hohem iSteady Pro4 Splashproof 3-Axis Action Camera Gimbal User Manual
- June 5, 2024
- hohem
Table of Contents
- Product Overview
- Accessories List
- Download APP—Hohem Gimbal For More Interesting Functions
- Gimbal Charging
- Mounting the Action Camera
- Operation Instruction
- Gimbal Mode Button
- Camera Connection/Remote Control Indicator
- App “Hohem Gimbal” Instruction
- Calibration
- Firmware Upgrade
- FAQ
- Specifications
- Warranty Card
- CALL CENTER -Toll-Free
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
iSteady Pro4 Splashproof 3-Axis Action Camera Gimbal
User Manual
For more tutorial videos please scan the YouTube QR code
DISCLAIMER
Thank you for purchasing the Hohem product. By using this product, you hereby
signify that you have read this disclaimer and warning carefully and that you
understand and agree to abide by the terms and conditions herein. You agree
that you are solely responsible for your own conduct while using this product,
and for any consequences thereof. You agree to use this product only for
purposes that are proper and in accordance with all applicable laws, rules,
and regulations, and all terms, precautions, practices, policies, and
guidelines Hohem has made and may make available. Hohem accepts no liability
for damage, injury, or any legal responsibility incurred directly or
indirectly from the use of this product. The user shall observe safe and
lawful practices including, but not limited to, those set forth in this
document.
Email: service@hohem.com
Website:www.hohem.com
Manufacturer: Hohem Technology Co., Ltd
Connect us on at Facebook @HohemTechOfficial
Product Overview
❶ Mini USB DC Out | ❿ Mode Indicator |
---|---|
❷ 1/4 Inch Extension Screw Hole | ⓫ Joystick |
❸ Trigger | ⓬ Slider |
❹ USB DC Out/ DC In | ⓭ Tilt Motor |
❺ Handle (Battery inside) | ⓮ Pan Motor |
❻ Quick Release Clip | ⓯ Bluetooth Indicator |
❼ Camera Connection/Remote Control Indicator | ⓰ Power Indicator |
❽ PAIR Button (Camera Connection) | ⓱ Mode Button |
❾ Roll Motor | ⓲ Power ON/OFF (Shutter/Record button) |
Accessories List
Mini Tripod1
Carry Case1
Camera Charging Cable3 (Type C & Micro USB & Mini USB)
Gimbal Charging Cable1 (Type C)
User Manual (Include Warranty Card)1
Quick Start Guide1
Download APP—Hohem Gimbal For More Interesting Functions
http://www.gimbalengine.com:8080/index.php/hohem-gimbal-us/
- Scan QR code to download the app.
- Hohem Gimbal supports iOS 9.0 and Android 5.0 or later.
- Search for’Hohem Gimbal’ in the App Store or Google Play and follow the instructions to install the app.
Gimbal Charging
****Charge the gimbal fully before using it for the first time.
The battery takes approximately 3.5 hours to fully charge.
-
USB Port: Power bank output
-
Type C Port: Gimbal charging port
-
Mini USB DC Out: Action camera charging port (Supported to charge the camera while working)
-
Tap the power button to check the battery status
Flickering: Charging
4 LED lights on 100%, fully charged
3 LED lights on 75%
2 LED lights on 50%
1 LED light on 25% -
Low battery warning: Mode indicator flashing back and forth
Mounting the Action Camera
****Do not turn on the gimbal without an action camera mounted.
Pull the quick release clip (spring) and snap it into the groove to secure the camera.
If the power button or the charging port is blocked, please adjust the direction of the motor axis after installing the camera as shown above.
