hohem PHM-017 iSteady Q Smartphone Stabilizer User Manual
- June 6, 2024
- hohem
Table of Contents
- hohem PHM-017 iSteady Q Smartphone Stabilizer
- iSteady Q Overview
- Handheld Use
- Desktop Use
- Phone Mounting
- Powering On
- Switching Modes
- Switching Working Modes
- Downloading the Hohem Joy app
- Connecting iSteady Q with the Phone
- Taking Photos and Videos
- Navigation Button
- More Functions of the Power Button
- Indicator Lights
- Specifications
- Warranty Conditions
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hohem PHM-017 iSteady Q Smartphone Stabilizer
iSteady Q Overview
Handheld Use
When to lock the phone clamp?
iSteady Q’s phone clamp can make 360° infinite rotation. It is able to lock
the phone clamp to use as a selfie stick when it is in low power mode.
Confirm the position of the notch on the back of the phone clamp. Lock the motor, and the bolt will be inserted into the notch. The motor will be fixed and won’t rotate.
Desktop Use
To use 360° tracking, please set up iSteady Q in desktop use, launch the Hohem Joy app, turn on iSteady Q’s power button, and ensure the Bluetooth is connected. Hohem Joy app supports face tracking, gesture control, motion timelapse, and moment mode.
Phone Mounting
Unfold the phone clamp and turn the “Hohem” logo towards the left. Meanwhile, turn the phone camera towards the left, stuck the phone in the bottom of the phone clamp, and pull the head of the phone clamp to mount your phone.
- The stabilizing stick would work improperly if there is no mobile phone mounted.
- Make sure your phone clings to the rubber mat and clamps in the middle, otherwise the stabilizing stick would vibrate or turn off automatically.
Powering On
Long press the power button for three seconds.
The remote control will connect to the stabilizing stick automatically after
turning on.
If the remote control is not working properly, please follow the steps to pair
the device again:
- Turn on the stabilizing stick first. Press the power button 7 times to enter the pairing mode, and the working mode indicator light flashes alternately in yellow and green.
- Then turn on the remote control. Pairing is complete in about one second, and the working mode indicator light stays green.
Switching Modes
Single-click: Switch the landscape and portrait modes.
Double click: Recentre the stabilizing stick.
Press five times: Auto calibration.
- Please, do calibration on a flat surface when the stabilizing stick is not level or drifting. There will be a beep sound after enabling the calibration and do not move the stabilizing stick until the calibration is done and you hear another beep sound.
Long press for five seconds: Power off the stabilizing stick.
Triple-click: Autorotation (300° auto inception/360° horizontal
rotation).
Switching Working Modes
You can switch between working modes by pressing the “M” button.
Single press: Lock mode (default)
- When the handle rotates along the motor shaft, the phone does not follow the motor to rotate, and the working mode indicator light stays green.
Double press: POV follow mode
- When the handle rotates along the motor shaft, the phone
does follow the motor to rotate slowly, and the working mode indicator light flashes green.
Long press: Low power mode (longer battery life)
- The motor will stop working, and it can be used as a regular selfie stick by locking the motor.
Downloading the Hohem Joy app
The Hohem Joy app supports face tracking, gesture control, motion timelapse and moment mode. Scan the QR code to enter the download page, or search for “Hohem Joy” in the App Store or Google Play. Hohem Joy app requires iOS 10.0 or above, or Android 6.0 and above.
Connecting iSteady Q with the Phone
Taking Photos and Videos
First, ensure that the Bluetooth is successfully connected in order to use this feature, since it is only available in the app.
Single press: Take the photo/video.
Double press: Switch between the photo and video modes.
Triple press: Switch between the front and rear cameras.
Navigation Button
More Functions of the Power Button
Single press: Switch between lock/POV follow mode.
Double press: Recentre the stabilizing stick.
Triple press: Autorotation (300° auto inception/360° horizontal
rotation). Press five times: Auto calibration.
- Please, do calibration on a flat surface when the stabilizing stick is not level or drifting. There will be a beep sound after enabling the calibration, and do not move the stabilizing stick until the calibration is done and you hear another beep sound.
Press seven times: Remote control pairing.
Press nine times: Cancel the phone Bluetooth pairing.
Indicator Lights
Specifications
- Model iSteady Q
- Weight 195 g
- Folded Dimensions 140 × 54 × 36 mm
- Material PA&PC + ABS
- Battery 460 mAh
- Operating Time 3 hours
- Mechanical Range Pan: 360° / Roll: 360°
- Controllable Range Pan: 360° / Roll: 360°
- Compatible Phones Weight: ≤ 280 g
- Thickness: ≤ 11 mm
- Width: 55.5 mm ~ 100 m
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2
years. If you need repair or other services during the warranty period,
contact the product seller directly, you must provide the original proof of
purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions,
for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.
EU Declaration of Conformity
Identification data of the manufacturer’s / importer’s authorized
representative: Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
IČO: 27082440
Subject of the declaration:
Title: Stabilisation stick
Model / Type: Hohem iSteady Q
The above product has been tested in accordance with the standard(s) used
to demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive No. (EU) 2014/53/EU
Directive No. (EU) 2011/65/EU as amended 2015/863/EU
Prague, 23.8.2021
WEE
This product must not be disposed of as normal household waste in
accordance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase
or handed over to a public collection point for the recyclable waste. By
ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product.
Contact your local authority or the nearest collection point for further
details. Improper disposal of this type of waste may result in fines in
accordance with national regulations.
References
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza | Alza.co.uk
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz
- alza.de
- alza.hu
- alza.sk