direction until there
is a click, which indicates the installation is successful.
Removal: Insert a screwdriver or other tools
into the hole, and pull out the handle upward.
Charging Battery:
-
Only use the detachable supply unit provided with this
appliance. -
Insert the charging end of the charger into the rear port of
the charging dock, and connect the plug to a 100V-240V power
source. -
Put the machine upright into the charging base, ensuring the
bottom of the body completely falls into the charging base. A voice
prompt will indicate charging has started, and the indicator light
will flash. -
It takes about 3-4 hours to fully charge the machine. When
fully charged, the indicator will turn off, and the machine will
automatically power off.
Filling Clean Water Tank:
-
Hold the machine with one hand, grab the water tank with the
other hand, rotate and remove the water tank. -
Unscrew the water tank cover, pour tap water into the water
tank, and add an appropriate amount of cleaning solution if
desired. -
Screw the water tank back into place on the machine. When you
hear a click sound, it indicates successful installation.
FAQ:
Q: How long does it take to fully charge the vacuum
cleaner?
A: It takes about 3-4 hours to fully charge the machine. When
fully charged, the indicator will turn off, and the machine will
automatically power off.
Q: Can I use any cleaning solution in the clean water
tank?
A: It is recommended to use a cleaning solution that is no harm
to the human body and friendly to the environment.
Wet & Dry Vacuum Cleaner
Instruction Manual
Please read this manualcarefully before operating your set and retain ist for
future reference
CONTENTS
CONTENTS———————————————————01 SAFETY INSTRUCTIONS—————————————- 02
SPECIFICATIONS————————————————- 06 PRODUCT OVERVIEW——————————————-07 PRODUCT
INSTALLATION————————————– 09 OPERATION INSTRUCTIONS ———————————– 11 CLEANING
AND MAINTENANCE—————————— 13 TROUBLE SHOOTING ——————————————–16
01
SAFETY INSTRUCTIONS
Intended Use
The following safety guidelines are intended to prevent unforeseen risks or
damage from unsafe or incorrect operation of the appliance. Please check the
packaging and appliance on arrival to make sure everything is intact to ensure
safe operation. If you find any damage, please contact the retailer or dealer.
Please note modifications or alterations to the appliance are not allowed for
your safety concern. Unintended use may cause hazards and loss of warranty
claims.
Explanation of symbols
Important Safety Instructions
· This product is suitable for hard floors in the indoor environment,
including waxed floors, stone floors, rubber floors, marble floors, granite
floors, terrazzo floors, solid wood floors, composite floors, bamboo floors,
as well as glazed tiles, ceramic facing tiles and other flat ground. It may
not achieve the best results if the product is used on uneven ground surface.
· Do not use this product near or on the surface of flammable and explosive
objects, which may cause fire and explosion. · Do not use this product near a
working fireplace or heater to prevent deformation of the machine casing. · Do
not use it to clean high-temperature substances (unextinguished cigarette
butts, matches or hot ash, etc.), ultra-fine substances (such as lime, cement,
wood chips, gypsum powder, ashes, charcoal, etc.), dangerous substances (such
as solvents, descaling agents, etc.), chemical substances (such as acidic
substances, detergents, etc.) and other substances with uncertain physical
properties. · Do not use this floor cleaner to absorb detergent, kerosene,
gasoline, alcohol, paint or perfume, or else it may cause short-circuit, fire
or explosion. · Do not use this floor cleaner to absorb toner used in laser
printers and copiers, or else it may cause fire or explosion. · Do not use
this floor cleaner to absorb sharp or large objects, such as glass shards,
small toys, pins, paper clips, stones, plaster and large pieces of paper, or
else it may block up and damage the machine. · Do not use this floor cleaner
to absorb any burning or smoking objects, such as soot from the unextinguished
heat source, burning cigarette butts or matches. This product can’ t be used
to clean stains of strong grease, strong viscosity, or strong dyeing
properties such as shoe polish, paint, and pigments. · Do not touch the plug
or any live part of the product with wet hands to avoid the risk of electric
shock. · Stop using it if the plug is damaged. Please call our service
personnel for replacement in order to avoid hazards. Please keep the airflow
channels and moving parts of this product away from long hair, loose clothing,
fingers and other parts of the body. Do not point the suction tube, accessory
tip or tool to the eyes or ears, or put them in the mouth. Please use the
cleaning agent produced by our company and the manufacturer approved by us. Do
not add other solutions to avoid generating toxic and harmful gases. If
electric leakage, motor over-temperature, abnormal noise, peculiar smell or
weak suction is found during use, stop using it immediately and call our
service personnel. After using the machine, please clean the wastewater tank
in time to avoid peculiar smell, and keep the ventilation path unobstructed,
so as to avoid obstruction, or else it will cause the suction power to drop,
the motor to heat up, and will affect the service life of the floor cleaner.