-
Max Payload: 150g
-
Compatible Cameras:
GoPro Hero 10/9/8/7/6/5/4/3, DJI OSMO Action,
Insta360 ONE R (4K & 1-Inch), SONY RX0, and other action cameras with similar size and weight. -
Max Camera Size: Height: 51mm; Depth: 30mm
-
Cameras can be controlled with a handle: GoPro 10/9/8/7/6/5 (not support GoPro 7 white & silver version)
Operation Instruction
-
Joystick
Push Up/Down
Tilt Control
Push Left/Right
Pan Control -
Mode Indicator
PF: Pan Follow
PDF: Pan & Tilt Follow
L: AII Locked
POV: All Follow & Inception -
Slider
Push up: the roll axis rotates counterclockwise
Push down: the roll axis rotates clockwise
Controllable range: -30° ~+30°
Roll axis adjustment is not supported in All Locked Mode -
Bluetooth Indicator
Light On: Gimbal is connected with phone Bluetooth
Flash Twice: Power On/Off
Light Off: Gimbal is disconnected with phone Bluetooth -
More Button
Single Tap: Switch mode -
Power On/ Off (Long press for 3 seconds)
Single Tap: Take a photo, Start/End video Double Tap: Switch between the Photo Mode and the Video Mode (Make sure The GoPro camera is connected with the gimbal) -
Trigger:
Press On: Sport mode
Double Tap: Re-center
- It is not available in the mode L(AII Lock)
Gimbal Mode Button
Tap the button to switch different working modes with light on.
PF (Pan Follow)
Default mode, tilt & roll axis are both locked, and the camera is able to move
to the left or right smoothly.
PTF (Pan & Tilt Follow)
Roll axis locked, the camera is able to move to left/right, and tilt up/down.
L (All Locked)
The camera stays in its current orientation.
POV (AlI Follow & Inception)
All Follow – Tilt axis, roll axis and pan axis all follow the movement of the
gimbal. Inception – Hold the gimbal horizontally and push the joystick to the
left or right. ****
Long Press for 6 Seconds
Off-line Calibration (Bluetooth indicator stays on)
It requires calibrating the gimbal only when you notice any kind of not level
or drift on any of the axes.
Camera Connection/Remote Control Indicator
*iSteady Pro 4 exclusive remote control is a nonstandard purchase.
For remote control pairing and instructions please see the user manual for the
remote control.
Light Off | No, any connection |
---|
Keep Flashing
Green Light| Double-click the PAIR button to enter the camera pairing mode
Stay On
Green Light| Gimbal is connected to the camera
Fast Flash
Green Light
3 Times| Press and hold the PAIR button for 3 seconds to unpair the camera
Yellow Light| Remote control operation (*need additional purchase)
App “Hohem Gimbal” Instruction
Bluetooth Connection
- Enable the Bluetooth on the smartphone.
- Launch the app, choose the product model and connect to the gimbal. (Please only enable the phone Bluetooth and connect Bluetooth in the app)
Main App Features
❶ Home | ❻ Re-center |
---|---|
❷ Bluetooth | ❼ Remote Control |
❸ Power Status | ❽ Shutter (Ensure camera connection) |
❹ Axis angle display in sync | ❾ Switch Between Photo/Video Mode (Ensure camera |
connection)
❺ Motion Timelapse| ❿ Switch Work Mode
Other App Features
-
Gimbal Specs Setting:
A. Following Speed (To adjust the following speed of pan/tilt/roll axis)
B. Joystick Speed (To adjust the rotating speed by controlling the joystick)
C. Dead Zone (No following movement when the rotation angle is less than the dead area setting)
D. Trim (Adjust the tilt/roll axis in a small angle)
E. Joystick Reverse (Reverse the rotation direction by controlling the joystick)
F. Motor Options ( To adjust the motor torsion of pan/tilt/roll axes, which is useful to solve the vibrate issue due to lightweight or overweight action camera)
G. Camera options: enable/disable charging output of gimbal mini USB port, CAMERA CONTROL OPTIONS. -
Firmware Upgrade:
The firmware is subject to upgrade without a fixed schedule.
Firmware upgrade helps to optimize the working of the gimbal, please refer to ‘Firmware Upgrade’ for more details -
Calibration:
It requires calibrating the gimbal only when you notice any kind of not level or drift on any of the axes, Please refer to ‘Calibration’ for more details
Calibration
Calibration
It requires calibrating the gimbal if you notice it is not working properly as
below.
- The pitch angle is not level with the horizontal surface.
- The roll angle is not parallel to the horizontal surface.
