Cubitt ANC6078A Active Noise Cancelling Headphone User Manual

User Manual
Item:Cubitt Headphones

Overview

1. Microphone
2. ANC Switch
3. LED Indicator
4. Type C charging port
5. 3.5mm Line in Socket
6. Volume Down/Previous Track
7. Play / Pause / Voice assistant
8. Volume Up/Next Track
9. Power Switch/Exit Device

Use

Power Switch :
Power On: Press and hold the power button until the Status LED blinks blue and red.
Power Off : Press and hold the Power button off. The headphone is now turned off.
Exit The Device : Triple press the power button until the Status LED blinks blue and red. again until the Status LED blinks red and ****to forcibly exit an existing device .

Multifunction button ****:

Short Press : Play /pause when music playing or answer the phone call .
Long Press : Reject the phone call .
Double Click : Redial the last call.
Triple Click: Activate the voice assistance.
Wireless Music Mode :
GED Short press – to volume down. Short press + to Volume up .
Long press – to play the previous song Long press + to play the nex song
ANC Switch :
(1); ANC on: Slide the ANC switch up, the LED indicator will light up in Green, ANC on. ANC off : Slide the ANC switch down, the ANC LED light will turn off and ANC off.
Connection : Step 1: Open the Bluetooth setting on your phone or tablet and click”search device ” 1phone’ s will search for Bluetooth devices a utmatically. Step 2: You have found the product when the screen displays the character “Cubitt Headphones”,Click on it in your device to pair the connection . Step 3: The phone or tablet will indicate when the pairing is successful. The character on the display of the product will stop flickering . Note: If no Bluetooth devices are paired within 5 minutes the headphone will turn off.
Charging : Pleas make sure the product is fully charged for the first use . Charge the product with the provided Type C ca bl which is compatibl with any computer or other 5v output charger. The charge Bluetooth indicator wil be in red and while charging, then when the battery is fully charged it will turn off . The LED will flash red if the battery level is low. Note: when connected to a charging source, the bluetooth function of the headphone will be stopped, but the ANC can work.
Line-in: Turn off the bluetooth and connect the headphone and device via the audio cable. One end connects the device; the other end connects the audio input socket(5). Note: You must turn the headphone off before connecting the cable if the Bluetooth mode has been activated. If the battery is depleted, the noise cancellation must be turned off if you want to use the 3.5mm audio cable

Specifications

TIPS：

1. Charging time : about 2 hours

2. When using for the first time , charging for more than 1-2 hours is good for battery .

3. Please charge the product if the product hasn’t been used for a long time (more than one month )

4. Please keep away from fire and water .

5. To prevent possible hearing damage,do not listen at high volume levels for long periods .
   Do not use the headset while driver or cycling or in an situation where you should be able to hear other sounds. As a guide to setting the volume level ,check that you can still hear your own voice , when speaking normally while listening with the headset .

6. This product contains a rechargeable Li-on battery and the battery can not be replaced .

Customer Service
We are here to help!
For any customer service assistance or warranty issues, please scan the following QR code

https://linktr.ee/cubitt_official?utm_source=qr_code

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>