PYLE PYHS24NS Portable Speaker User Manual
- June 26, 2024
- Pyle
Table of Contents
PYLE PYHS24NS Portable Speaker
Specifications
- Brand: PYLE
- Website: PyleUSA.com
- Contact: Phone – (1)718-535-1800,
- Email – [email protected]
Product Information
The PYLE device is a multi-functional audio system that features various input options and control functions for an enhanced user experience. It includes a power switch, LED light switch, microphone input jack, AUX input jack, USB and Micro SD memory card slot, DC 5V input jack, and more.
WARNING
- DO NOT place objects on top of the device, as objects may scratch the device.
- DO NOT expose the device to dirty or dusty environments
- DO NOT insert any foreign objects into the device
- DO NOT expose the device to strong magnetic or electrical field
- DO NOT use the device in the rain
- Please check with your Local Authority or retailer for proper disposal of electronic products
- DO NOT disassemble the device. Only a certified service technician should perform the repair.
- The device has apertures to disperse heat. DO NOT block the device ventilation, the device may become hot and malfunction as a result.
illegal operation may cause personal injury, which could be fatal and may cause property damage.
Product Usage Instructions
Control Board Functions
- Ensure not to place objects on top of the device to prevent scratching.
- Avoid exposing the device to dirty or dusty environments.
- Do not insert foreign objects into the device.
- Avoid exposure to strong magnetic or electrical fields and refrain from using the device in the rain.
- For proper disposal, consult your Local Authority or retailer regarding electronic products.
- Power Switch
- LED light switch
- microphone input jack
- AUX input jack
- USB and Micro SD Memory Card Slot
- DC 5V input jack
- Short Press to choose the mode
- MENU: After pressing the MENU button to select, press the “Previous ” button or “Next” button to control
- E: Microphone Echo
- E: Music Treble Control
- B: Music Bass Control
- LED mode
- The last song for USB mode, the last channel for FM mode
- Play/pause on USB mode, scan song on FM mode,long for TWS function on wireless mode
- Next song for USB mode, next channel for FM mode
- Master Volume control
- Microphone volume control knob
Remote Control Functions
- Use the standby button to turn the device on/off.
- Choose input sources such as AUX, FM, BT, or USB signal.
- Utilize the mute button for sound control and play/stop buttons for different modes.
- Adjust speaker volume, select songs directly, and control EQ effects as needed.
- Standby button
- Choose input AUX/FM/BT/USB signal
- Mute button
- Play/Stop button on MP3 mode, scan function on FM mode.
- The next song is on a USB/Micro SD card, next channel is on FM mode.
- Previous song on USB/Micro SD card, last channel on FM mode
- EQ effect on MP3 mode
- Increase speaker volume
- Choose the song number directly on MP3 mode
- Stop button
- Decrease music volume
- Repeat the song on a USB/Micro SD memory card
TROUBLESHOOTING
This device complies with part 15 of the FCC Rules.
Operation is subject to the condition that this device does not cause harmful interference
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm of the radiator of your body: Use only the supplied antenna.
FCC ID : 2AQ8H-PYHS24NS
Troubleshooting
| Fault | Possible Cause | Solution |
|---|---|---|
| No input sound source | No sound / Volume is too low. | Use a better music |
signal / Adjust volume.
Distortion of sound| Volume too high / Speaker may be damaged.| Turn down the
volume / Repair or replace the speaker if
damaged.
Karaoke does not work| Microphone plug not fully inserted / Microphone switch
off /
Microphone volume at lowest position.| Plug microphone properly / Turn on
microphone switch / Adjust
microphone volume.
MP3 does not play| Incorrect audio format in U disc / Improper operation
causing
disorder / USB disc disconnected.| Convert audio format to MP3 / Reboot the
machine / Insert USB
disc properly.
Frequently Asked Questions (FAQ)
Q: How can I adjust the EQ settings on the device?
A: You can adjust the EQ settings using the remote control by selecting
the EQ effect button in MP3 mode.
Q: Can I use the device outdoors?
A: It is recommended to avoid using the device in rainy conditions or
extreme outdoor environments to prevent damage.
Q: What should I do if the device heats up excessively?
A: Ensure that the ventilation apertures are not blocked and allow the
device to cool down before further use.