Ailofy AIBC-A Smart LED Light Bulbs User Manual
- June 4, 2024
- Ailofy
Table of Contents
Ailofy Bulb Color
SPECIFICATION
| Model: AIBC-A | Size: 60x60x113mm |
|---|---|
| Rated power: 9 Watts | Lumens: 800 Lumens |
| Working voltage: 120V~60Hz | Base type: E26 |
Life expectancy: 25,000 Hours
Compatibility: Android 5.0+, iOS 9.0+
Communication mode: 802.11 b/g/n, 2.4 GHz Bluetooth| Color temperature: 2700K
– 6500K
Connect
-
Download the Ailofy app from your app store and sign up for a new account.
-
Follow the instructions in the Ailofy app to set up.
-
Open the Ailofy app and tap the + sign on the top right corner of the My Home tab. Tap Add Device and then select Ailofy bulb color.
Connecting To Your Voice Assistant
Alexa
-
Open the Ailofy App, enter your Account settings, and tap Smart Integrations.
-
Tap Alexa to bind your Ailofy account.
-
When binding successfully, you can control your Ailofy lights via Alexa.
Google Home -
Open the Googe Home App, and log in to your account.
-
Tap Set up device.
-
Tap Works with google.
-
Search the Ailofy device listing and log in with our Ailofy account.
-
Wait a few more seconds, and you’re done.
Precautions
-
Make sure that the power is off when installing or removing the light
bulb. -
Do not use this product with a dimmer (e.g. a desk lamp with a
dimmer switch) to avoid damaging the product. -
Risk of electric shock – Do not use where directly exposed to water.
-
Do not use in a narrow or poorly ventilated light fixture.
-
Not for use in totally enclosed luminaire.
-
Not for emergency lighting.
FCC Warning
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body.
NEED HELP?
Service Email:support@ailofy.com
Service URL:www.ailofy.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>