JTS CX-508 Condenser Wind Instrument Microphone Instructions

JTS CX-508 Condenser Wind Instrument Microphone

Features:

• Flat response with a slight peak of high frequency for natural and bright sound delivery
• Excellent shock-mount design for superior isolation from movement and vibration
• Adjustable plastic gooseneck and axis for precise microphone positioning on the bell of an instrument
• Lowest profile and lightweight design for interference-free performance
• Clamp with elastic finish for secure holding and to prevent marks on the instrument
• Newly added spider suspension for effective isolation of unwanted mechanical vibrations

Specifications:

• Model: CX-508
• Type: Condenser
• Frequency Response: 50~18,000 Hz
• Polar Pattern: Cardioid
• Sensitivity (at 1,000Hz): -64dB(0.63mV)0dB=1V/bar
• Impedance: 220 ohms
• Max. SPL for 1% T.H.D.: 130 dB
• Output Connector: 3P XLR(M)
• Phantom Power Requirements: 9-52 VDC

Product Usage Instructions:

1. Attach the clamp to the desired location on the bell of the instrument.
2. Adjust the gooseneck and rotary axis to the proper angle for sound pickup.
3. Slip the windscreen on the microphone head to prevent wind noise.

Windscreen Instruction:

1. Place the adhesive tape as shown in Picture 1 & Picture 2.
2. Tear off the adhesive tape and position the windscreen as shown in Picture 3.

Frequently Asked Questions

• Q: How to prevent interference while using the microphone?
  • A: Ensure the clamp is securely attached, and adjust the gooseneck for proper positioning.
• Q: What is the frequency response range of the microphone?
  • A: The frequency response range is 50~18,000 Hz.

Features

• Flat response with slide peak of high frequency ensures natural and bright sound delivery.
• Excellent shock-mount design permits superior isolation from movement and vibration.
• Good plastic gooseneck together with an adjustable axis allow locating the microphone in precise position on the bell of a horn.
• The lowest profile and lightweight design allow Interference-free for the performer.
• Clamp with elastic finish ensures tight holding and prevent leaving vestiges in the instrument.
• Newly added spider suspension isolates unwanted mechanical vibration effectively

Use Instruction

1. Attach the clamp to the desired location on the bell of the instrument. (Figure 1)
2. Adjust the gooseneck and rotary axis to a proper angle for sound pickup. (Figure 2)
3. Slip windscreen on the microphone head to prevent wind noise. (Figure 3)

Windscreen Instruction

1. Place the adhesive tape as show in Picture 1 & Picture 2
2. Tear up the adhesive tape and position the windscreen as shown in Picture 3.

Specifications

Accessories

• Windscreen

Dimension

Frequency Response

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>