memorex CAB-8J870 Wood Finish Bluetooth LED Alarm Clock With Wireless Charger Instruction Manual

memorex CAB-8J870 Wood Finish Bluetooth LED Alarm Clock With Wireless

Charger

Product Usage Instructions

• Place your Qi-enabled device on the wireless charging pad for efficient charging. Ensure proper alignment for optimal performance.
• Press the ‘SET’ button to enter clock setting mode. Use the corresponding buttons to adjust the time, date, and alarm settings.
• To set an alarm, press the ‘Alarm’ button and use the controls to set the desired wake-up time. The alarm indicator will be displayed when the alarm is active.
• Activate Bluetooth on your device and pair it with the alarm clock to stream music wirelessly. Use the volume buttons to adjust the audio level.

FAQ

• Q: How do I reset the device?
• A: Locate the ‘RESET’ hole on the rear panel and use a small pin to press and hold the reset button for a few seconds to reset the device.
• Q: Can I charge non-Qi devices on the wireless charging pad?
• A: The wireless charging pad is designed for Qi-enabled devices. Non-Qi devices may not charge properly or may require additional accessories for charging.

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Explanation of Graphical Symbols

• The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

FOR YOUR RECORDS
For your assistance in reporting this unit in case of loss or theft, please record below the model number and serial number which are located at the bottom of the unit.

Please retain this information

• Model number………………………………………..
• Serial number…………………………………………
• Date of purchase…………………………………….
• Place of purchase……………………………………

To obtain service or product information, call 1-877-506-4900

FCC COMPLIANCE STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference with one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements.
To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation.

SAFETY INSTRUCTIONS

1. Read Instructions: All the safety and operating instructions should be read before the appliance is operated.

2. Retain Instructions: The safety and operating instructions should be well-kept for future reference.

3. Heed Warnings: All warnings on the appliance and in the operating instructions should be adhered to.

4. Follow Instructions: All operating and use instructions should be followed.

5. Power Sources: The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

6. Power-Cord Protection: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point at which they exit from the appliance.

7. Overloading: Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

8. Grounding or Polarization: Precaution should be taken to ensure that the grounding or polarization means of an appliance is not defeated.

9. Severe weather: In extreme weather such as lightning storms, or hurricanes, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the appliance due to unexpected power surges.

10. Water and Moisture: The appliance should not be used near water-for example, near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool, or a wet basement.

11. Heat: The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

12. Object/Liquid Entry: Care should be taken so that no object/liquid enters into the enclosure through openings.

13. Ventilation: The appliance should not be situated so that its location (on a bed, sofa, rug, or similar surface) or position (such as a bookcase or cabinet) interferes with its proper ventilation.

14. Mounting: The appliance should be mounted only as recommended by the manufacturer.

15. Cleaning: Only use a soft dry cloth to clean the appliance.

16. Servicing: The user should not attempt to service the appliance beyond that described in the user’s operating instructions. All other servicing should be referred to qualified personnel.

17. Replacement Parts: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer. Unauthorized substitutions may result in fire, electric shock or other hazards.

18. Damage Requiring Service: The appliance should be serviced by qualified service personnel when:

    • The power supply cord or plug has been damaged.
    • Objects have fallen into, or liquid has been spilled into the appliance enclosure.
    • The appliance has been exposed to rain.
    • The appliance has been dropped, or the enclosure damaged.
    • The appliance does not appear to operate normally or exhibit a marked change in performance.

19. Carts and Stands: An appliance and cart combination should be moved with care.
    Quick stops, excessive force, and uneven surfaces cause the appliance and cart combination to overturn.

20. Non-use Periods: The power cord of the appliance should be unplugged from the outlet/The batteries should be removed when the appliance is to be left unused for a long time.

PRODUCT OVERVIEW

TOP VIEW

FRONT VIEW

REAR VIEW

BOTH SIDE

1. Wireless Charging Pad
2. PM Indicator
3. Year/Clock
4. Alarm Indicator
5. Weekday
6. Low Battery Indicator
7. Date
8. VOL+/DIMMER/UP Button
9. VOL-/PAIR/DOWN/Alarm On/off Button
10. Power/Play, Pause/SET /SNOOZE Button
11. RESET Hole
12. DC IN Jack
13. Wireless charge indicator
14. Battery Compartment
15. Speaker

WIRELESS CHARGING

Wireless/Fast Charging
NOTE: Use only the included AC/DC power adapter. Unauthorized power adapters may cause damage or the wireless charger may malfunction.
Wireless/Fast charging is only compatible with supported devices and the included AC/DC power adapter.
On supported devices, if the “wireless charging” or “fast/rapid charging” feature is not active, you may need to enable it from your device’s Settings, Power, or Battery menu. Consult the user manual for your specific device.

