Teufel ROCKSTER GO 2 Portable Speaker for Outdoor Instruction Manual

: July 10, 2024
: Teufel

Table of Contents

Teufel ROCKSTER GO 2 Portable Speaker for Outdoor
Product Usage Instructions
Frequently Asked Questions
Scope of delivery
Charging
Volume and playback
Technical data
FCC statement
Contact
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Teufel ROCKSTER GO 2 Portable Speaker for Outdoor

Product Specifications:

Dimensions: 6.9 dBm/4.9 mW
Weight: 1.62 lbs (735 g)
Power Output: 2.5 – 13.5 W
Charging: 5 V, max. 3 A
Protection Class: IP67
Storage Temperature: From – to

Product Usage Instructions

Charging:

To charge the device, use the provided charging cable and connect it to a power source with an output of 5V and a maximum of 3A. Make sure to fully charge the device before first-time use.

Bluetooth Pairing:

Turn on the device by pressing the power button.
Activate the Bluetooth function on your smartphone or tablet.
Search for available Bluetooth devices and select “ROCKSTER GO 2” from the list.
Once paired, you will hear a confirmation sound, indicating a successful connection.

Volume and Track Control:

Adjust the volume by using the volume buttons on the device. To change tracks, use the track control buttons located on the device.

Party Link Feature:

The Party Link feature allows you to connect multiple devices for a synchronized audio experience. Follow the device-specific instructions to set up Party Link mode.

Frequently Asked Questions

Q: How do I reset the device?
- A: To reset the device, press and hold the power button for 10 seconds until you hear a sound indicating the reset.
Q: What is the IP rating of the device?
- A: The device has an IP67 rating, making it dust-tight and protected against immersion in water up to 1 meter for 30 minutes.

Scope of delivery

Portable Bluetooth® speaker with lithium battery

Charging

Volume and playback

Technical data

Dimensions (W x H x D)| 8.3 in × 4.6 in × 2.5 in

(210 mm x 108 mm x 62.5 mm)

---|---
Weight| 1.62 lbs (735 g)
Charging voltage| 5 V, max. 3 A
Required power of the charging unit (min. – max.)|

Protection class|

IP67

Operating temperature (from – to)| 32°F – 113°F

(0 °C – +45 °C)

Storage temperature (from – to)| -4°F – +140°F

(-20 °C – +60 °C)

Frequency bands|

2400–2483.5 MHz

Transmitting power|

6.9 dBm/4.9 mW

Trademarks

© All trademarks and brand names are the property of their respective owners. Bluetooth® is a registered trademark of the Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.

FCC statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement.

Caution!

Any changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.

Hereby, Lautsprecher Teufel GmbH declares that the radio equipment type FENDER® x TEUFEL ROCKSTER® GO 2 is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of Conformity is available at the following internet address: