HOMPANY SmartVac 13 Cordless Vacuum Cleaner User Manual
- June 17, 2024
- HOMPANY
Table of Contents
- WHAT IN THE BOX
- INTRODUCTION TO MAIN BODY
- DISPLAY SCREEN INTRODUCTION
- COMBINATION METHOD
- WALL MOUNTING
- CHARGING METHODS
- INSTRUCTIONS FOR USE
- MAINTENANCE AND MAINTENANCE OF PRE-FILTER COMPONENTS
- POST FILTER COMPONENT CLEANING
- FLOOR BRUSH CLEANING
- ACCESSORIES INSTRUCTIONS
- SPECIFICATION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CORDLESS VACUUM CLEANER
USER MANUAL
SmartVac 11
WHAT IN THE BOX
INTRODUCTION TO MAIN BODY
- One – click Clear button – (Handle end)
- Switch
- Speed control
- LED digital display
- Dust cup removal
- One – click Clear button(Dust cup end)
- Dust cup
- Outlet air filter
- Battery pack release button
- Battery Pack
- Cyclone filter
- Metal tube locker
- Telescopic rod
- Telescopic rod adjustment locker
- Floor brush – telescopic rod removal locker
- Power brush
- Power brush roller
- Host machine
DISPLAY SCREEN INTRODUCTION
A. Floor brush blocked indicator
B. Electric quantity
C. Suction mode indicator (MID/MAX/MIN)
D. Charge and discharge colored lights
E. Full cup reminder
COMBINATION METHOD
WALL MOUNTING
CHARGING METHODS
- Please use HOMPANY special adapter to charge the product
- For first time use, it is recommended to fully charge the product before use.
- Please charge it in time after each use. It is not recommended to completely drain the battery before charging.
INSTRUCTIONS FOR USE
-
Start up
1.1 Press the power button to start working1.2 Real-time display of remaining power and gear status, with the power display decreasing every 5% The remaining power is for reference only. There may be a certain deviation from the actual time in different modes and environments.
-
Suction power level adjustment
2.1 Press to adjust the gear during work2.1 Gear adjustment light display
2.2 Low battery light display
When the battery power is lower than 15% during work, the display number starts to flash, and the power is about to be exhausted. -
Shut down
3.1 Press the power button again during work to complete the shutdown.1.2 When the power is turned off, the screen numbers will still flash for a certain period of time, indicating that the battery level is less than 30% at this time. To ensure sufficient time for next use and battery cycle life, please connect the adapter to charge as soon as possible.
-
Fault light display – full of dust
When the trash can sign lights up, it means the product is blocked. Please remove the main unit, floor brush, and pipes for cleaning and inspection. -
Fault light shows – the floor brush is entangled
When the please wrap sign lights up, it means that the floor brush roller is stuck. Please pick up the floor brush, remove the roller, clean and check
MAINTENANCE AND MAINTENANCE OF PRE-FILTER COMPONENTS
-
Clean the Main Body
Please use a soft dry cloth to wipe the main unit, do not wash it with water -
Dust cup maintenance
Remind: If used for a long time, it is recommended to clean and maintain once a month.
2.1 Dust cup is full -
Inlet air filter HEPA maintenance
Remind:
HEPA does not recommend cleaning. Just use a cleaning brush to clean it regularly.
If used for a long time, it is recommended to clean the HEPA air inlet filter every 2 weeks and replace it every 2 months to ensure long-term good suction.
3.1 Inlet air filter HEPA take out3.2 Inlet air filter HEPA cleaning
-
Cyclone filter maintenance
Remind: If used for a long time, it is recommended to clean and maintain once a month.
4.1 Inlet air filter HEPA take out
4.2 Cyclone filter disassembly4.3 Cyclone filter cleaning
-
Filter component installation
-
Replacing the dust cup filter assembly
-
Dust cup installation
POST FILTER COMPONENT CLEANING
- Post filter component cleaning
Remind: If used for a long time, it is recommended to clean it every six months and replace it every year.
1.1 Removing the air outlet cover1.2 Air outlet HEPA
disassembly
1.3 Air outlet HEPA cleaning
1.4 Air outlet HEPA installation
1.5 Installation of air outlet cover
FLOOR BRUSH CLEANING
Notes for the Vacuum
Before cleaning the floor brush, be sure to remove the floor brush from the
main unit and disconnect the power supply.
-
Clean Host machine
Please use a soft dry cloth to wipe the main body, do not wash it with water -
Open the buckle
-
Take out the roller
-
Clean wrap and Washable roller
-
24 hours to dry
-
Install rollers and Press the buckle
ACCESSORIES INSTRUCTIONS
-
Long Crevice Nozzle
Suitable for cleaning small gaps such as doors, windows, dead corners of stairs, etc. -
2-in-1 Brush
Suitable for cleaning sofas, furniture, keyboards, etc. -
Motorized Brush Head
SPECIFICATION
Product | Cordless Vacuum Cleaner |
---|---|
Model | SmartVac 13 |
Rated Voltage | 25.9V **** |
Cleaning Modes | MID/MAX/MIN |
If you have any questions, please email to support@hompany.top
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>