- The pan axis drifts when the gimbal is on all locking mode.
Calibration Instruction
Method 1: Off-line Calibration
- Power on the gimbal, long press the mode button for over 6 seconds till the Bluetooth indicator stays on.
- Laying the gimbal on a static flat surface without any vibrating. Calibration is completed once the Bluetooth Indicator flashes twice.
* If the off-line calibration is not worked, please refer to [Method 2]
Method 2: 6-Side Calibration Via App
Please make sure the gimbal is connected with the app via Bluetooth
successfully, then enter “Calibration” and follow the instruction in the app
to calibrate the gimbal.
Firmware Upgrade
Please make sure the gimbal is connected with the Hohem Gimbal app via Bluetooth successfully, and upgrade to the latest firmware in the app.
FAQ
Q: Why does the gimbal vibrate after powering on?
A:
- Make sure to mount the camera before powering on the gimbal.
- For some lightweight action cameras, you need to reduce the gimbal motor power through the app (Hohem Gimbal – Setting – Motors options)
Q: Why the phone app cannot be connected to the gimbal via Bluetooth?
- Enable phone Bluetooth (Enable ONLY)
- Turn on the gimbal
- Launch Hohem Gimbal app
- Select “iSteady Pro 4 “
- Click “CONNECT DEVICE ” (Important! The Bluetooth has to connect in the app!)
*If the connection fails, please exit the app, restart the Bluetooth, follow the above steps, and try again.
Q: How to do if the gimbal is not level or drifting after powering on?
A: Please refer to ‘Calibration’ for more details
Specifications
Weight | 365g includes battery |
---|---|
Main Material | High-performance composite |
Payload | 150g |
Compatible
Cameras| GoPro Hero 10/9/8/7/6/5/4/3, DJI OSMO Action, Insta360 ONE R (4K &
1-Inch), SONY RX0 and other action cameras with similar size and weight.
Max Camera Size:
Height: 51mm; Depth: 30mm
Cameras can be
controlled with
handle| GoPro 10/9/8/7/6/5 (not support GoPro 7 white & silver version)
Battery Capacity| 3600mAh
Working Time| 14 hours
Charging Time| 3.5 hours
Mechanical Range| Panning: 600°
Rolling: 320°
Tilting: 320°
Working
Temperature| 10 B64 45° C
Splash Proof| IPX4 rating water splash proof is resistant to water splashes
from any direction.
Standard
Accessories| Mini Tripod1 Carry Case1
Camera Charging Cable3 (Type C & Micro USB & Mini USB)
Gimbal Charging Cable1 (Type C)
User Manual (Include Warranty Card)1
Quick Start Guide1
Warranty Card
Disclaimer and Warning
- Within 15 days of the purchase date. Any functional disorder or quality problem enjoys free replacement service. But ensure the commodity and package with no damage, and we will offer a brand new replacement after confirming the product problem.
- Warranty valid only under normal use.
- Used in the normal circumstances, 1-year warranty, maintenance of life (not include the All accidents or artificial damage, improper disassembly or misuse damage is NOT covered by the warranty).
- Please keep and offer the warranty card for claiming the warranty service.
Information
User Name:——————————-
Contact No.:——————————-
Address:——————————-
Purchase Date:——————————-
Prod. Serial No.:——————————-
Failure Cause:——————————-
Service Record:——————————-
CALL CENTER -Toll-Free
UNITED STATES: +1(888)9658512 Mon-Fri: 9:00AM-5:00PM(EST)
UNITED KINGDOM: +44(0)808 2737578 Mon-Fri: 2:00PM-10:00PM(GMT +0)
CANADA: +1(855)758-8939 Mon-Fri: 9:00AM-5:00PM(EST)
BRAZIL: +55 (0)800 5911897 Mon-Fri: 10:00AM-6:00PM(GMT -3)
References
- product.by Выставлен на продажу
- Hohem - Official Website - Gimbal, Gimbal Stabilizer, Phone Gimbal, Gimbal for iphone, 3 axis gimbal, Hohem, iSteady V2, AI Sensor, AI Gimbal, Tracking
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>