Hohem HRT-03 iSteady Gimbals Instructions
- June 27, 2024
- hohem
Table of Contents
Hohem HRT-03 iSteady Gimbals
Pairing the remote control with the gimbal
Please press the function button of the gimbal 7 times once the gimbal is turned on, the bluetooth light will flash alternately in yellow and green and enter the pairing mode.
Make sure the gimbal is on the pairing mode before turning on the remote control to connect.
During the pairing process
a. The pairing can be completed in 3 seconds, after the gimbal bluetooth
light stop flashing alternately in yellow and green;
b. If the remote control is not paired within 30 seconds, the pairing
will be cancelled;
c. Click the function button to cancel pairing;
d. Double-click the function button to clear the paired remote control
and cancel pairing;
(And the paired remote control will be unavailable and need to be repaired)
Power Button
ON : Power on
OFF : Power Off
Shutter Button
(Make sure the app connect to the gimbal successful) Single Press: Take photo, Start/End video Double Press: Switch the photo and video modes Triple Press: Switch the front and rear cameras (Only available in the app)
Function Button
Single Press : Switch the landscape and portrait modes
Double Press : Reenter the gimbal
Triple Press : Inception (Auto rotation)
M Button (Gimbal Working Mode)
Single Press : Pan& Tilt Follow
Double Press : Pan Follow
Triple Press : All Lock
Quartic Press : POV (All Follow) Long Press: Switch the zoom in/out mode
and gimbal tilt control mode (Zoom in/out mode only available in the app)
Navigation Buttons:
Up/Down/Left/Right
Up/Down :Tilt Control (Indicator light shows green)
Control the image zoom in/out (Indicator light shows blue and only available
in the app)
Left/Right : Pan Control
Indicator Light
The indicator light shows green or blue in button operation. If no light
shows, it means the remote control is not turned on or no battery.
Green light : Gimbal controlling
Blue light: Phone camera controlling