PRO1 T771 Programmable Electronic Thermostat Instructions

June 28, 2024
PRO1

PRO1 T771 Programmable Electronic Thermostat

Specifications

  • Model: Pro1 Thermostat
  • Power Source: 2 AA 1.5v batteries
  • Display: LCD
  • Operating Temperature: Recommended above 40 degrees Fahrenheit

Product Usage Instructions

  • Thermostat Quick Reference
    • The thermostat quick reference provides an overview of key features:
    • 1. LCD Display: Shows room temperature and setpoint temperature.
    • 2. Glow in the Dark Light Button: Illuminates the display.
    • 3. Fan Switch: Choose between ON (continuous) or AUTO (cycles with heating/cooling).
    • 4. System Switch: Turn the HVAC system ON or OFF for heating or cooling.
    • 5. Temperature Setpoint Buttons: Adjust room temperature using the + or – buttons.
  • Battery Information
    • Important: Replace batteries when the low battery indicator is displayed. For extended battery life in temperatures below 40 degrees, use 1.5V AA lithium batteries instead of alkaline. To replace batteries:
    • Use the finger bevel to open the battery door.
    • Replace with 2 AA 1.5v batteries.
    • Refer to the instructions on the back of the battery door.
  • Operating Instructions
    • Caution: When the low battery icon appears, replace AA batteries immediately to prevent system failure.
    • LCD Display: Refer to page 2 for display details.
    • Glow in the Dark Light Button: Press to illuminate the display.
    • Fan Switch: Select ON for continuous fan operation or AUTO for cycling with heating/cooling.
    • System Switch: Turn the HVAC system ON (for heating/cooling) or OFF.
    • Temperature Setpoint Buttons: Adjust room temperature using the + or – buttons.
  • Contact Us and Warranty Information
    • For assistance, contact Pro1 Customer Care at
    • Toll-free: 888-Pro1iaq (776-1427)
    • Web: www.pro1iaq.com
    • Hours: Mon-Fri 9 AM – 6 PM Eastern

FAQs

  • Q: What should I do if my thermostat display shows a low battery indicator?
    • A: Replace the AA batteries immediately to prevent system failure. Use 1.5V AA lithium batteries for extended life in colder temperatures.
  • Q: How can I adjust the room temperature on the thermostat?
    • A: Press the + or – buttons on the thermostat to set the desired room temperature.

This manual covers the following models:

  • T771

Caution: Equipment damage hazard Do not operate the cooling system if the outdoor temperature is below 50˚ F (10˚ C) to prevent possible compressor damage.

Need Help?

For assistance with this product please visit http://www.pro1iaq.com or call Pro1 Customer Care toll-free at 888-Pro1iaq (776-1427) during normal business hours (Mon-Fri 9 AM – 6 PM Eastern) Una versión española de este manual puede ser descargada en www.pro1iaq.com. ® U.S. Registered Trademark. Patents pending. Copyright © 2009 Pro1 IAQ, Inc. All rights reserved. Rev. 0906

THERMOSTAT QUICK REFERENCE

Getting to know your thermostat

  1. LCD
  2. Glow in the Dark Light Button
  3. Fan Switch
  4. System Switch
  5. Easy Change Battery Door
  6. Temperature Setpoint Buttons

Important: The low battery indicator is displayed when the AA battery power is low. If the user fails to replace the battery within 21 days, the thermostat display will only show the low battery indicator as a final warning before the thermostat becomes inoperable.
NOTE: In applications where the thermostat will see temperatures below 40 degrees it is recommended that 1.5V AA lithium batteries be used instead of alkaline for increased battery life. (Extreme temperatures decrease the life of Alkaline batteries.)

Battery door information

THERMOSTAT OPERATION

Easy to use controls

  1. LCD Display: See page 2 for details about this display read out.
  2. Glow in the Dark Light Button: The glow in the dark light button will self illuminate for several hours after exposure to ambient light. This button turns on the display light when pressed.
  3. Fan Switch: If your system has a fan, select ON or AUTO. ON will run the fan continuously. AUTO will cycle the fan on only when the heating or cooling system is on.
  4. System Switch: Selects the operation mode of your HVAC system. Selecting ON turns on either the heating or cooling. Selecting OFF turns off heating or cooling. Your thermostat is configured for either heat or cool.
  5. Temperature Setpoint Buttons: Press the + or – buttons to select the desired room temperature.

Caution: When the battery icon appears replace your AA batteries immediately. Failure to do so may result in your heating & cooling system becoming inoperable.

CONTACT US AND WARRANTY INFORMATION

Contact Us Information

  • Pro1 IAQ Inc. 1111 S. Glenstone Suite 2-100 Springfield, MO 65804
  • Toll-free: 1-888-Pro1iaq (776-1427)
  • Toll Number (Outside the USA): 330-821-3600
  • Web: http://www.pro1iaq.com.
  • Hours of Operation: Monday – Friday 9 AM – 6 PM Eastern

Warranty Registration:

Your new Pro1 thermostat has a 5 year limited warranty. You must register your warranty within 60 days of installation. You can register your new thermostat in 2 ways.

  1. Go to www.pro1iaq.com, select warranty registration and fill out a short registration form. – or –
  2. Complete the form below and mail it to the address shown.

Pro1 IAQ Warranty Registration:

  • Name: ____
  • Address: ____
  • City: ____
  • State: ____
  • Zip: _____
  • Thermostat Model: _____
  • Date Installed: _____

Complete form and mail to:

  • Pro1 IAQ Inc.
  • 1111 S. Glenstone
  • Suite 2-100
  • Springfield, MO 65804

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

PRO1 User Manuals

Related Manuals