memorex LG XBOOM ON7 Bluetooth Speaker Party System 500W User Manual

: June 16, 2024
: memorex

Table of Contents

memorex LG XBOOM ON7 Bluetooth Speaker Party System 500W
Product Information
Product Usage Instructions
INTRODUCTION
IMPORTANT WATERPROOF/SAFETY INFORMATION
PACKAGE CONTENTS
IMPORTANT SAFETY PRECAUTIONS
CHARGING YOUR SPEAKER
A QUICK LOOK AT YOUR SPEAKER
PARING BLUETOOTH DEVICES
TWS FUNCTION
TROUBLESHOOTING
FCC
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

memorex LG XBOOM ON7 Bluetooth Speaker Party System 500W

Product Information

Specifications:
- Product Name: XBoom
- Waterproof: Yes
- Power Cord: USB-C
- Charging Port: Type-C (DC 5V/1A)

Product Usage Instructions

Charging:
- Use the USB-C power cord provided in the accessories to connect the DC 5V charger / USB port on your computer/notebook/power bank and the speaker for charging.
- The red indicator will turn on to indicate that the unit is charging and then will turn off when fully charged.
- Tips: There will be a beep when the battery is low and needs to be recharged. To maintain the battery’s durability, fully charge the speaker if it is not used for a long time.
Buttons and Functions:
- Play / Pause / Hands-free Button:
- Press the button when the music is playing to pause the music.
- Press the button when the music is paused to begin playing again.
- Press the button to answer/reject a phone call.
- Power / Light Button:
- Press and hold the button to power on/off the speaker.
- Press the button to change the various light show modes when XBoom is on.
- TWS / EQ Button:
- Short press the button to achieve TWS paired or TWS cleared.
- Press and hold the button to switch EQ modes (Indoor or Outdoor).
- Next track / Vol + Button:
- To skip to the next track, press and hold the button.
- To increase the volume, press the button.
- Previous track / Vol – Button:
- To go back to the previous track, press and hold the button.
- To lower the volume, press the button.
- Mic: Used for hands-free phone calls.
- Indicator: Displays the status of the speaker.
- Type-C Charging port (DC 5V/1A): Connects the power cord for charging.
Pairing Bluetooth Audio Device:
- Make sure your Bluetooth audio source is held within three meters of your speaker.
- Follow the specific instructions provided by your audio device to enable pairing mode.
- On the XBoom speaker, press and hold the Power/Light button until the indicator light flashes.
- This indicates that the speaker is in pairing mode.
- On your audio device, search for available Bluetooth devices and select “XBoom” from the list.
- Once connected, you can start streaming music or making wireless telephone calls.
FAQ
- Problem: The speaker doesn’t connect to the device.
- Solution: Disable and then enable the Bluetooth feature on your device. If the speaker was previously connected, delete it from the Bluetooth list on your device, and then search again.
- Problem: A low-battery voice is heard every few seconds.
- Solution: The speaker needs to be charged. Connect the power cord and charge the speaker until the battery is fully charged.
- Problem: Bluetooth connection distance cannot reach 33ft.
- Solution: Avoid operating the Bluetooth speaker in areas of strong electromagnetic interference, such as near induction cookers, large power fans, motors, etc. Move the speaker closer to the Bluetooth device. Fully charge the speaker and try again.

INTRODUCTION

Thank you for choosing the XBoom as your source of entertainment!
This speaker can be used via a Bluetooth connection with a tablet, some computers and some smartphones to stream music and make wireless telephone calls.
To make the most of the features of your speaker, we recommend that you carefully read this user guide first.

IMPORTANT WATERPROOF/SAFETY INFORMATION

XBoom is waterproof, which means the speaker can be heavily splashed with water or left in the rain.
If the speaker gets wet, it is recommended that you dry the speaker completely before using it again.
Please note: please make sure that the cover is closed and secure before using it in a wet environment.

