FITFIU MC-160 Ultra Compact Foldable Treadmill Instruction Manual

FITFIU MC-160 Ultra Compact Foldable Treadmill

PRODUCT REVIEW

PRODUCT DESCRIPTION

Contents of the box

• Estructura base / base structure

• Instructions / Instrucciones

• Round knob / Perilla redonda

• Safety key Llave de seguridad

• 6 mm Hexagon wrench / Llave hexagonal 6mm

• Silicone oil / Aceite silicona

ASSEMBLY

Step by step

1. Loosen the locking knobs on the right and left handlebar support tubes to raise them up. One person should hold the right and left handlebar support tubes in place while the other person tightens the locking knobs.
   

2. A. Lift the computer console to align the screw holes under the handrail.
   B. Raise the display screen, use two computer knobs to tighten the computer console.
   

3. Put away the display screen and semi-release the knobs on the computer to fold the computer console.
   

4. Loosen the locking knobs, and the right and left handlebar support tubes to the correct position and tighten them again.
   

PRODUCT USE

Magnetic emergency stop system

The product is equipped with a “magnetic emergency stop system”. This safety strap must be attached to the console for it to work. It is designed to attach to clothing so that if you walk off or fall off the treadmill, it will stop automatically, helping to prevent injury.

Before starting a workout, make sure the safety strap is properly attached to the console and that the clip is securely attached to your clothing.

WARNING! If the device is switched on, but the safety strap is not connected, “- – -” appears on the display and the device cannot be started.

Commissioning

The equipment has a computerised display that provides you with controls for the operation of the unit, as well as information about the workout, duration, speed, distance travelled, etc. To use the equipment:

1. Plug the equipment into a mains socket.
2. Turn the power switch, located on the front of the unit, to the “ON” (“I”) position.
3. Fix the safety strap to the console.

Your tape is ready!

BEWARE! Always stand on the side rails before starting the machine. Never stand on the belt and then start the machine.

Programs

Display

The display shows current information, such as current speed, elapsed or remaining time, calories remaining, etc.

Safety key function
Unplug the safety key and window display “E7” the treadmill stop running, and beep alarm sound appears, the electronic watch display 2 seconds when put on the safety key, all data zero.

MAINTENANCE

General

• Make sure that you have switched off the device and disconnected the power plug before maintenance.
• Do not use abrasives or solvents to clean the tape, as this may damage the finish and functionality.
• Take care that excessive moisture does not enter the display panel as this may damage it.
• Keep the equipment, especially the display console, out of direct sunlight.
• To clean around the plug and control panel use a soft dry cloth, never use a wet cloth.
• Do not use the treadmill in a wet or dusty environment as this may cause leakage or mechanical failure.
• Use this product on a flat surface.

Daily maintenance

Clean regularly to remove dust and sweat to protect the components. You should clean both sides of the exposed part of the belt to avoid residue. Use a damp cloth with soap to clean the ribbon. Do not use a cleaner. Wipe the sweat off the handrail and the strap after use.

Lubricant use

The platform and treadmill have been lubricated at the factory with an anti- static lubricant, but we can re-lubricate it. Suggestion:

• Use of – 3 hours per week—–lubricate every 6 months.

• Use 4-7 hours per week—–lubricate every 3 months.

• Use of + 8 hours per week—–lubricate once a month

Belt deflection adjustment

To improve the use of the belt, you can adjust it if you notice a deviation of the direction after continuous use. To do this, adjust the bolts at the front of the base with the Allen key provided as shown in the picture below.

• If the belt runs to the left, turn the left adjustment bolt 1/4 turn clockwise and the belt will correct itself.
  

• If the tape is shifted to the right, turn the right adjustment bolt 1/4 turn clockwise until it is centered.
  

• If the tape slips during use, turn off and unplug the machine. Turn the left and right rear roller adjustment bolts 1/4 turn clockwise, then turn the belt on at 5 – 10 km. Repeat this procedure until the belt no longer slips.
  

WARNING! The belt should not be too tight as this can cause noise and possible damage to the engine.

Adjustment of the transmission belt
If the drive belt becomes loose, use the spanner clockwise to turn the bolt until the belt no longer slips..
WARNING! Frequently clean any objects or dust that may fall into the strap.

Correct arrangement of the ignition device
Do not touch the power plug or disconnect it with wet hands. When pulling on the plug, hold the plug by the plastic part, not directly on the cord. Do not place excessive weight on the cord. Do not wrap the cord around the machine to avoid damaging it. If the plug, cable or connection is loose, do not use the appliance.

