memorex MX-CR30 Digital Bluetooth FM Clock Radio Instruction Manual

Memorex MX-CR30 Digital Bluetooth FM Clock Radio

Specifications

• Model: MX-CR30
• Bluetooth-enabled FM Clock Radio
• USB Charging Port
• AUX IN Jack
• DC IN Jack
• Alarm Functionality
• Dimmer Control

Product Usage Instructions

Safety Instructions

1. Do not use the product near water.
2. Clean the product only with a dry cloth.
3. Ensure ventilation openings are not blocked.
4. Avoid placing the product near heat sources.
5. Protect the power cord from damage.
6. Unplug the product during lightning storms or prolonged periods of non-use.
7. Use batteries as instructed and dispose of them properly.
8. Seek professional servicing if the product is damaged.
9. Do not make unauthorized modifications to the product.

Function and Controls

The product features various controls including a USB Charging Port, AUX IN Jack, DC IN Jack, Tuning Buttons, Power/Source Button, Play/Pause/FM Auto Scan Button, Volume Controls, Time Set/Preset Button, and Snooze/Sleep Button.

Steps to Use

1. Connect the power adapter to the DC IN Jack.
2. To charge a device, connect it to the USB Charging Port.
3. To listen to music, connect a device to the AUX IN Jack.
4. Use the Tuning Buttons to find your desired radio station.
5. Set alarms using the Volume+/Alarm 2 Button and Volume-/Alarm 1 Button.
6. To adjust brightness, use the Dimmer Button.

FAQ

Q: Can I use rechargeable batteries with this product?

A: Yes, you can use rechargeable batteries like ni-cad or ni-mh, but do not mix them with other types of batteries.

Q: How can I reset the alarm settings?

A: To reset alarm settings, press and hold the Time Set/Preset Button until you hear a confirmation beep.

Q: What should I do if the product gets wet?

A: If the product gets exposed to liquid, unplug it immediately and do not use it until it has completely dried to prevent any electric shock hazards. Seek professional servicing if needed.

SPECIAL NOTES

For users in the U.S.

• CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
• CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
• NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Explanation of Graphical Symbols

• The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
• WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

FCC COMPLIANCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not Installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). No userserviceable parts inside. Refer servicing to qualified service.

FCC NOTICE:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including that may cause undesired operation.

FCC Radiation Exposure Statement:

The product complies with the US portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such a function is available. This transmitter must not be co- located or operating in conjunction with any other antenna or transmitter.

WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO LIQUID, RAIN, OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

1. Do not use this product near water.
2. Clean only with a dry cloth.
3. Do not block any ventilation openings. Install under the manufacturer’s instructions.
4. Do not install near any heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
5. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the product.
6. Unplug this product during lightning storms or when unused for long periods.
7. Do not mix old and new batteries and do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.
8. Batteries should be recycled or disposed of as per state and local guidelines.
9. Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the product, the product has been exposed to rain or moisture, does not operate normally, or has been dropped.
10. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FUNCTION AND CONTROLS

1. USB Charging Port
2. DC IN Jack
3. AUX IN Jack
4. Tuning+/Minute Button
5. Power/Source Button
6. Play/Pause/FM Auto Scan Button
7. Tuning-/Hour Button
8. Dimmer Button
9. Volume+/Alarm 2 Button
10. Volume-/alarm 1 Button
11. Time Set/Preset Button
12. Snooze/Sleep Button

Power Operation

Plug the included AC/DC power adapter (120V/60Hz 5V) into the DC POWER INPUT on the dock and an AC power outlet to power the dock.

Battery Backup

The battery backup is intended for short power outages only. The clock radio’s primary functions cannot run off of the battery backup alone. Requires 2 AA- size, batteries (not included).

Clock / Sleep Timer

Setting the Clock

1. Press and hold the power off mode Time Set/Preset button until the display begins flashing.
2. Press the Hour and Minute buttons to adjust the time. The PM indicator will light when the hour is set in the PM.
3. Press the Time Set/Preset button again to finish, or wait for the display to stop flashing.

