Memorex MCB428B Aluminum Wireless Clock Radio User Manual
- June 12, 2024
- memorex
Table of Contents
Memorex MCB428B Aluminum Wireless Clock Radio
Features
- Bluetooth wireless – range: 60 ft.
- Built-in stereo speakers
- Voice prompts
- Speakerphone
- Built-in FM radio and Auto Scan radio presets
- Digital clock
- Dual alarm
- Negative LCD display with backlight
- Multi-step display dimmer
- Time, temperature, power percentage, and function display
- Aux In (3.5mm audio input)
- Micro SD memory card reader
- Micro USB power input for battery recharge
- Built-in rechargeable battery
- Battery life approx. 7 hours at 100% volume
Includes
- 3.5mm audio cable
- Micro USB to USB cable
- Antenna attachment
- Warranty
Power & Charging
Plug the AC power cord into a standard power outlet.
Setting the Clock
- With the unit off, press the button. The display will begin flashing.
- Use the Volume buttons to set the time. Press the buttons to switch between hours and minutes. Note the PM indicator.
- Press the button to finish setting the time.
Alarm
Setting the Alarm
- With the unit off, press the button. The display will begin flashing.
- Press the button until the display reads “AL1”.
- Use the Volume buttons to set the alarm time. Press the buttons to switch between hours and minutes. Note the PM indicator.
- Press the button again, and use the Volume buttons to select “ON” or “OFF”.
- Press the button again, and use the Volume buttons to select the Alarm type. There are 5 different alarm sounds, or you can select TF (SD Card), or RAD (radio). Note: If TF is selected when there is no SD card loaded, the unit will play the radio when the alarm sounds.
- Press to confirm and set the alarm.
- When the alarm rings, press any button to stop it.
- To set Alarm 2, press the button until “AL2” appears on the display and follow the steps above.
Snooze & Alarm Reset
After the alarm sounds:
- Press the button to turn the alarm off.
- Press the button to snooze the alarm for 9 minutes.
FM Radio
Tuning the FM Radio
- Insert the FM radio antenna into the Aux In port on the side of the speaker.
- Press the button to turn the unit on, then press the M button to switch to FM Mode. A voice prompt will sound from the speaker and the display will show the radio frequency.
- To automatically scan radio frequencies and set presets, press and hold the M button. When finished, use the buttons to change presets.
Bluetooth Wireless
Pairing to a Bluetooth Device and Playing Audio
- Press and hold the button to power the speaker. It should start in Bluetooth Mode, indicated by a voice prompt and a symbol on the display.
- Press and hold the button, the symbol on the display will begin flashing quickly and another voice prompt will sound from the speaker. When pairing, remain within 3 feet of the unit.
- Using the controls on your Bluetooth device, select MCB428 from your Bluetooth settings to pair. When successfully paired, the BT symbol on the display will turn solid and a voice prompt will confirm the connection. You can refer to the user’s manual for your specific device for instructions on pairing and connecting Bluetooth devices.
- Audio played through the connected Bluetooth device should now be heard through the speakers. Use the controls on the connected Bluetooth device to select and begin playing audio. Play, pause, or skip audio using the controls on the device or the unit.
Speakerphone
- To accept or end a phone call coming through the connected Bluetooth phone, press the button on the speaker.
Previously Connected Devices
- This unit can remember multiple Bluetooth devices and will always try to reconnect to the last device used.
- To reconnect to a different device, turn off Bluetooth on unwanted devices, then access the Bluetooth settings menu on the device you wish to use and connect to MCB428.
- If the unit should become unpaired or will not connect normally, delete the unit for your device’s Bluetooth settings menu (“Forget This Device”), turn the unit off and on again, and perform the Bluetooth connection again.
Memory Card
The speaker supports MP3/WAV audio files, and SD cards up to 32GB.
- Insert a Micro SD memory card into the memory card slot.
- Press and hold the button to turn the unit on, then press the M button to switch to SD Card Mode. A voice prompt will sound from the speaker and the display will show the radio frequency.
- Use the controls on the speaker to play audio on the card.
Aux In
Requires a 3.5mm audio cable.
- With the unit powered ON, connect a 3.5mm audio cable to the Aux In on the rear of the unit and the audio output on an audio device.
- Press the Source button to select Aux-In Mode. Use the controls on the connected device to play your audio through the unit.
FREQUENTLY ASKED QUESTIONS
What is the Memorex MCB428B Aluminum Wireless Clock Radio?
The Memorex MCB428B is a clock radio with wireless connectivity and aluminum design, offering features such as radio playback, alarm functions, and more.
What are the key features of the Memorex MCB428B Clock Radio?
The key features include wireless Bluetooth connectivity, clock with alarm functions, FM radio, and an aluminum exterior.
Can I connect my devices to the Memorex MCB428B Clock Radio using Bluetooth?
Yes, the clock radio supports Bluetooth connectivity for wireless audio streaming from devices like smartphones and tablets.
What is the design of the Memorex MCB428B Clock Radio?
The clock radio typically features an aluminum exterior, which gives it a modern and sleek look.
Is the Memorex MCB428B Clock Radio equipped with a digital display?
Yes, the clock radio usually features a digital display that shows the time, radio station, and other information.
Does the clock radio have dual alarms?
Yes, the Memorex MCB428B often comes with dual alarms, allowing you to set different wake-up times for different days.
Can I wake up to the FM radio using the clock radio's alarms?
Yes, you can set the alarms to wake you up to your favorite FM radio station.
What type of sound quality can I expect from the clock radio's speaker?
The sound quality is generally suitable for casual listening, offering decent audio playback.
Is there a snooze function on the Memorex MCB428B Clock Radio?
Yes, the clock radio usually includes a snooze function that lets you snooze the alarm for a few extra minutes.
Does the clock radio have a backup battery for power outages?
Some versions of the Memorex MCB428B might include a backup battery to maintain time and alarm settings during power outages.
Is there a USB charging port on the clock radio?
Some models might come with a USB charging port that you can use to charge your devices.
What is the range of Bluetooth connectivity on the Memorex MCB428B Clock Radio?
The Bluetooth range is typically around 30 feet (10 meters), but it can vary depending on the environment.
Can I listen to music using sources other than Bluetooth, like an MP3 player or CD player?
Can I listen to music using sources other than Bluetooth, like an MP3 player or CD player?
Does the clock radio display show the time in 12-hour or 24-hour format?
The clock radio usually offers the option to display the time in both 12-hour and 24-hour formats.
Can I set different alarm tones or music tracks for each alarm on the Memorex MCB428B Clock Radio?
This feature can vary depending on the model, so you should check the specifications to confirm.
Download the PDF Link:Memorex MCB428B Aluminum Wireless Clock Radio User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>