TRANSPORT AND STORAGE

The manual folding system of the belt is fast and safe. It also has two wheels for easy transport from one place to another in the house. Store the equipment in a clean and dry indoor environment. Never leave or use the unit outdoors. Make sure that the main switch is turned OFF (“O”) and the power cord is disconnected from the mains.

You can store the treadmill under the bed or leaning against the wall.

Disposal And Recycling

Los productos desgastados son potencialmente reciclables y no deben desecharse en la basura habitual. Ayúdanos a proteger el medio ambiente y a preservar los recursos naturales. Deshazte del aparato de manera ecológica. No lo tires con la basura doméstica. Sus componentes de plástico y de metal se pueden separar y reciclar. Lleva este aparato a un centro de reciclado homologado (punto verde). Los materiales utilizados en el embalaje de la máquina son reciclables: por favor, tíralos en el contenedor adecuado.

GUARANTEE

This product is guaranteed for 3 years from the date of purchase. The warranty covers breakdowns and malfunctions of components not considered as consumables*, provided that it is used in accordance with its intended use and according to the instructions in the manual. In order to claim under the warranty, proof of purchase (receipt or invoice) is required and the product must be complete and with all its accessories.

The warranty clause does not cover deterioration caused by wear and tear, lack of maintenance, negligence, incorrect assembly or improper use (knocks, non- compliance with power supply advice, storage, conditions of use, etc.). The consequences of the use of accessories or spare parts which are not original or not suitable for the assembly or modification of the appliance are also excluded from the guarantee.

*for more information on the components covered by the warranty, visit the website www.fitfiu-fitness.co

ANNEX

TROUBLESHOOTING/PROBLEM SOLVING

B. Place the safety strap in the correct location.
The tape skates| The tape is loose| Adjust the belt tension.
Treadmill oscillates when stepped on| A. Not sufficiently lubricated. B. It is too tight| A. Lubricate the running board.
B. Adjust the belt tension
Tape is not centred| The tension of the treadmill is incorrectly set on the rear wheel.| Adjust the belt alignment.
Display shows: E00 or E07| The safety sensor is not in place| Position the safety sensor in the correct place on the console.
Display shows: E01 or E13| A communication problem has been detected between the drive disk and the console.| Check the connections between the console and the disk drive. If the connectors or wiring are damaged, replace them.
Display shows: E02 or E06 or E10| A problem has been detected in the disk drive/engine.| Check that the mains supply is according to specifications. Check the drive unit and motor connections, if damaged, replace them.
The display shows: E03| A problem has been detected with the speed sensor.| Check all connections, if the motor or control unit is damaged, replace it.
The display shows: E04| Tilted belt, motor problem detected.| Check all connections, if the motor or control unit is damaged, replace it.
The display shows: E05| The electrical protection has tripped.| Check that the mains power supply is in accordance with the specifications. Make sure the treadmill is not snagged or unable to rotate because of an obstruction. Check all connections. Check the motor or control for short-circuit faults (usually indicated by a burning smell) and replace parts as necessary
The display shows: E08| A problem has been detected in the control unit| Check all connections, if the control unit is damaged, replace it.
The display shows: E09| A stability problem has been detected.| Ensure that the machine is properly unfolded and placed on a flat and level surface. Check all connections, if the control unit is damaged, replace it.
The display shows: E11 or E14| The power supply protection has tripped.| Ensure that the machine is properly unfolded and placed on a flat and level surface. Check all connections, if the control unit is damaged, replace it.
The equipment is unstable| The surface is not flat| Place the machine on a flat surface. If applicable, rotate the legs underneath the front of the machine to move it up or down as necessary to make the equipment stable.

DECLARATION OF CONFORMITY

We, BESELF BRAND S.L., owner of the brand FITFIU Fitness, with registered office at c/Blanquers, 7-8 43800 – Valls, SPAIN, declare that the MC-160 treadmill, from serial number 2017 onwards, is in conformity with the requirements of the applicable European Parliament and Council Directives:

• Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast).

EN 60335-1: 2012 + A11: 2014 + A13: 2017 + A1:2019 + A14: 2019 + A2: 2019
EN 62233: 2008

IEC 60335-1:2010/COR1:2010/COR2:2010
/AMD1:2013/COR1:2014/AMD2:2016/COR1:2016

The delivered product corresponds to the EC type-examination specimen.

Valls, 25 June 2021,

Mireia Calvet, CEO (Authorised representative and responsible for technical documentation).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>