hohem iSteady Pro E 3-Axis Stabilizing Gimbal for Action Camera User Guide
- June 5, 2024
- hohem
Table of Contents
- hohem iSteady Pro E 3-Axis Stabilizing Gimbal for Action Camera
- Product Overview
- Download APP-Hohem Gimbal
- Quick Start
- Gimbal Charging
- Mounting the Actioncam
- How to connect GoPro?
- Operation Instruction
- App “Hohem Gimbal” Instruction
- App “Hohem Gimbal” Instruction
- Calibration
- Firmware Upgrade
- Parameters
- FCC statements
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hohem iSteady Pro E 3-Axis Stabilizing Gimbal for Action Camera
DISCLAIMER
- Please use the product in accordance with the user guide.
- Make sure your camera device is mounted before powering on the gimbal.
- Keep the gimbal away from fire and heat sources.
- Prohibiting the product to be used for any ilgal purpose. The user who violates the regulation will be responsible for all the consequences by purchasing and using the product
- For any products which come from the non-normal source, we will not be at any service.
- For any questions, please contact the technical support of Hohem Tech. We will be always at your service to provide the technical support and advice for any improper using of gimbal.
- Hohem Tech reserves the right of final explanation.
Tel: +86-755-86573216
Email: service@hohem.com
Web: www.hohem.com
Address: B106, University Creative Park, Xiii, Nanshan, Shenzhen, 518055, P.R.
China
Product Overview
- Mini USB DC out Port
- 1/4 Inch Extension Screw Hole
- Trigger Button
- USB DC Out/ DC In
- Handle (Battery inside)
- Thumb Screw
- WiFi Indicator
- WiFi Control ON/OFF
- Roll Motor
- Mode Light
- Joystick
- Slider
- Tilt Motor
- Pan Motor
- Bluetooth Light
- Power Indicator Light
- Mode Button
- ON/OFF
Accessories List
- Mini Tripod*1
- USB C able*1
- Carry Case*1
- User Manual*1
- Charging Cable*1
Download APP-Hohem Gimbal
- Scan QR code to download the app.
- Hohem Gimbal supports iOS 9.0 and Android 5.0 or above.
- Search for’Hohem Gimbal’ in the App Store or Google Play and follow the instructions to install the app.
Quick Start
A. Charge the battery B. Mounting actioncam C. Power on Long press the power button for 3 secs to turn on the gimbal.
Gimbal Charging
Charge the gimbal fully before using it for the first time.
- USB Port: Power bank output
- Micro USB Port: Gimbal charging port
- Mini USB DC out Port:Actioncam charging port
(It can be enabled in the App Setting
- Camera options
- Charging Function)
* Tap the power button to check the battery status
-
4 LED lights on: 100% 3
-
LED lights on: 75% 2
-
LED lights on: 50% 1
-
LED light on: 25%
-
Indicator Lights blink: Charging in process
-
4 LED light on: Fully charged
Low battery warning: Mode light blinks back and forth
Mounting the Actioncam
* Do not turn on the gimbal without a actioncam mounted on.
Put the tilt motor to the LEFT side, place action camera closely to the back
clip as picture and tighten the knob to secure its position. Double tighten by
2 long screws against violent movement.
- Max Payload: 150g
- The camera holder supports the max. width of actioncam 45 mm, max. thickness 32mm.
- Supported cameras: Go Pro Hero 8/ 7 /6/5/4/3, DJI OSMO Action, SONY RXO, YI, SJCAM,and other action camera with similar size and weight.
How to connect GoPro?
iSteady Pro 3 is able to connect GoPro Hero 8/7 /6/5/4.
-
Power on the gimbal.
-
Turn on the WiFi Control, the WiFi indicator flashes to wait the gimbal to connect GoPro.
-
Turn on GoPro and enter the CONNECT, click
“Smart Remote” for connection. -
The WiFi indicator will be solid green once connected successfully.
-
Turn off the WiFi control when you do not want to connect GoPro, to save the battery of gimbal.
-
GoP ro will be automatically connected after turn i
on the WiF control again.
Operation Instruction
App “Hohem Gimbal” Instruction
Bluetooth Connection
A. Enable the Bluetooth on the smartphone.
B. Open the app, choose the product model and confirm into Bluetooth
connection.
