Signcomplex SC-2835 Smooth Line Silicone Extrusion Strip User Guide

Signcomplex SC-2835 Smooth Line Silicone Extrusion Strip

Product Information

Specifications

• Model: SC-2835-07-JT1006W-XX-24-238-8-IP67
• Wave Length: WW 2800-3200K, NW 3800-4500K
• Luminous Flux Range(for LED only): 1380lm/m (WW), 1560lm/m (NW)
• CRI : 80
• LED Type : 2835
• LED Qty : 238pcs/m
• Rated Watt : 8W
• Voltage: 24V
• Max. length: 5m
• Min. cut: 29.4mm
• Beam Angle : 120°
• IP Grade : IP67

**Description

**

The SMD Smooth Line Silicone Extrusion is a flexible chip-on-FPC strip that provides uniform and soft light with good linearity, no glare, and high color consistency. It uses smooth line technology instead of COB LED strips, resulting in high efficiency, high brightness, and luminous uniformity. The strip can be easily installed and controlled for light brightness. It is designed to adapt to different scene applications and create an immersive lighting experience.

Features

• Soft light, dot free, linear light
• Extremely flexible and reliable
• High-end vapor phase silicone for good bendability
• IP67 waterproof with excellent sealing performance

Application
The SMD Smooth Line Silicone Extrusion is widely used in hotels, shopping malls, furniture, cabinets, and shelves as decoration lighting, direct lighting, or indirect lighting.

Installation

Installation Diagram

Steps

1. First, fix the fixing clip at the desired location for LED strip installation (refer to Figure 1).
2. Install the LED strip into the fixing clip to complete the installation (refer to Figure 2).

Accessories

• End cap with hole
• End cap without hole
• Mounting clip (2pcs/5m)
• Mounting clip (1m)

Frequently Asked Questions (FAQ)

1. What is the IP grade of the SMD Smooth Line Silicone Extrusion?
   The IP grade of the SMD Smooth Line Silicone Extrusion is IP67, which means it is dust-tight and can be immersed in water up to 1 meter depth for 30 minutes.

2. What is the maximum length of the LED strip?
   The maximum length of the LED strip is 5 meters.

3. Can the LED strip be cut?
   Yes, the LED strip can be cut at a minimum length of 29.4mm.

4. What is the beam angle of the LED strip?
   The beam angle of the LED strip is 120°.

Contact: +86-755-2760 8650
Email: [email protected]
Website : www.signcomplex.com

SMD SMOOTH LINE SILICONE EXTRUSION

Smooth line technology brings new style lighting that instead of using COB LED strips

DESCRIPTION
Flexible chip-on-FPC strip with uniform and soft light, good linearity, no glare, high color consistency, with the controller can achieve light brightness control. Through the control of lighting dynamic effect, it can adapt to different scene application, making immersive feeling.

IP67 WATERPROOF
SMD strip light with silicone extrusion process, providing excellent sealing performance.

APPLICATION

Widely used in hotels, shopping malls, furniture, cabinets, shelf, as decoration lighting, direct lighting or indirect lighting.

SPECIFICATIONS

DIMENSIONS (Unit: mm/inch)

ACCESSORIES

INSTALLATION DIAGRAM

1. First, fix the fixing clip at the place where the LED strip is to be installed, as shown in Figure 1:
2. Install the LED strip into the fixing clip and complete the installation, as shown in Figure 2:

INSTALLATION OPERATION

1. Cut along the cutting line with scissors, as shown in Figure 3.
2. Fill the plug with glue, and put the neon flex into the plug, installation completed, as shown in Figure 4.
3. Cut off the adhesive on the back of the PCB to reveal the welding points, as shown in Figure 5.
4. Use the soldering iron to solder the wire, as shown in Figure 6.
5. Put the wire encased into the plug, and repeat Figure 4 gluing steps, and then insert the neon flex into the plug, installation completed, as shown in Figure 7.

PACKAGING INFORMATION

INSTALLATION REQUIREMENT

• The LED strip and accessories can’t be squeezed or folded.
• PCB conductive parts can’t be damaged during installation.
• Installation must conform to electrical safety standard. The LED strip can only be installed by professionals.
• Ensure power supply transform operating load with transformer.
• When installing on metal or conductor surface, insulation protection need to be provided to the contact area.
• Observe positive and negative polarity, ensure correct connection to avoid damaging LED strip.
• During installation, please prevent static electricity.
• The product need anti-corrosion environment, such as, avoiding damp, water drop or other adverse elements.

References

• Signcomplex Led Lighting Company, LED Panel Light, Linear Light, LED Downlight, LED Tube, etc.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>