Setting the Sleep Timer

1. Power on the radio on press the Snooze button to adjust the timer (90, 80, 70, 60, 50, 40, 30, 20, 10 min or OFF).
2. Once the set sleep time has expired the clock radio will automatically power off.

Alarm Setting the Alarm

1. If in radio mode, press and hold the POWER/SOURCE button to turn the unit off.
2. Press the Volume+/Alarm 2 button or the Volume-/ Alarm 1 button.
3. Press the Tuning-/Hour button to adjust the hour.
   • The PM indicator will light when the hour is set in the PM
4. Press the Tuning+/Minute button to adjust the minute.
   • The Alarm One or Alarm Two indicator will come on.
5. Press the Volume+/Alarm 2 button or Volume-/ Alarm 1 button repeatedly to switch between Radio(FM) Buzzer(bb) or off.
6. Once the set alarm time is reached, the alarm will sound.
7. To set the other alarm, follow the above steps and choose the alarm not currently set.

Canceling the Alarm

1. Follow the instructions for Setting the Alarm.
2. Press the Volume+/Alarm 2 button or Volume-/ Alarm 1 button repeatedly until the display shows “OFF” and the indicator will no longer light.

Snooze and Alarm Reset

• When the alarm sounds, press the Snooze/Sleep button to delay the alarm for an additional 9 minutes.
• Press the Power/Source button to turn the alarm off unit the set alarm time is reached aqain.

Radio

Radio Reception

To improve FM radio reception, adjust the position of the clock radio.

Tuning the FM Radio

1. Power on the radio and press the Power/Source button again to switch the FM radio mode.
2. Press the Tuning ‡ buttons to find the desired radio frequency.
3. Press the Volume $ buttons to adjust the volume of the radio.

Saving a Station as a Preset

1. With the radio on, press and hold the Play/Pause/ FM Auto Scan Button to search stations in the FM band, and will store stations automatically.
2. Press the Tuning ‡ buttons to choose the desired preset station, 1 to 20 through the FM band.

AUX IN Connect to External Device

1. Plug one end of an audio 3.5mm plug cable (not included) into the AUX IN jack at the top side of unit and the other end of the cable to the headphone jack of your digital audio player.
2. Press and hold the Power/Source button to turn on the unit.
3. Press the Power/Source button again to select AUX IN mode.
4. Make sure your external music player is turned on.
5. Start music playback on your external music player.
6. Slowly adjust both the volume controls of your unit and the external device until you reach a comfortable listening level.

USB

Connect the USB Port for Charging

This unit has built-in 5V / 2.4A output power for charging mobile phones, tablets or portable audio devices.

1. Plug the USB cable (not included) into the USB Charging Port.
2. Plug the other end of the USB cable into your device to activate charging automatically.

CARE AND MAINTENANCE

1. Clean the unit with a soft, damp (never wet) cloth. Solvent or detergent should never be used.
2. Avoid operating your unit under direct sunlight or in hot, humid, or dusty places to reduce the risk of fire or electric shock.
3. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors.
4. For better clock display clarity, avoid operating the unit under direct sunlight or in strong room illumination.
5. Unplug the AC adapter from the unit and the electrical power outlet immediately in case of malfunction.

TROUBLESHOOTING GUIDE

Reposition the unit until the best reception is obtained.

FM radio has no sound| Volume at minimum| Increase Volume

SPECIFICATIONS

• Frequency: FM 87.5 – 108 MHz
• AC Adapter: Input: 100-240V/60-50Hz
• Output: DC = 5V 2.4A
• Back-up Battery: 2 x DC1 .5V AA batteries (Not Included) USB Charging Output: 5V 2.4A

FOR YOUR RECORDS

• For your assistance in reporting this unit in case of loss or theft, please record below the model number and serial number which are located at the bottom of the unit.
• Please retain this information.
• Model number __
• Serial number _ __
• Date of purchase ____
• Place of purchase ___
• To obtain service or product information, call 1-877-506-4900

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>