After using the machine, please store it in a dry place. A humid place will
affect the insulation and service life of the appliance. Do not soak or rinse
the floor cleaner or floor brush in water.
03
Important Safety Instructions
· This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. · Cleaning and user maintenance shall not be made by children
without supervision. · Children should not play with the appliance. · Please
check the suction nozzle regularly. If there is a blockage, please clear it in
time to avoid decrease in suction and affecting the performance of the
machine. Turn off the power before replacing the brush. · In the following
situations, do not use the machine, contact to our customer service center for
inspection and repair in time: 1.Obvious damage or abnormal operation caused
by drop; 2.Power cord is damaged. · Do not disassemble the enclosed machine
without permission. There are no user serviceable parts. Do not try to change
the performance of the machine, or else it will cause danger. · Using a
voltage that does not match the specifications will cause damage to the
product and more likely to cause harm to the user. The correct rated voltage
is marked on the nameplate. · When cleaning the stairs, be extra cautious to
prevent falling. · Do not shake or impact the machine up and down to prevent
wastewater from flowing into the motor. · When the motor is working, do not
lift or carry the appliance up and down, and do not put the machine on its
side to prevent the wastewater from entering the motor. To prevent tip-over,
place the machine against the wall after use. · Do not use the floor cleaner
before the clean water tank and wastewater tank are installed properly. · Do
not place any small objects in the outlet or block the outlet. Remove any
small objects that may interfere with the flow of air through the outlet to
prevent overheating of the machine. · Do not wet the machine body, or it may
cause damage and fire due to short circuit. · This is only allow to use the
docking station for charge the battery. · The plug must be removed from the
socket-outlet before cleaning or maintaining the appliance. · All the
technologies and other data in this manual are obtained by our company or the
designated third party testing company, and we reserve the right of final
interpretation.
04
Use and Precautions of Washer Detergent
· Mix and clean according to instructions. It is recommended to use cleaning
liquid produced by our company or manufacturers approved by our company, which
do not contain acid, alkali solutions or substances harmful to the
environment. · If a large amount of cleaning liquid is added, more foam will
be generated when used, which may infiltrate into the motor and cause danger.
· The cleaning liquid should be kept out of reach of children. If the cleaning
liquid accidentally gets into eyes, rinse thoroughly with clean water; in case
of accidental ingestion, seek medical treatment immediately. Follow local
environmental protection regulations when handling wastewater and cleaning
liquid.
05
SPECIFICATIONS
Product Model Charging rated input Charging output Power Voltage Net Weight
Product Size (WxDxH) Clean water tank volume Dirty water tank MAX line volume
CXC05APGY 100-240Vj50/60Hz 27V0.8A 200W 22.2V 3.5kg 270x282x1120mm 800mL 400mL
06
PRODUCT OVERVIEW
Product introduction
Switch power mode
Power on/off
Handle
Voice navigation
Self-clean button
Clean water tank
Wastewater tank release button Dirty water tank
Brush-roll
Waste water lifting Brush-roll cover
List of Accessories
Docking station
Cleaning brush
Filter
User’s Manual
User’s Manual
07
Parts
Switch power mode
Voice navigation
Self-clean button Power on/off
Auto mode · the water from the machine wets the brush-roll to clean the floor;
Quick suction mode · the machine stops discharging water, and sucks dry
garbage or residual water;
Add the cleaner · Cleaning and disinfecting agent obtained by means of
electrolysis with a dilute sodium
chloride solution and it is no harm to the human body and friendly to the
human body and friendly to the environment.