C. Make sure the gimbal indicator keeps on.
Main App Functions
- Home
- Bluetooth
- Power Status
- Axis angle display in sync
- Motion Timelapse
- Re-center
- Remote Control
- Switch Work Mode
App “Hohem Gimbal” Instruction
Other App Functions
-
Gimbal Specs Setting:
-
Following Speed (To adjust the following speed of pan/tilt/roll axis)
-
Joystick Speed (To adjust the rotating speed by controlling the joystick)
-
Following Dead Area (No following movement when the rotate angle is less than dead area setting)
-
Trim (Adjust the tilt/roll axis in small-angle)
-
Joystick Reverse (Reverse the rotation direction by control the joystick)
-
Motor Options ( To adjust the motor tori son of pan/tilt/roll axes, which is useful to solve the vibrate issue due to lightweight or an overweight action cam)
-
Camera options: enable/disable charging output of gimbal mini USB port, CAMERA CONTROL OPTIONS.
-
Firmware Upgrade: The firmware is subject to upgrade without a fixed schedule. The firmware upgrade helps to optimize the working of the gimbal, please refer to page 13 for details.
-
Calibration: It requires calibrating the gimbal only when you notice any kind of not level or drift
on any of the axes, please refer to page 12 for details. -
Operation Tutorial: For any questions, please refer to the user guide for details, the content is subject to change without prior notice.
Calibration
It requires calibrating the gimbal if you notice it is not working properly as below.
- The pitch angle is not level with the horizontal surface.
- The roll angle is not parallel to the horizontal surface.
- The pan axis drifts when the gimbal is on all locking mode.
Calibration Instruction Method 1: Off-line Calibration
- Power on the gimbal, long-press the mode button over 6 seconds till the mode light on.
- Laying the gimbal on a static flat surface without any vibrate. Calibration is completed once the mode light flash twice.
*If the off-line calibrationis not useful, please refer to [ Method 2]
Method 2: 6-Side Calibration Via App
Please make sure the gimbal is connected with app via bluetooth successfully,
then enter “Calibration” and follow the instruction in the app to calibrate
the gimbal.
Firmware Upgrade
Please make sure the gimbal is connected with app via bluetooth successfully, then enter the “Firmware Upgrade” and follow the instruction to upgrade the latest firmware.
FAQ
Q: Why the gimbal vibrates after powering on?
A: Make sure your actioncam is mounted firmly and well balanced before
powering on the gimbal, do not turn on the gimbal without a balanced load, as
doing so many damage the motors, please refer to page 6 for more details. For
some lightweight actioncam, it needs to adjust the motor torsion, please refer
to page 10 for details.
Q: How to connect the gimbal via app?
A:Please be noted that the bluetooth and gimbal must be connected directly in
the app “Hohem Gimbal”, rather than connecting in the smartphone bluetooth
list. Make sure all the permission is allow and enable the GPS of your
smartphonewhen you open the app for the first time.
Please refer to the tutorial video on our You Tube channel for more details.
Q: How to do if the gimbal is not level or drift after powering on?
A: Please refer to page 12 for details.
Parameters
Weight | 351g include battery |
---|---|
Main Material | High performance composite |
Payload | 150g |
Camera Size Supported | Max. Width: 45 mm Max. Thickness: 32 mm |
Supported Actioncam | GoPro Hero 8/7 /6/5/4/3, DJI OSMO Action, SONY RX0, YI, |
SJC AM, and other action camera with similar size and weight.
Splash Proof| IPX4 rating water splash proof, is resistant to water splashes
from any direction.
Battery Capacity| 3600 mAh
Working Time| 12 hours
Charging Time| 3.5 hours
Mechanical Range
| Panning. 600°
Rolling. 320°
Tilting 320°
Working Temperature| -10~45 °C
Motors Protection| Gimbal is able to power off automatically due to improper
operation of
the motors.
Standard Accessories| T r ipod, Carry case, USB cab l e (for charging gimbal),
Charg i ng Cable(for cha r g i ng ac t ionca m )
FCC statements
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to this
equipment. Such modifications or changes could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information(SAR)
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
Device types iSteady Pro3 (FCC ID:2AIB7HGS3) has also been tested against this
SAR limit.The highest SAR value reported under this standard during product
.certification for use when properly worn on the body is 0.664W/kg(Body 0mm).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>