kaiboaudio Verse Plus Bone Conduction Bluetooth Headphones Instructions

: June 12, 2024
: kaiboaudio

Table of Contents

kaiboaudio Verse Plus Bone Conduction Bluetooth Headphones
Product Information
Product Usage Instructions
Product Structure
Features
Product Specifications
APP Related
FCC STATEMENT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

kaiboaudio Verse Plus Bone Conduction Bluetooth Headphones

kaiboaudio-Verse-Plus-Bone-Conduction-Bluetooth-Headphones-PRODUCT-
IMG

Product Information

The product is a device that complies with Part 15 of the FCC Rules. It is designed to operate without causing harmful interference and can accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without any restriction. Please note that any changes or modifications to the unit that are not expressly approved by the party responsible for compliance may void the user’s authority to operate the equipment.

Product Usage Instructions

Ensure that the device is fully charged before use.
Download and install the required app from the official app store.
Open the app and follow the on-screen instructions to complete the setup process.
Make sure that the device is within the recommended range of operation for optimal performance.
Use the app to control and customize the settings of the device according to your preferences.
In case of any issues or concerns, refer to the user manual or contact customer support for assistance.

Following these usage instructions will ensure proper operation of the device and a satisfactory user experience.

Product Structure

kaiboaudio-Verse-Plus-Bone-Conduction-Bluetooth-Headphones-
FIG-1

Status Indicator
Power Button
Type-C Charging Port
Control Bud ( Right bud)
Microphone
Proximity sensor

Note: All pictures in this manual are schematic diagrams which may deviate from the actual object. Please refer to the actual object.

Features

Features Operating Instructions| Light Indicator| Sound Notification
---|---|---

General Settings

Pairing

| Connection in Progress| Earbuds will automatically enter bluetooth pairing when powered on| Slow flashing red and green lights| “Pairing”
Connection

Success

| Select · Kaibo Verse Plus· in device settings to connect| Green light flashes once every 3 seconds| “Connected”
Disconnect| Disconnect bluetooth connection from previously connected device| Blinks Green| “Disconnected”
If no connection over 3 minutes, earbuds will automatically turnoff|

Blinks Red

|

“Power oU-

Call

| Answer/ End Calls|

Press power button one time

Music

Battery

| Low Battery| | Red light flashes once every 10 seconds| “Battery low”(Once every 30 Seconds)
Charging/ Fully charged : Solid Red/ Solid Green
When Type C plug in, earbuds start charging

volume adjustment

Smart Wear Detection

Factory reset setting

|

When earbuds is turned off, press and hold power button for 10 seconds

|

Red light flashes 4times

| “Power on” “Pairing”

4 Doo “Power off”

Voice assistant

|

Press right bud for 3 seconds

| | 1 Beep

3 Doo

Bluetooth Multipoint Connection| Two devices can be connected to the Kaibo Verse Plus headphones. When one device is paused, it will automatically switch to the other device.

Product Specifications

Model No: Kaibo Verse Plus

Bluetooth Version: V5.2| Wire Range: 10 Meters / 33 Feet
Frequency Response 100 Hz—20 KHz| Bluetooth Response: 2.402-2.480 GHz
Impedance : BO| Speaker Driver 014.0mm BCT
Microphone Sensitivity: 40 d8±2 dB| Weight : 27.2g
Battery Capacity : 150 mAh| Battery : lithium battery
Play Time: About 6 Hours| Charging Time: About 1.5 Hour
Button Style: Button+Smart Touch| Waterproof Level : IP55
Electrical Specifications : 5V / 1A| Compatible Profiles : HFP 1. 7,HSP1. 2, A2DP 1. 3, AVRCP 1. 6

Open the App Store, search for Kaibo Audio Connect1, and select from three preset equalizers to choose the right sound performance according to your preference and environment.
In addition to the three equalization modes: Acoustic, Sport, and Manual you can also check the remaining power and update the firmware.
Please refer to the instructions on the official website to update the firmware and reboot the headphones after the update is completed.

FCC STATEMENT

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.