08
PRODUCT INSTALLATION
Handle Installation and Removal
Installation Insert the end of the handle into the port of the main unit along
the vertical direction until there is a click, which indicates the
installation is successful;
Removal Insert a screwdriver or other tools into the hole, and pull out the
handle upward.
Handle Insert
Disassembly hole
Charging Battery
WARNING · For the purposes of recharging the battery,
only use the detachable supply unit provided with this appliance.
Attention · Charge the product before the first use.
1. Insert the charging end of the charger into the rear port of the charging
dock, and connect the plug to a 100V-240V power
2. Put the machine upright into the charging base, and make sure that the
bottom of the body completely falls into the charging base. At this moment, a
voice will prompt “start charging”, and the indicator light flashes.
3. It takes about 3-4 hours to fully charge the machine.When the battery is
fully charged, the indicator will turn off and the machine will automatically
power off.
Guiding lights
09
Attention · Voice cannot be triggered when turned off
4. When the machine is first turned on, the voice function is enabled by
default. While in the on or pause state, you can press the voice button to
turn off the voice function. Pressing the same button again will re-enable the
voice function.
Filling Clean Water Tank
Attention · Fill water only to the clean water tank.
1. Hold the machine with one hand, grab the water tank with the other hand,
rotate and remove the water tank;
2. Unscrew the water tank cover, pour tap water into the water tank, and add an appropriate amount of cleaning solution if desired;
Unscrew
Unscrew
Cleaning Solution
3. Screw the water tank back into place on the machine, and when you hear a click sound, it means the installation is successful.
Screw back into
Screw back into
10
OPERATION INSTRUCTIONS
Turning On and Cleaning
Step 1 Step on the floor brush and pull the handle diagonally until you hear a
click. The machine is now in standby mode.
Step 2 To start working, press the power button. Press this button again to stop the machine.
Step 3 The machine defaults to automatic mode when it starts. To switch to the sterilization mode, press the mode switch button. Press this button again to switch to the suction mode.
Power button
Mode switch button
Attention · After using the machine, it is recommended to place it vertically
on the specially
designed charging base.
11
Upright Pause Function
In working state, you can step on the floor brush to erect the body, the
machine will stop working and enter standby state; it will automatically turn
off after 2 minutes of standby.
Self-cleaning + Drying Function
Caution
· During the air-drying process, the machine does not charge. After the air-
drying is complete, it automatically enters the charging state. It is normal
for the machine to indicate low battery after air-drying in a low battery
state.
· In the air-drying mode, to improve the drying effect, the rolling brush will
rotate every 2 minutes with a “drip” sound, which is a normal phenomenon.
1. When the machine is in charging state, short press the self-cleaning
button to activate the self-cleaning and self-drying mode. During the self-
drying process, the roller brush rotates for 30 seconds for centrifugal
drying, followed by the low-speed operation of the fan for 90 minutes to
properly dry the roller brush and pipeline.
2. When the machine is in charging state, long press the mode switch button
for 3 seconds to directly enter the self-drying mode.
3. To stop the self-cleaning or self-drying, press the self-cleaning button
again.
4. After the self-cleaning is completed, please clean the wastewater tank in
time. If there are residual stains on the base, please clean them in time.
Mode switch button
12
CLEANING AND MAINTENANCE
Waste Water Detect Alarm
Attention
· After cleaning, it is recommended to place the machine upright in the
charging base; do not place the machine in places with direct sunlight or
moisture;
· In order not to affect the performance of the machine, it is recommended
that you regularly maintain its parts;
· Before cleaning, please disconnect the power supply to stop the machine; ·
Scrub with water or neutral detergent, wring out the cleaning cloth before
scrubbing to avoid water leaking into the electrical components.
1. Press the button of wastewater tank with your thumb and pull outward to remove the tank.
2. Hold the tank with one hand and pull out the top cover of the tank with the other hand.
Pull outwards
Top cover of wastewater tank
Waste water tank
Upwards
3. Dump the sewage from the side of the sewage tank and rinse it clean;
remove the filter from the top cover of the sewage tank, rinse it clean, and
air-dry it.
