deli S301 Thermal Receipt Printer User Manual

deli S301 Thermal Receipt Printer

Product Information

Specifications

• Compliance: FCC Part 15
• RF Exposure: General requirement met

Product Usage Instructions

Caution and Warning

FCC Warning Statement: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

Compliance with FCC Rules
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

General RF Exposure Requirement
The device has been evaluated to meet the general RF exposure requirement.

FAQ

• Q: Can I make modifications to the device?
  A: No, any changes or modifications not approved by the manufacturer can void your authority to operate the equipment.

• Q: What does the compliance with FCC Part 15 mean?
  A: Compliance with FCC Part 15 ensures that the device meets specific regulations set by the Federal Communications Commission regarding electromagnetic interference.

(This guide supports $301 and S302 series models, and takes one of these models as an example for explanation.)

Physical appearance and components

Understanding product interfaces

• Connect the adapter cable to the printer power interface.
• Connect the interface cable to the rear port of the printer back of the printesh register cable to the cash register connector at the Mouth.

Product standard number: GB/T 28165

Attention:
The transmission interface and appearance of the printer in the picture may vary depending on the type of model you purchased. Please refer to the actual product for the actual transmission interface and appearance.

Loading the Paper Roll

• Open the printer cover in the direction of the icon.
• Install the paper roll in the direction of the icon, paying attention to the direction of the paper.
• Pull out a piece of paper in the direction of the icon to the outside of the body and close the cover.
• Note : After installing the paper, the flip cover should be tightly closed toprevent the printer to from working improperly
  The specifications, accessories, parts, and program content of the model shall be based on the actual machine. Any changes are subject to no further notice

Bluetooth WiFi information printing reset method

Dial Switch Explanation

Soft Switch Instructions

1. Open the Printer Setup tool downloaded, select connection Port → Advanced Mode → Dip Settings
2. Open Dip settings → Check or cancel as needed → Finally click Set DiP to complete the settings

Note : baud rate is only for models with serial ports to achieve Its function.

Technical Parameter

WARRANTY CARD

Thank you for your purchase of our products. The interests of customers who purchase our products will be protected. For any malfunction due to product quality problems. please contact authorized local dealers or service centers with this receipt and the warranty card.

Warranty terms:

1. For product failures occur under normal operating circumstances, free-of-charge repair and spare parts replacement service shall be provided by our company within one year commencing from the date of purchase.
2. Customers are required to present this warranty card and the original purchase invoice to our company upon request for warranty service. This warranty card shall be valid only after the following form is filled out in detail and affixed with the official seal of the dealer.
3. No free-of-charge repair service shall be provided in the event of any of the following circumstances:
4. Expiration of the warranty period;
5. Damages caused by improper use, maintenance or storage not by the requirements of the user manual;
6. Failure or damage resulting from unauthorized disassembly, repair, or modification;
7. Failure or damage caused by force majeure;
8. Wear parts or accessories.

This warranty card is being delivered with the product, one card for one product. Please keep this warranty card in proper condition for free warranty service. There is no replacement if lost.
Date of Purchase:

This copy shall be cut along the dotted line and kept by the dealer.

CERTIFICATE

• Inspector:
• Date of Manufacture:

Warranty Terms

Warranty scope and period

1. The warranty is limited to product malfunctions caused by poor materials or manufacturing processes.
2. The warranty period is calculated from the date of purchase by the customer (based on the purchase invoice). If the customer is unable to provide an invoice From the date of production of the product.

Warranty period:

• The printer is complete for one year.
• The print head is guaranteed for 30 kilometers or one year, whichever comes first.

Warranty service principles

1. Free warranty for products that meet the warranty period and scope.
2. When conducting a warranty, a warranty card must be presented.
3. Maintenance services outside the warranty period or the warranty scope will be charged according to the standard by Deli.
4. If the product is disassembled or repaired without technical certification, the warranty will become invalid.
5. The repair machine must be packaged in its original packaging or in packaging with considerable protection, as the transportation package Damaged equipment is not covered by the warranty.

Non-Warranty Terms

1. There is no warranty card or the content of the warranty card has been altered.
2. Failure to maintain the printer according to the user manual resulted in damage to the printer.
3. The printer is damaged due to water ingress or foreign objects.
4. The print head is damaged due to the use of printing media with excessive thickness.
5. The use of inferior consumables resulted in damage to the print head.
6. Damage caused by improper usage environment or force.
7. Use the printer for other purposes beyond its intended use.
8. Damage caused by repairs by noncompetent technical engineers.

The final interpretation right of the above terms belongs to Deli Group Co.. Ltd.

Driver installation

• Double-click to open the driver zip folder via download and open the printer driver, click next.
• Select the system that matches your computer and click Install Printer Driver (N) when you are done.
• Select the corresponding printer model select the correct one and click next.
• Select the appropriate printer port and click Install
• Driver installation completed.

Warning : Operating this device in a residential environment may cause radio interference.
Warning: Sharp edges, do not touch.
Warning: Hot parts! Touching this component may burn your fingers.
Wait for half an hour after turning off the power before touching the component.

DELI GROUP CO., LTD.
Deli Industrial Zone, Ninghai County, Ningbo City, Zhejiang Province, China Made in China
info@nbdeli.com
www.deliworld.com
KEEP FOR FUTURE USE
Version : 1.0
Date : 04-2024

FCC Statement

This equipment has been tested and found to comply with the limits for a ClassB digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>