JTS GML Series Gooseneck Microphone Instruction Manual

June 24, 2024
JTS

JTS GML Series Gooseneck Microphone

JTS-GML-Series-Gooseneck-Microphone-PRODCUT

Specifications

  • Type: Electret Condenser
  • Frequency Response: 80 to 18,000Hz
  • Polar Patterns: Cardioid, Supercardioid, Omnidirectional
  • Output Level (at 1,000Hz): Open circuit voltage (operation voltage 48V) or battery power 3V (1.5V * 2)
  • Gooseneck Length: GML-5206 – 6″ (152mm), GML-5212 – 12″ (305mm), GML-5218 – 18″ (457mm)

Product Information

The GML Series Gooseneck Microphone is a wide-range condenser microphone available in three polar patterns: cardioid, supercardioid, and omnidirectional, catering to various sound pick-up applications.
The microphone comes with interchangeable capsules for easy replacement and repair. It features a 3P XLR connector insert for direct connection to a mating panel jack or cable connector.
Additional features include a -10dB Pad and Low-Cut switches for convenient installation and a Mic-On LED indicator to show the working status. The small diameter gooseneck allows for high flexibility in positioning, and multiple gooseneck lengths are available to meet different requirements.

Features

  • The GML series are wide-range condenser microphones with three kinds of polar patterns, cardioid, supercardioid, and omnidirectional, that meet various applications and demands in sound pick-up situations.
  • Bundled with interchangeable microphone heads provides great convenience in replacing and repairing.
  • GML series features a 3P XLR connector insert, allowing it to be plugged directly into a mating panel jack or cable connector.
  • -10dB Pad and Low-Cut switches are provided for easy installation.
  • Mic-On LED indicated the working status.
  • The small diameter gooseneck permits high flexibility in proper position and multiple gooseneck lengths can match different requirements.

GML-5206/5212/5218

  1. Equipped with a built-in power module, an external battery power or phantom power source is required to power the unit.
  2. Plug the connector inserts directly into a 3P panel jack on the floor stand or conference table. (Figure 1)
  3. Adjust the gooseneck to aim the microphone toward the proper sound source. (Figure 2)
  4. Slip on the windscreen over the microphone head to control breath and popping noise. (Figure 3)JTS-GML-Series-Gooseneck-Microphone-FIG-3

Specification

  • Type Back: Electret Condenser
  • Frequency Response: 80 to 18,000Hz
  • Polar Pattern: Cardioid, Supercardioid Omnidirectional
  • Output Level(at 1,000Hz): Open circuit voltage: -56+3 dB (1.58mV)0dB=1V / u bar
  • Impedance: Rated impedance is 22092
  • MAX. SPL for 1% THD: 125dB
  • Output Connector: XLR(M) type (power module)
  • Power Supply: 9-52 VDC Phantom power(LED standard operation voltage 48V) or battery power 3V(1.5V * 2)
  • Gooseneck Length: GML-5206 6″(152mm)
    • GML- 5212 12″(305mm)
    • GML- 5218 18″(457mm)

Accessories

  • Windscreen
  • Interchangeable capsules ( Supercardioid, Omnidirectional )

FAQ

  • Q: Can I use the GML Series Gooseneck Microphone with a battery-powered device?
    • A: Yes, you can power the microphone using a 3V battery source (1.5V * 2).
  • Q: How do I change the polar pattern of the microphone?
    • A: The microphone comes with interchangeable capsules for changing between cardioid, supercardioid, and omnidirectional polar patterns.

https://muzcentre.ru

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals