kaiboaudio KaiboFlex Bone Conduction Bluetooth Headset Instructions

kaiboaudio KaiboFlex Bone Conduction Bluetooth Headset

OVERVIEW PRODUCT

Make sure your product comes with the following items:

• Headsett*1
• Charging Dock*1
• Pouch*1
• Type-C charging cable*1
  (Please use a 5V 1A charger for charging)

GETTING STARTED GUIDE

QUICKLY SET UP YOUR KAIBO FLEX

If you are using this product for the first time, please put the headset in the charging dock to full charge.
(Please refer to page 5 for instructions on the power level of the headset and the charging dock.)

1. Power on/off

   • Power on:
   1. With a charging dock, the headset will automatically turn on when the headset is removed from the charging dock.
   2. Without a charging dock, press and hold the left and right ear touch areas for 5 seconds at the same time.
   • Power off:
   1. With a charging dock, put the headset on charging dock, the headset will shut down and start charging.
   2. Without a charging dock, press and hold the left or right ear touch area for 5 seconds

2. Headset pairing
   After the headset is turned on, the red and green lights of both ears flash alternately, and both ears enter the pairing state. The red and green lights of one ear flashes slowly to indicate that the pairing is successful.

3. Connect the phone
   After the headset is paired successfully, turn on the Bluetooth of the mobile phone. search for bluetooth pairing name Kaibo Flex”, click to connect. LED light off means connection succeeded.

4. Wearable Detection Mode
   The headset will auto-pause when it is removed, and auto-play when you put it back on.

5. Multi-Link mode
   The headset can be connected to 2 devices at the same time (connect the first one, then disconnect its Bluetooth. connect the second one, and then turn on the first one’s Bluetooth to connect at the same time).

6. Wireless charging mode
   The charging dock is fully charged within 3 hours of wireless charging.

7. Charging

8. Use 5V/1A Type C to charge the charging dock.

9. Support wireless charging.

SMART TOUCH OPERATION

Restore factory settings: Press and hold both sides for 10 seconds until you hear a sound. If successful, red and green lights will flash alternately, the green light will flash 3 times and automatically turn off.

INDICATOR DESCRIPTION

PRODUCT SPECIFICATION

• Model: Kaibo Flex
• Frequency response: 20Hz~20KHz
• Headset battery capacity: 120mAh 2
• Speaker: Bone conduction speaker
• Charging dock battery capacity: 500mAh
• Headset charging time: about 1 hour/ supports fast charging
• Charging time in the charging dock: about 2 hours
• Bluetooth version: BT5.2 EDR
• Bluetooth connection distance: > 10 meters
• Bluetooth communication protocol: HSP HFP, A2DP, AVRCP
• Headset usage time: 6-8 hours (average measured data at 70% volume)
• Charging dock usage time: about 2.5 additional charges for the headset
• Call: Support ENC call noise reduction
• Headset waterproof rating: Ip55
• Headset weight: 32g
• Charging dock weight: 29g

STORAGE AND MAINTENANCE

The headset is splash-proof, but not completely waterproof. Please do not immerse the earphones in water. The new warnings that our company’s products have obtained the NCC low-power radio frequency equipment certification are as follows: Low-power radio frequency equipment that has obtained an audit certificate, not approved by the company, trade name or use It is not allowed to change the frequency, increase the power or change the features and functions of the original design without authorization. The use of radio frequency equipment shall not affect flight safety and interfere with legal communications;

• Listening to music at high volume may damage your hearing and the sound may be distorted.
• After storing for a long period of time, please recharge it before use. Keep the charging dock dry before charging Drying reduces the risk of damage to the headset
• Note that placing it in an environment that is too cold, too hot or too humid may shorten the life of the battery. Keeping the charging dock dry before charging reduces the risk of damage to the headset
• Charging dock’s charging voltage/current is 5V/1A.

www.kaiboaudio.com

FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>