Filter
4. Install the wastewater tank back to the machine until there is a click
sound; (when installing wastewater tank, it is recommended to hold the body
with another hand to avoid tipping over).
Install it back
Cleaning
Air-dry 13
Brush-roll and Cover Cleaning
Attention
· It is recommended that after each use, the roller brush and cover should be
cleaned and dried in time;
· If residual stains are found on the suction surface of the floor brush, wipe
it with a wet cloth. Do not rinse it with water.
1. press the buckle as shown in the diagram to remove the floor brush cover;
2. Rotate the end cap knob as shown in the diagram and pull out the roller brush sideways;
Press extraction
a. Rotate the end cap knob
b. Pull out the roller
3. If there is still hair or other debris tangled on the roller brush after self-cleaning, remove the tangled debris from the roller brush; for heavy-duty cleaning (such as tomato sauce, soy sauce, etc.), if there is still dirt residue on the roller brush after self-cleaning, it can be self-cleaned again or the roller brush can be removed and cleaned with water;
4. If there is residual dirt on the roller brush cover after self-cleaning, rinse the roller brush cover with water.
14
Brush-roll and Cover Cleaning
5. If there are any residual stains on the suction nozzle (the part exposed
after removing the roller brush) after self-cleaning, please wipe it with a
damp cloth instead of washing it with water.
suction nozzle
6. After cleaning, reinstall the roller brush. If not in immediate use, you
can place the roller brush in a ventilated area to dry before installation.
a. Reinstall the roller
b. Screw the end cover button
7. After cleaning, cover the floor brush, align it with the installation hole, press it down, and you will hear a click when it is successfully installed.
15
TROUBLESHOOTING
Please check the following table in case of any abnormal conditions when using the product.
Problem
Possible cause
Solution
The floor cleaner does not work
° The roller brush is entangled by hair or stuck by foreign objects
° Wastewater tank is full
Remove the roller brush to clean and reinstall
Clean the wastewater tank
° Low battery voltage
Charge
° Roller brush, roller brush cover, or wastewater tank is not installed in place
Remove all components and reinstall them
Suction power is weakened
° The filter screen above theinside of the sewage tank is dirty
° Floor brush suction or pipe blockage
Use after cleaning the filter screen
Wipe the floor brush suction and clean the pipe under the air duct
Roller brush is entangled by hair
Clean the roller brush
° Wastewater tank filter is dirty
Clean the filter and dry thoroughly before installation
Noise when the fan is running
° Foreign matter in the suction port of the floor brush or in the pipe
° Wastewater tank is full
Wipe the suction port and clean the pipe under the air duct
Clean the Wastewater tank
Floor brush doesn’t spray water
Air outlet leaks water
Water leakage at the bottom of floor brush
° Water shortage in clean water Add water to the clean water
tank
tank
° Clean water tank is not installed properly
Reinstall the clean water tank
° Wastewater tank filter is cleaned and not dried after use
Clean the filter and dry thoroughly before installation
° Wastewater tank or filter isn’t Install wastewater tank and
installed
filter
16
Made in China
https://www.feelcomfee.com/hk
CXC05APGY
…………………………………………………………………..
01
……………………………………………………………..
02
…………………………………………………………………..
06
……………………………………………………………..
07
……………………………………………………………..
09
………………………………………………………………
11
……………………………………………………………
13
……………………………………………………………..
16
01
02
· · · · · · · · · · · ·
· · ·
·
· ·
03
· · · · · · 1. 2. · · · · · · · · · · ·
04
· · ·
05
(xx)
CXC05APGY 100-240V ~ 50/60Hz 27V 0.8A 200W 22.2V 3.5kg 270x282x1120mm 800ml 400ml
06
/
07
/
·
·
·
08
“”
·
1. 220V~240V
2. “”
3. 3-4
4.
·
09
·
3. “”
10
1 “”
2
3
·
11
2
·
· 2 “”
1. 30 90
2. 3
3.
4.
12
· · · ·
4. “”
13
· ·
a.
b.
14
a.
b.
7. “”
15
· ·
· · ·
· ·
·
· · · ·
·
·
16
Made in China
https://www.feelcomfee.com/hk
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>