During charging, the charging indicator will light on and light off repeatedly, when charging finishes, the charging indicator will stay lit.
NOTE: For the different thicknesses and material of the phone protective case, take off the case before charging to avoid the alarming(without sound) caused by foreign objects, abnormal functions, no charging or ineffective charging, etc..
Cautions

1. Do not use wireless chargers in severely hot, humid, or corrosive environments, to avoid circuit damage.
2. Do not place items with magnetic strips and RFID chips such as ID cards, Credit cards, etc near the clock to prevent failures of these items.
3. Please keep a distance of at least 30cm between implantable medical devices (pacemakers, implantable cochlear, etc.) and the wireless charger, to avoid potential interference with the medical device.
4. We recommend that you charge your phone without its phone case fitted for maximum performance. Some cases will interfere with the wireless charging. The wireless charger will stop charging if metal objects are detected.
5. Don’t place any metal objects on the wireless charging pad, these items include, but are not limited to keys, coins, hair clips, etc..

POWER

• Plug the adapter into a standard power outlet.

• Requires 4 “AAA”,1.5V batteries(not included), for operation.

NOTE: If using the batteries for operation, the low battery indicator will blink when the unit is at a low battery level.

BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:

1. Warning – Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.

2. Use only the size and type of batteries specified.

3. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. A reversed battery may cause damage to the device.

4. Do not mix different types of batteries (e.g. Alkaline, Rechargeable, and Carbon-zinc) or old batteries with fresh ones.

5. If the device is not to be used for a long time, remove the batteries to prevent damage or injury from possible battery leakage.

6. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture.
   (Follow the battery manufacturer’s directions.)

7. Remove batteries promptly if consumed.

8. Clean the battery contacts and also those of the device before battery installation.

BLUETOOTH OPERATION

After the initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your device should become unpaired or if any pairing issues should occur, remove the unit from your Bluetooth settings and follow these steps again.

1. Press and hold the button to switch to Bluetooth mode, “bt” will appear on display for a few seconds and disappear, and a piece of tone is heard.
2. Activate the Bluetooth function on your Bluetooth device, and select the “MX-CRBT250” to pair.
3. When paired, another piece of tone will be heard.
4. Audio played through the connected Bluetooth device should now be heard through the speakers. Use the controls on the connected Bluetooth device to select and begin playing audio.
5. While playing, press the button to pause, press it again to resume.
6. Press the VOL+ or VOL- button to increase or decrease volume.
7. Press and hold the PAIR button to disconnect the current connection.

CLOCK AND ALARM SETTING

1. Press and hold the button to enter standby mode.
2. Press the SET button, the “year” will blink. Press the UP or DOWN button to set the “year”. Press the SET button to confirm.
3. The “month” will blink. Press the UP or DOWN button to set the “month”. Press the SET button to confirm.
4. The “day” will blink. Press the UP or DOWN button to set the “day”, the weekday will change accordingly. Press the SET button to confirm.
5. The time system “12 hours” will blink. Press the SET button to confirm. When the time arrives at midnight, the PM indicator will light up.
6. The “hour” will blink. Press the UP or DOWN button to set the “hour”, press the SET button to confirm.
7. The “minute” will blink. Press the UP or DOWN button to set the “minute”, press the SET button to confirm.
8. The “–AL” will blink. Press the UP or DOWN button to turn on or off the alarm, press the SET button to confirm. when set to on, “onAL” will appear, and the alarm indicator will light up.
9. The alarm “hour” will blink. Press the UP or DOWN button to set the “hour” and press the SET button to confirm.
10. The alarm “minute” will blink. Press the UP or DOWN button to set the “minute”, Press the SET button to confirm and finish the clock and alarm setting.

NOTE: For fast turning on or off the alarm function, press the DOWN button.

STOP THE ALARM AND SNOOZE

1. When the alarm rings, the alarm indicator will blink, press the UP or DOWN button on the alarm.
2. When the alarm rings, the alarm indicator will blink, press the SNOOZE button to enter snooze mode. After another 9 minutes, the alarm will ring again.

DIMMER

1. Press and hold the button to enter standby mode.
2. Press the DIMMER button repeatedly to adjust the display brightness.

CHARGING INDICATOR

TROUBLESHOOTING

Check the following before requesting service:

SYMPTOM

|

POSSIBLE CAUSE

|

POSSIBLE SOLUTION

---|---|---
Can’t power on| The adapter is not plugged or the AC outlet is not switched on.| Connect the adapter to the AC outlet and switch on the outlet.
No sound or sound weak| The volume level in the minimum position| Raise the volume level by pressing the VOL+ Button on the unit
The volume level of the paired/connected device is at a low level| Raise the volume level of the paired/connected device
Sound distortion| The volume level is too high| Reduce the volume level by pressing the VOL- Button on the unit
The volume level of the connected/paired device is too high| Reduce the volume level of the connected/paired device
Bluetooth not functioning| The Bluetooth device did not pair with the unit| Pair the Bluetooth device with the unit
The external Bluetooth device is too far from the unit| Place the external Bluetooth device close to the unit

SPECIFICATIONS

• Power Input: AC 100-240V 50/60Hz
• Power source: DC 9V 1300mA
• Bluetooth Version: 5.0
• Bluetooth Working Range: About 10m in open area
• Audio Output: 2 x 1.5 W
• Wireless Charging Output: Up to 5 W
• Maximum operation temperature: 40℃

PACKAGE INCLUDES

• 1 X Main Unit
• 1 X User Manual
• 1 X AC/DC Adapter

Disclaimer
Product features, specifications, and appearance are subject to change without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>