finder 8A.58 OPTA Expansion Module User Guide
- June 28, 2024
- finder
Table of Contents
finder 8A.58 OPTA Expansion Module
- 8A.58.9.024.1600 EMR output version
- 8A.88.9.024.1600 SSR output version
DIMENSIONS
WIRING DIAGRAM
-
* 2a Type 8A.58 EMR (Electromechanical Relays)- 2b Type 8A.88 SSR (Solid State Relays)
FRONT VIEW
- 3a Power supply terminals 12…24 V DC
- 3b I1….I16 digital/analog input terminals (0…10 V) configurable via IDE
- 3c Power LED
- 3d Output terminals 1…8
- EMR type 8A.58.9.024.1600 NO contacts (SPST) 10 A 250 V AC
- SSR type 8A.88.9.024.1600 NO contacts (SPST) 2 A 24 V DC
- 3e Contact status LED 1…8
- 3f Port for communication and connection of auxiliary modules
IMPORTANT
The expansion modules must be powered according to 3a and can operate
exclusively in conjunction with an Opta controller which can connect up to 5
expansion modules in a daisy chain. The autonomous operation of the expansions
is not envisaged.
GETTING STARTED GUIDE
https://docs.arduino.cc/hardware/opta/
GETTING STARTED – IDE
If you want to program your OPTA while offline you need to install the Arduino Desktop IDE, Arduino Cloud or Arduino PLC-IDE. To connect the OPTA to your computer, you’ll need a USB cable. https://www.arduino.cc/en/Main/Software
GETTING STARTED – ARDUINO CLOUD
All Arduino IoT-enabled products are supported on Arduino Cloud which allows you to Log, graph and analyze sensor data, trigger events, and automate your home or business. The Arduino Cloud is hosted online, therefore it will always be up-to-date with the latest features and support for all boards. Follow to start coding on the browser and upload your sketches onto your board. https://cloud.arduino.cc
NOTE
If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
NOTE
This equipment has been tested and found to comply with the limits for a Class
A digital device, under part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used by the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense.
Utility Model – IB8A58VXX – 05/24 – Finder S.p.A. con unico socio – 10040
ALMESE (TO) – ITALY
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>