PACKAGE CONTENTS

1* Memorex Xboom
1* Charging cable
1* User manual

IMPORTANT SAFETY PRECAUTIONS

When using your Memorex Xboom, basic safety precautions should always be followed, including the following:

Keep this product and its charging cable away from excessive heat.
Do not operate this device with a damaged cable or after it has malfunctioned or has been damaged in any manner.
Do not disassemble your device.

CHARGING YOUR SPEAKER

Use the USB-C power cord in the accessories to connect the DC 5V charger / USB port on your computer/notebook/ power bank and speaker for charging.
The red indicator will turn on to indicate that the unit is charging and then will turn off when fully charged.
- Tips: There will be a beep when the battery is low and needs to be recharged.
- To maintain the battery’s durability, fully charge the speaker if it is not used for a long time.

A QUICK LOOK AT YOUR SPEAKER

Play / Pause / Hands-free Button
- Press the “ ” when music is playing to pause the music.
- Press the “ ” when the music is paused to begin playing again.
- Press the “ ” to answer/reject the phone call.
Power / Light Button
Press and hold the “ ” to power on/ off
Press the “ ” to change the various light show modes when Xboom is on.
TWS / EQ Button
Short press the “ ” to achieve the TWS paired or TWS cleared.
Press and hold the “ ” to switch EQ modes (Indoor or Outdoor)
Next track / Vol + Button
To skip to the next track, press and hold the” “Button. To increase the volume, press the” “Button.
Previous track / Vol – Button
To go back to the previous track, press and hold the “ ” Button.
To lower the volume, press the” ” Button.
Міс
Indicator
Type-C Charging port (DC 5V/1A)

PARING BLUETOOTH DEVICES

PARING BLUETOOTH DEVICES TO YOUR SPEAKER

To pair your Bluetooth audio device to your Bluetooth Speaker for the first time, follow the steps below

Make sure your Bluetooth audio source is held within three meters of your speaker. Press and hold the “ ” switch on your speaker to power on The LED light will blink blue to indicate that you have entered pairing status.
Search Bluetooth devices and select “XBoom”.
Once paired. the blue LED light will be solid and you can use your speaker to listen to audio from your Bluetooth sound source.
Press and hold the “ ” to disconnect the Bluetooth.

Note:

If no Bluetooth device becomes available, the speaker will power off automatically after 10 minutes.
If the speaker is connected to the device without playing music, the speaker will power off automatically after 30 minutes.

USING THE HANDS-FREE FUNCTION

When an iPhone or other smartphone is connected to your speaker follow the steps below to take calls hands-free.

Press “ ” to pick up the call.
Press the “ ” twice to reject the call.
During call. Press” ” again to hang up the call.

TWS FUNCTION

If you have two of XBoom, you can use multiple points to achieve wireless stereo combined playing music.

Turn on two speakers and make sure there is no Bluetooth connection with the device.
When the speakers enter Bluetooth mode, press the “ ” button on any of the speakers to start the TWS connection.
Under connection, search Bluetooth device and select” XBoom”.
When the device and the units are connected, the blue LED of both units will be solid.
Short press the “ — ” button on one of the speakers to disconnect the TWS connection.

TROUBLESHOOTING

Problem	Solution
The speaker doesn’t connect to the device.	– Disable and then enable the

Bluetooth feature.

– If the speaker was previously connected, delete it from the Bluetooth list on your device, and then search again.

A voice “low battery” is heard every few seconds.| The speaker needs to be charged.
Bluetooth connection distance cannot reach 33ft.| – Avoid operating the Bluetooth speaker in areas of strong electromagnetic interference, such as near induction cookers, large power fans, motors, etc.

– Move the speaker closer to the Bluetooth device.

– Fully charge the speaker and try again.

The speaker does not charge.| – Make sure the connector on the cable is correctly aligned with the connector on the speaker.

– Try another charging source.

– Secure both ends of the USB-C cable.

– If your speaker has been exposed to high or low temperatures, let it return to room temperature and then try charging again.

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
RF warning for Mobile devices:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.