KEF UXD21002 Sound System User Guide

KEF UXD21002 Sound System

Introduction

Thank you for choosing KEF. KEF is dedicated to producing premium audio products with best-in-class sound quality to give you an engrossing and pleasurable listening experience that is true to the original performance. Please read the important safety and warranty information below. For any other services, please contact your local authorised KEF distributor, whose details can be found at www.kef.com

IMPORTANT SAFETY INFORMATION

• Follow this manual carefully for the best results from your speakers
• Read and return the warranty card
• Clean with a dry lint free cloth
• Do not use spirit based cleaners
• Avoid damp
• Avoid temperature extremes
• Avoid direct sunlight
• SAFETY NOTICE! Trailing cables are dangerous, secure all cables

WARNING

• TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE
• Keep new and used batteries away from children.
• If the battery compartment does not close securely, stop using the product and keep it away from children.
• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention
• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
•  The appliance should be connected to a mains socket with a protective earthing connection.
•  Refer to the information on the underside of the enclosure for electrical an safety information before installing or operating the appliance..

CAUTION

• RISK OF ELECTRIC SHOCK DO NOT OPEN
• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
• A combined mains power input lead and country specific mains plug is provided.
•  Check before connecting to your local mains supply that the local supply voltage is the same as that marked on the rear panel.
• If it is not, check with your supplier before proceeding.
• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type

Explanation of Graphical Symbols

• The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the products enclosure that may be of a sufficient magnitude to constitute a risk of electrical shock to persons.
• The exclamation mark within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
• Correct Disposal of This Product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Electro-Magnetic

The normal function of the product may be disturbed by Strong Electro-Magnetic Interference. If so, simply reset the product to resume normal operation by following the instruction manual. In case the function could not resume, please use the product in other location.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

•  this device may not cause harmful interference
•  this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate. Caution! Any changes or modifications not express

IC Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

•  This device may not cause interference.
•  This device must accept any interference, including interference that may cause undesired operation of the device.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

• Product Type
  • Wireless Speaker
• Radio Frequency – Frequency Range
  • Bluetooth: 2402-2480 MHz
  • Wi-Fi Network*: 2412-2472 MHz, 5180-5240 MHz, 5260-5320 MHz, 5500-5700 MHz, 5745-5825 MHz
  • Proprietary Interspeaker Connection*: 2406-2474 MHz
  •  DFS mode and available channels depend on various countries’ regulations
• Radio Frequency – Power
  •  Bluetooth: 17 dBm EIRP max.
  • Wi-Fi Network: 17 dBm EIRP max. (2.4 GHz), 15 dBm EIRP max. (5 GHz)
  • Proprietary Interspeaker Connection: 15 dBm EIRP max.
• Note: The product follows the European Union Energy Legislation
•  The product consumes less than 2.0W in network standby mode.
•  The product can enter network standby mode from any working modes, including Wi-Fi, Bluetooth, TV (HDMI), Optical, USB and Aux modes.
•  The product can be activated from network standby mode by app, remote control or Wi-Fi audio signal.
•  Wi-Fi mode can be deactivated by an active network cable connection

Important Safety Instructions

•  Read these instructions.

•  Keep these instructions – for future reference.

•  Heed all warnings – on the product and in all product documentation.

•  Follow all instructions.

•  Do not use this apparatus near water.

•  The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

•  Clean only with a dry cloth.

•  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. To ensure reliable operation of the product and to protect it from overheating put the product in a position and location that will not interfere with its proper ventilation.

•  Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

•  No naked flame sources, such as lighted candles, should be placed on the apparatus.

•  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wider blade or third prong is provided for your safety. If the provided plug does not fit in your outlet, consult an electrician for
  replacement of the obsolete outlet.

•  Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

•  The mains plug or appliance coupler is used as disconnect device, the disconnect device shall remain readily operable.

• The main plugs or the appliance coupler shall be readily accessible to completely disconnect the apparatus from power.

•  Only use attachments/accessories specified by the manufacturer.

•  Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

•  Unplug this apparatus during lightning storms or when unused for long periods of time to prevent damage to this product.

•  The maximum operating temperature is 45°C.

•  Minimum 5cm distances around the apparatus for sufficient ventilation.

•  The device can be used in all European countries.

•  Only 2-pin EU and 3-pin UK will be used for the Singapore market.

•  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
  the way such as the power-supply cord or plug is damaged; liquid has been spilled or objects have fallen into the apparatus;

• The apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Do not attempt
  to service this product yourself. Opening or removing covers may expose you to dangerous voltages or other hazards.

• Please call KEF to be referred to an authorized service center near you.

FCC Supplier’s Declaration of Conformity
Unique Identifier: LSX II
Supplier Information: GP Electronics (HK) Ltd. 9/F, Building 12W, 12 Science Park West Avenue, Hong Kong Science Park, Pak Shek Kok, New Territories, Hong Kong +852 2424 3521
U.S. Distributor Information: GP Acoustics (US), Inc. 10 Timber Lane, Marlboro, New Jersey US-07746, United States City, State: NJ +1 732 683 23 56

References

• KEF US | KEF USA
• KEF US | KEF USA
• Wireless HiFi Speakers & Audio Systems | KEF Australia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>