Signcomplex SC-SSE041028-128-WW-24 Ultra-Narrow Neon Installation Guide

Signcomplex SC-SSE041028-128-WW-24 Ultra-Narrow Neon

Product Information

The SC-SSE041028-128-WW-24 is an ultra-narrow neon flex available in various colors including RGB, RGBIC, W, WW, NW, R, G, and B. The product offers soft light and good flexibility and plasticity due to the use of high-end vapor phase silicone. It has passed CE, RoHS, and other certifications and offers good waterproof effect for safer application. It is widely used in hotels, shopping malls, furniture, cabinets, bookshelves as decorative lighting, direct lighting, or indirect lighting. The product has a 2835 LED type with a rated watt of 7.7W/m and a beam angle of 120 degrees.

Product Usage Instructions

Installation Diagram

Installation Operation

Option 1

1. Fix the clip in the place where the neon flex will be installed (refer to Figure 1).
2. Install the neon flex into the clip (refer to Figure 2).

Option 2

1. Cut along the cutting line with scissors (refer to Figure 3).
2. The plug will be filled with glue, put the neon flex into the plug (refer to Figure 4).
3. Cut off the adhesive on the back of the PCB to reveal the welding points (refer to Figure 5).
4. Use the soldering iron to solder the wire (refer to Figure 6).
5. Put the plug encased into the line, repeat Figure 4 gluing steps, and then insert the neon flex into the plug (refer to Figure 7).

Bending Direction and Bending Radius:

The SC-SSE041028-128-WW-24 can be bent in the luminous surface direction with a minimum bending radius of R30.

Packaging Information:

• LED strip part number: SC-SSE041028128-WW-24
• Anti-static bag gross weight per reel: 0.098KG
• Packing box quantity per carton: 50
• Packing box gross weight size: 13.25KG, 23.2312.798.3 cm

Product Information

Ultra-narrow
Dimension:4×10mm, suitable for ultra-narrow spaces

Soft Light
Various LEDs are available, more uniform luminescence. No light dot can be seen even in close distance soft light.

Good flexibility and plasticity
High-end vapor phase silicone, strong weather resistance, no yellowing, good softness and plasticity.

Waterproof and safer application

The product has passed CE, RoHS and other certifications, good waterproof effect, safer application.

Application

Widely used in hotels, shopping malls, furniture, cabinets, bookshelves, as decorative lighting, direct lighting or indirect lighting.

PARAMETER

Model| Wave Length & CCT Range(for LED only)| Luminous Flux (lm/M)| CRI| LED Type| LED Qty. (PCS/M)| Rated Watt (w/m)| DC Voltage (V)| Max. Length (M)| Min. Length (mm)| PCB Width| IP| Beam angle (degree)
---|---|---|---|---|---|---|---|---|---|---|---|---
SC-XX-128-XX-24| WW| 2800-3200K| 257| 80| 2835| 128| 7.7| 24| 5| 62.5| 6| 65| 120
NW| 3800-4500K| 299
W| 6000-6500K| 333
R| 620-630nm| | \
G| 515-530nm
G| 460-470nm

ACCESSORIES

DIMENSIONS (unit: mm)

INSTALLATION DIAGRAM

Installation operation

1. Fix the clip in the place where the neon flex installed, as shown in Figure 1.
   

2. Install the neon flex into the clip, the installation is complete, as shown in Figure 2.

3. Cut along the cutting line with scissors, as shown in Figure 3.

4. The plug will be filled with glue, and put the neon flex into the plug, the installation is complete, as shown in Figure 4.

5. Cut off the adhesive on the back of the PCB to reveal the welding points, as shown in Figure 5.

6. Use the soldering iron to solder the wire, as shown in Figure 6.

7. Put the plug encased into the line, and repeat Figure 4 gluing steps, and then insert the neon flex into the plug, the installation is complete, as shown in Figure 7.

Bending direction and bending radius

PACKAGING INFORMATION

Size(cm/inch)
SC-SSE041028- 128-WW-24| 0.098KG| 50| 13.25KG| 59cm32.5cm21.1cm 23.23″12.79″8.3″

INSTALLATION REQUIREMENT

• The LED strip and accessories can’t be squeezed or folded.
• PCB conductive parts can’t be damaged when installation.
• Installation must conform to electrical safety standard. The LED strip can only be installed by professionals.
• Ensure power supply transform operating load with transformer.
• When install on metal or conductor surface, insulation protection need to be provided to the contact area.
• Observe positive and negative polarity, ensure correct connection to avoid damaging LED strip.
• When installation, please prevent static electricity.
• The product need anti-corrosion environment, such as, avoiding damp, water drop or other adverse elements.

References

• Signcomplex Led Lighting Company, LED Panel Light, Linear Light, LED Downlight, LED Tube, etc.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>