OdinLake B625-1 Ergonomic Chair User Manual

ODINLAKE ERGO CORE
MODEL:（B625-1）
USER GUIDE
OdinLake
Ergonomic Chair
Health & Stylish
www.odinlake.com

Note : Thanks for purchasing from OdinLake. This manual contains important information so please keep it for further possible uses. If you have any questions that can not be solved by this manual, contact us: customers@odinlake.com

Tips

1. Please make sure that all bolts and screws have been tightened properly before actually using the chair. Check all levers, adjust knobs and buttons before everyday use.
   P.S: If the cylinder doesn’t match the seat plate appropriately, the height adjuster may stop functioning.

2. Please inspect the chair twice a year. Daily use can wear down the screws and bolts, so regular inspections are important in order to keep you safe.

3. No standing on the chair.

4. Please do not press the height adjuster down while adjusting, you only have to lift it slightly to raise or lower the seat. Hard pushing  might break the adjuster.

5. If you are giving this chair to a third person/party, please attach this manual with the chair.

6. Installation tips: follow the instructions carefully. Please do not tighten the screws until all screws are lined up at once. This helps you make changes easier if some steps go wrong. Over-tightening one screw can make other screws hard to tighten.

7. Please tighten all screws again after the set-up process is complete.

Tools List

Parts List

Tools List

Parts List

Assembly Instructions

Step 1
Take the Casters(A) and push them into the 5-star Base(B).
Install the Cylinder(C) into the Base(B). Step 2
Fix the Armrests(F) to the Seat(E) with 6pcs Lock Washers(J) & BoIts(H). Step 3
Fix the Seat PIate(G) to the Seat(E) with 4pcs Lock Washers(J) & BoIts(I). Step 4
Fix the Backrest(D) to the Seat PIate(G) with 4pcs Lock Washers(L) & BoIts(K). Step 5
Place the upper part onto the cylinder
Step 6
Completed!

Scan the code to watch the installation video.

https://www.odinlake.com/pages/assembly- video

Functions

ERGONOMIC DESIGN
Curved design offers adequate mid-back and adjustable lumbar support, which can effectively reduce the pain and pressure of the neck and back caused by long time sitting.
STYLISH ARMRESTS
The stylish PP+PU material 3D armrests can be multi-functionally adjusted, the armrest can be adjusted up and down, and the armrest pad can be adjusted forward and backward + rotated left and right, making the chair more modern and less monotonous.
ADJUSTABLE HEIGHT
Pull up the adjustment lever then you can raise or lower the seat.
ROCKING FUNCTION
Switch the tilt lock lever to start rocking or lock at certain position. The tension knob (under the seat) can adjust the tilt tension of the backrest.

Frequent Questions Answers

1. How much weight can this chair hold?

The maximum weight capacity is 300 lbs. In general, you will feel very comfortable if you weigh about 260 lbs. But if you feel any discomfort, please contact us for technical assistance at customers@odinlake. com.

2. What if my lumbar cannot fit on the backrest closely?

The fitness of the lumbar and backrest varies with different users' heights.Tucking a cushion between the user's lower back and the chair can improve fitness if it isn't snug.

3. How to clean the mesh office chairs?

Use a vacuum cleaner weekly to keep the mesh breathing easily. Odinlake ergonomic chairs can be washed with warm water and mild detergent. Use asoft brush and be careful when scrubbing or the mesh fiber may break. Apply cleaning solutions and cover the dirty area with a wet cloth for 30 minutes to remove the stubborn dirt.

4. How to clean the office chair wheels?

Pull off the wheels by hand or detach with a screwdriver when cleaning. Remove dirt and debris with a spray cleaner. And be sure to dry all components thoroughly. After finishing cleaning, wheels need to be polished by greaseless lubricant to keep them operating smoothly.

Frequent Assembling Malfunction

| Malfunction| Reason| How to Fix
---|---|---|---
1| Abnormal noise| Loose or untightened bolt| Retighten all bolts
2| Crooked backrest or armrest| Crooked components during assembling| Loosen the bolts, adjust component to correct position and retighten
3| Seat can not be raised| The lift valve is closed or person sitting on the chair| Open the lift valve, do not sit on the seat while adjusting
4| Seat can not be lowered| The lift valve is closed, person not sitting on the chair or not sitting properly| Open the lift valve, make sure to sit in the center of the chair
5| Not rocking| Rocking function is locked| Pull out the adjustment lever
6| Uncomfortable rocking – strong tension| user’s back is not close Rocking spring too tight,
to the backrest| Adjust spring to the left until you find the best tension that fits your back to backrest closely
| Uncomfortable rocking-weak tension| Rocking spring too loose| Adjust spring to the right until you find the
best tension

Warranty Rules

1. Warranty Range
   We provide free replacement parts for buyers/users. Warranty only covers the parts of the chair. Please note that free tools ( allen wrench ) are not covered in the warranty.

2. Warranty conditions
   Parts will be covered if used normally in reference to the instructions in the manual. Warranty will not include damages caused by not following the manual.

3. No warranty covered

1. No proof of damaged parts (need clear original picture or video to show the defective parts of chair).
2. Failure parts caused by improper operation after purchase. For example, sitting on the armrest may break it.
3. The parts fail due to modification, disassembly or repair of the product by a third party or customer not following the instructions.
4. Other reasons found that cannot prove damaged parts. We shall not be responsible for any intended damages or accidental damages by detrimental weather, etc.

4. Attention
   Please keep the original package box for 14 days in case you need to return the chair to the seller.

Office Ergonomic Guide

A comfortable working space can help you feel better.Give your sitting and working area a makeover with this visual guideline to office ergonomics.Enjoy your daily life with Odinlake Chairs!
Wrists straight, hands at or below elbows level
Adjust chair height so knees are about same level with hips

Disclaimer

| Attention: Ignoring the contents described herein may result in death or injury to the user, or there is a risk of property damage.
---|---
| Please do not use or store the product in high temperature, high humidity or direct sunlight for a long time.
| Please do not repair, modify or disassemble yourself unless you follow the instructions in this manual.
It could cause a malfunction.
| Do not use this product for infants.
| Never sit on the armrest

OdinLake owns the copyright of this file.
Unauthorized reproduction/reprinting of all parts of this manual is prohibited.
Due to product improvement, the specifications and appearance of this product are subject to change without prior notice.
Please note that we are not responsible for any failure of other products caused by using this product.
OdinLake is a registered trademark in the USA, Europe and Japan.

Any Quality Issue
Please send email to customers@odinlake.com,
take picture and offer your Order No. for OdinLake’s easy checking.
OdinLake will provide free replacement parts, send a new chair or refund accordingly.

References

• Professional Ergonomic Office Furniture - OdinLake Ergo Manufacture

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>