Cubitt T61 Open Earbuds User Manual
- June 28, 2024
- Cubitt
Table of Contents
User Manual Open Earbuds
Gen2
Bluetooth V5.3
Support IOS & Android System 
Operation Guide
| One Touch:| Play/Pause/Answer/Hang Up
---|---|---
| Long Touch 2 Seconds:| Power On/Rejection/Voice Assistant
| Touch 4 times:| Game Mode
| Long Touch 5 Seconds:| Power Off
| Double Touch:
Triple Touch:| Volume Down
Prev Song
| Double Touch:
Triple Touch:| Volume Up
Next Song
| Game mode:| When Earbuds are connected with the phone, touch the L or R
earbud for 4 times. When hear a “game mode” voice prompt, you have entered the
game mode. Touch the L or R earbud 4 times again, hear “game mode off ” to
exit game mode.
Note: Turn on game mode, the RF signal will deteriorate!
Connection
Forcibly Cleared：
When take out the earbuds, it will directly connect with the old device. Just
tap the L or R earbud 5 times to hear a “du” Sound. The old device connection
is forcibly cleared. After the clearing, the earbuds will enter to the waiting
state, other devices can find it and connect it too.
Easy Pairing
- Put the Left and Right earbud into the charging box to wake it up; When the LED indicators indicating White and charged normally, the earbuds are activated!
- Take the Left and Right earbus out of the charging box, The earbuds’s LED indicator lights up white and will flash quickly, The earbuds pair together automatically and the LED indicator will flash slowly.
- Open the Bluetooth setting on your device and connect to “Cubitt Reebok Open Earbuds” The LED indicators turn off to confirm the pairing was successful. Note: If Needed, Please Off the Earbuds to Repeat the above Steps to Re-Pairing Again.
- Auto Power On/Off:
Two earbuds will power on automatically once you take it out rom the charging box; And will auto power off when you put it back to the charging box.
Note: The earbuds will power off automatically after 5 minutes if they have not been paired with a device via Bluetooth.
Charging Diagram
| Power Level | Light Indicate |
|---|---|
| 0-25% | Flash 1 times |
| 25-50% | Flash 2 times in a row |
| 50-75% | Flash 3 times in a row |
| 75-100% | Flash 4 times in a row |
Earbuds
When Charging: Earbuds bright white lights,
Charging box White light out.
Full Charge: Charging box light turns off
Charging time: 1.5 hour
Low Battery: White light flash slowly and warning
Charger Box
Charging Time: 2.5hours
Product Detail
Packing
Detail:
Earbuds
Charging Box
Charging Cable
User Manual
Gift Box & EVA Tray
Multi – Device Operation Guide
Wearing Diagram
Specification
| Pairing Name: | Cubitt Reebok Open Earbuds |
|---|---|
| Bluetooth Version: | V5.3 |
| Charging Voltage: | 5V |
| Li-Battery: | 3.7V/60mAh |
| Playing Time: | 6.5H(Base on 50% Volume) |
| Charging Time: | 1.5 Hour for earbuds |
| Profile Support: | HSP/HFP/A2DP/AVRCP |
| Sensitivity: | 97±3dB |
| Charging Box Input Power: | DC=5V 1000mA |
| Charging Box Output Power: | DC=5V 100mA |
| Charging Box Li-Battery: | 3.7V/500mAh |
| Charging Hole: | USB Type C |
| Charging Box Charger Time: | 2.5 Times |
FAQ:
Cellphone can not search the Bluetooth earbuds
Delete all Bluetooth pairing names stored on the phone, and search again.
The earbuds sound is jammed or disconnected when talking or playing music
- Cellphone & Bluetooth earbuds have large areas of shielding, such as walls.
- Low power of TWS Earbuds. 3) The distance between cellphone and TWS earbuds is more than 10 meters.
When L & R earbud can not connected together
Touch the L and R Earbud 6 times at the same time to pair directly together
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
- RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.