kaiboaudio KAIBO BUDS True Wireless Bone Conduction Earbuds User Manual

June 5, 2024
kaiboaudio

kaiboaudio KAIBO BUDS True Wireless Bone Conduction Earbuds-
logo

kaiboaudio KAIBO BUDS True Wireless Bone Conduction Earbuds

Thank you for purchasing a pair of Kaibo Buds! To give us feedback, find out more about upcoming product releases, and join our growing community, please connect with us on social media!

What’s in the box

kaiboaudio KAIBO BUDS True Wireless Bone Conduction
Earbuds-fig1 kaiboaudio KAIBO
BUDS True Wireless Bone Conduction Earbuds-fig2

Note: The pictures in this manual are all schematic diagrams, which may deviate from the actual product; please refer to the actual product.

FIT

Use the custom fit accessories to find your best fit. The buds come with the medium size ear hooks attached. Ear hooks and ear hook covers easily snap on and off.kaiboaudio KAIBO BUDS True Wireless Bone Conduction Earbuds-
fig3

  • With ear hooks and ear fins kaiboaudio KAIBO BUDS True Wireless Bone Conduction Earbuds-fig4
  • With ear hook caps and ear fins

CHARGE

Remove the stickers covering the charging connectors (on the underside of each bud) and place them back in the case. We recommend fully charging before your first use. Charging is complete when the LED light on the case stops blinking red. kaiboaudio KAIBO BUDS True Wireless Bone Conduction Earbuds-
fig5

Note: for more detailed instructions on how to set up your Kaibo Buds. please visit www.kaiboaudio.com/usermanual.

PAIR
To pair with a Bluetooth device, open the case and check that the LED lights on both buds are blinking. If not. press the Smart Touch area of that bud for 5 seconds until it turns on. Close and re-open the case to make sure both buds are ready to pair. On your Bluetooth device’s settings, the buds will appear as Kaibo Buds Wave 1.

CONNECT

Use one or both buds to listen and stay connected as you move through your day!

Product Care & Use

The headphones are sweat and water-resistant but are NOT waterproof. DO NOT submerge the headphones in water. Do not charge your headphones immediately after exercising, as any sweat or moisture inside the charging port could lead to circuit burning. Keep the headphones away from strong magnets and magnetic fields, as this could adversely affect the bone conduction transducers. After storing the headphones for an extended period without use, fully charge the headphones before using them again. Store headphones and charging case in a cool and dry place. Keep the charging port inside the case dry to reduce the risk of damage.

LED Indicator Guide

Charging Level

Case| Blinking Red

None

| Charging

Fully charged

---|---|---
Earbuds| Red

None

| Charging

Fully charged

Battery Level

Bluetooth Pairing

Smart Touch Guide

Mode Function Operation

Music

| Play/Pause Music| Double TAP on left or right bud
Play Previous| PRESS left bud for 2 seconds
Play Next| PRESS right bud for 2 seconds


Calls

| Answer/End Call| Double TAP on left or right bud
Decline Incoming Call| PRESS left or right bud for 2 seconds




Set-Up

| Turn On| PRESS each bud for 5 seconds (left and right buds need to be turned on separately)
Turn Off| PRESS left or right bud for 5

seconds

Remove Existing Bluetooth Connections| From the Turn Off state, PRESS left or right bud for 1 0 seconds

Note: A TAP is a short and quick touch, whereas a PRESS is a longer touch and hold.

Voice Notifications

  • Power on
  • Power off
  • Battery low
  • Connected • connected to Bluetooth device Disconnected • disconnected from Bluetooth device

WARNING

While bone conduction headphones are safer than traditional headphones, they are primarily audio devices and make no claim to prevent harm or danger. To prevent possible hearing damage or loss, do not listen at high volume levels for long periods of time, and comply with your local laws and regulations around driving with headphones.

Technical Specification

Model Number Kaibo Buds
Speaker Driver Bone Conduction Transducer
Bluetooth Version 5.0 Channel Stereo

Supports Bluetooth dual modes Single and binaural bilateral stereo

****|





|
Microphone Sensi ti vity|

-40dB ± 2dB

Continuous Play Duration| Music Play ~4 hours/ Cal ls ~3.5 hours Standby ~5 days
Compatible Profiles| HFP 1.7, HSP 1.2 , A2DP 1.3 ,

AVRCP 1.6, SPP 1.2, PBAP 1.0

Materials (Exteri or)| Bud (sound chamber) – PC/ABS Ear hook s and fins – Silicone

Charging Case

Battery S00mAH
Time to Full Charge About 90 mins
Weight 50g
Dimensions 7.2 x 5.5 x 2.8 cm 12.s x 2.2 x 1 in
Materials PC/ABS
Charging Capacity Up to 4 full charges
Voltage/Current 5V/1A

Warranty & Product Registration

Your Kaibo Buds come with a 1-year limited warranty, starting from the original purchase date, to cover manufacturing defects under normal use. For more information and to register your headphones, please go to www.kaiboaudio.com/warranty-returns. You will need the serial number (S/N) found on the bottom of the packaging sleeve and a clear image of your receipt or order confirmation.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements.

Still have questions? We’re here to help!
Check out our on line FAQs at www.kaiboaudio.com/support or email support@kaiboaudio.com. 

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals