Signcomplex HTT0913AL Smart LED Lamp User Manual
- June 6, 2024
- Signcomplex
Table of Contents
Smart LED Lamp
User manual
Description
The smart bulb lamp adopts 2.4G Bluetooth control and can perform RGB brightness, color change or cold/warm white light brightness or color temperature nonpolar change. It saves more energy when realizing the artificial smart lighting.
Reset the lamp
After the product is connected to the power supply, turn off, on, off, on,
off, on, The interval between on and off is 2-3s, the light turns into a white
light slow flashing state,
and the reconfiguration network enters the successful reset state.
How to control
Control the Bulb light by APP with your Phone and Ipad， See the spec for app.
Dimension
| Can realize timing control
---|---
Can realize remote control
Compatible with Android and IOS
Can adjust CCT and brightness of white light
Can realize group control.
Parameters
Power Supply: 100V~132Vac, 50/60Hz, 0.15A(Max)
Power: 9W/ 11W/ 13W
Wireless type: 2.4 GHz
Notice
- When the light is configuring the network, turn on both Bluetooth and wifi, which can speed up the speed of network distribution and improve the success rate of network distribution.
- Please confirm the applicable power supply before using it.
- Make sure the switch of product is off before connecting to the power supply to prevent electric shock.
- Operation against rules may damage your property or even harm your personal safety.
- Dangerous high voltage, Non-professionals are not allowed to maintain the products.
Only use the control provided with or specified by these instructions to control this lamp. This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.