Signcomplex DL212R 6 Inch LED Smart Retrofit Downlight Instruction Manual
- June 28, 2024
- Signcomplex
Table of Contents
Signcomplex DL212R 6 Inch LED Smart Retrofit Downlight
Specifications :
- Model: 4inch, 6inch
- CCT: 2700K, 3500K, 5000K
- Lumen(lm): Varies based on CCT
- Beam Angle: R-35, G-100, B-15
- LED Type: 2835
- Max Power(w): Varies based on model
- Voltage: AC120V/60Hz
- CRI: 90
- Qty.: 2
- Frequency: 2W
- Control Method: Bluetooth, wifi
Product Usage Instructions
Before Using :
- Read the specifications to ensure the service environment matches the conditions.
- Confirm the applicable power supply.
- Ensure the product switch is off before connecting to the power supply to prevent electric shock.
During Use:
- Operate the product according to the provided guidelines to prevent damage or personal harm.
- Non-professionals should not attempt to maintain the product due to dangerous high voltage.
Maintenance :
- If the exterior cable or wire is damaged, contact the supplier or qualified personnel for replacement to avoid dangers.
FAQ :
-
Q: What should I do if the LED Downlight is not working?
A: Check the power supply, ensure proper connection, and refer to the troubleshooting section in the manual. If issues persist, contact customer support. -
Q: Can I use voice control with this product?
A: Yes, voice control is supported. Please refer to the user manual for instructions on setting up voice control.
LED Smart Retrofit Downlight
DL212R/DL212BR
PARAMETER
NOTICE
- Please read the specification first, to make sure the service environment matches the condition in the specification before using.
- Please confirm the applicable power supply before using.
- Make sure the switch of product is off before connect to the power supply to prevent electric shock.
- Operation against rules may damage your property even harm to your personal safety.
- Dangerous high voltage, Non-professionals are not allowed to maintain the products.
- If the exterior flexible cable or wire is damaged, it must exchange by the supplier, its agent or other similar qualified personnels to avoid dangers.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
RF Exposure Statement: When using the product, maintain a distance of
20cm from the body to ensure compliance with RF exposure requirements.
DIMENSIONS (Unit: inch)
6 INCH LED RETROFIT DOWNLIGHT:
4 INCH LED RETROFIT DOWNLIGHT:
PARAMETER
NOTICE
- Please read the specification first, to make sure the service environment matches the condition in the specification before using.
- Please confirm the applicable power supply before using.
- Make sure the switch of product is off before connect to the power supply to prevent electric shock.
- Operation against rules may damage your property even harm to your personal safety.
- Preliminarily estimate required quantity of LED Downlights, then according to the power rating of single panel light to figure out the total power and design power supply plan.
- Dangerous high voltage, Non-professionals are not allowed to maintain the products.
- If the exterior flexible cable or wire is damaged, it must exchange by the supplier, its agent or other similar qualified personnel to avoid dangers.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
RF Exposure Statement: When using the product, maintain a distance of
20cm from the body to ensure compliance with RF exposure requirements.
INSTALLATION DRAWING
6 Inch LED Retrofit Downlight:
INSTALLATION DRAWING
DL213BR 4inch
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>